Marvin's Spacecraft (to fit 3D Hubs Marvin)

Last crawled date: 6 years, 1 month ago

So many of us out there printing the excellent Marvin the Martian model that I figured it would be fitting for him to have a vehicle to suit complete with navigation console and landing gear.

You can choose to print with or without the landing gear.

The spacecraft has been modeled to fix a standard sized Marvin print. If you print, or have printed, a scaled version of Marvin, you will have to scale the UFO respectively.

My Print Settings: (your settings may vary)

Filament Type - ABS Extruder Temp - 270C Layer Height - 0.2mm Infill - 10% Infill Type - Rectilinear Perimeters - 3 Solid Top/Bottom - 3 Extrusion Width - Perimeters and Top Solid Infill set to same as my nozzle size (0.4mm) every where else default (Not required but helps to make a nice sealed print) Print Time - 2 Hours~

If you print the landing gear separately from the UFO you may have to have a lower extruder temp and slower printing speed. ABS juice or glue can be used to secure the landing gear in place if required.

You can find the Key Chain-less 3D Hubs Marvin model here:
http://www.thingiverse.com/thing:716077 published by brainfloat that I have pictured or the excellent Marvin Advanced published by Shanny Shine https://pinshape.com/items/4331-3d-printed-marvin-advanced.