BfB.12KK

...use 3rd party hot-end but didn't get around to do anything about it so last night i came up with this. hope it helps someone!

...ensors to the machine as well for end stops. filament reel holder for bfb or any printer. special note this is a large print job.

... of the device id is 12 mm and the pin to pin is 13mm for the micro switch. printed on a up2 mini pla. perfect print every time.

..."4 ways flux capacitor" printed at 0.2 mm layer (bfb iec...

...v6 hot end's bowden version heatsink, whereas syntaxcapt's original fits the direct drive variant. my first thing. aww.

... i can use 1.75mm filament. this is why i made this adaptor. abs or higher temperature durable materials such as pc are suitable.

...nozzle may crash into the bed. -i recommend setting the z-offset to something like 12mm away from the nozzle before disassembling

...de my own to take standard 26mm tyres you can find for pennies on ebay/amazon etc. arches and light bar - because they look cool.

...t looking container top is hollow bottom is hollow and there is a coin in the bottom that can be customized anyway you would like

...with 6 ways flux capacitor, marlinkimbra (mkduo),,,,,, printed with bfb 3000 iec refurbished...."alligator" on board.... ;) a dream for...