External battery lightsaber star wars / star wars lightsaber powerbank with Aukey 5000mAh

Last crawled date: 6 years ago

Br.
Make your own portable battery with a unique saber laser design for under 20 €! To do this, follow these steps:

1- buy the PB-N37-Gray-FRA battery, an external battery from Aukey of 5000mAh. It is available in black for 14 € on amazon https://www.amazon.fr/dp/B01CI2C2I0/ref=psdc_5520534031_t2_B015XJ6N2Q?th=1
you can also find it in month of 10 in gilded https: // www. Amazon.com/dp/B01B1FZU8E/ref=psdc_5520534031_t2_B015XJ6N2Q?th=1
I do not recommend using another battery because its dimensions may not correspond with that of the saber-shaped shell. However, if you still want to use another model, please check that it is approximately 9.1 x 3 x 3 mm.

2- download and print the 3D model that I propose. You can smooth the surface with sandpaper if 3D printing is not very fine. You can print your object in black or paint it for better rendering.

3- Insert the battery into the printed shell in the direction shown: the USB connectors on the bottom of the shell (on the plug side) so that they can be reached once the plug is closed.

4- screw the cap on the bottom of the lightsaber. You can now use your battery lightsaber. Certainly this one is more bulky than a "classic" battery, but it will make you a Jedi.

Do not hesitate to send me your questions and send me the realization of your 3D printing.