by GrabCAD
ZASTAVA automobile
FIAT Serbia

Zastava 750 FIĆA
The Zastava 750 (Застава 750) was a car made by the Serbian car maker Zavod Crvena Zastava in Kragujevac. It was a version of the Fiat 600 made under licence from 1965, it was longer in length than the Fiat version. The Zastava 750 has a 767 cm3 (0.8 l) engine, which produces 30 hp (22.4 kW) at 5,400 RPM and torque is 38 lb·ft (52 N·m) at 3,600 RPM.[2] It is the smallest car ever made by Zastava. Later on during production, in 1980. the Zastava 850 was introduced, it featured the same body as the Zastava 750 but the engine had a larger capacity. The Zastava 850 is harder to find than the 750 model but both are still widely available in former Yugoslavia.
Zastava 750 is widely known by its nickname "Fića" (Фићa) or "Fićo" (Фићo) in Serbian, Montenegrin, Croatian and Bosnian, by "Fičo" or "Fičko" in Slovene and by "Fikjo" (Фиќо) in Macedonian. The nickname "Fića" comes from the main character of a comic published by the newspaper Borba during the first years of the car's production.
Production of the Zastava 750 began on 18 October 1955 and ended on 18 November 1985. The car's popularity has started increasing in the last years, partly from the low fuel consumption and very cheap price as a second hand vehicle. Also it starting to become a symbol for nostalgia, and many youngsters that need cheap utilitarian vehicle with a bohemian status symbol are buying this car as a second hand vehicle. Because of that prices have risen in the last couple of years and many fan clubs have emerged.

Fiat 1300 (1967)
Zastava 1300/1500
The Yugoslavian automaker Zastava, which was extensively cooperating with Fiat, also assembled the 1300 and 1500, branding them as Zastava 1300 and Zastava 1500, respectively. Zastava went on to produce the 1300 by itself when Fiat in 1967 stopped production. During seventies better equipment was added and models named DeLuxe and 1300E. The production finished in December 1979. 201.160 copies were made since 1961. The car was nicknamed Tristać in Serbo-Croatian.
With all-around disc brakes; rear-wheel-drive, up to 72 horsepower (the engine could propel the car to a top speed of 155 km/h), the elegant Tristać was Yugoslavia's favorite upmarket car.

Fiat 126p (1973)
The 126 used much of the same mechanical underpinnings and layout as its Fiat 500 rear-engined predecessor with which it shared its wheelbase, but featured an all new bodyshell closely resembling a scaled-down Fiat 127.
Engine capacity was increased from 594 cc to 652 cc at the end of 1977 when the cylinder bore was increased from 73.5 to 77 mm.[3] Claimed power output was unchanged at 23 PS (17 kW), but torque was increased from 39 N·m (29 lb·ft) to 43 newton metres (32 lb·ft).[3] The 594 cc engines were still available in early 1983 production.
A subsequent increase took the engine size to 704 cc in new "restyling" model Fiat 126 Bis (1987–1991), with 26 PS (19 kW) of motive power.

Fiat 126 post facelift (Italy)
In Italy, the car was produced in the plants of Cassino and Termini Imerese until 1979. By this time 1,352,912 of the cars had been produced in Italy.
The car continued however to be manufactured by FSM in Poland, where it was produced from 1973 to 2000 as the Polski Fiat 126p. Even after the introduction of the 126 Bis (a 126p with water-cooled 704 cc engine of indigenous Polish construction), the original model continued to be produced for the Polish market. The car was also produced under licence by Zastava in Yugoslavia. In 1984, the 126 received a facelift, giving it plastic bumpers (for all versions) and a new dashboard. This model named Fiat 126p FL. In 1994, the 126p received another facelift, and some parts from the Fiat Cinquecento, this version was named 126 EL. The 126 ELX introduced a catalytic converter.
Despite clever marketing, the 126 never achieved the frenzied popularity of the 500. The total number of 126 produced is: 1,352,912 in Italy, 3,318,674 in Poland, 2,069 in Austria, and an unknown number in Yugoslavia. For a brief period in the early 1990s, a German company called POP also offered convertible versions of the 126 BIS. Two models were offered: a lesser equipped one called the "POP 650" and a more luxurious model called the "POP 2000".

Zastava 101
Zastava Skala, also known as Yugo Skala, is a generic name for a family of cars built by Serbian manufacturer Zastava Automobili. Based on a Fiat 128 sedan, it was introduced in 1971 and sold as Zastava (Yugo) 128 with a restyled rear panel. Later it became available as a 3 or 5-door liftback, a style that had not been issued in Italy, under the name Zastava 101.
Zastava 101 is widely known by its nickname "Stojadin" (a male name, from the similarity with Serbo-Croatian for 101, "sto jedan").
In the final years of production, the Zastava Skala was available in a single trim level: the 55-horsepower, 1.1-liter, 5-door Skala 55. In 2008, a new Skala could be purchased for just under 4,000 euros, undercutting the Zastava Koral (an ameliorated Yugo).
Production of the Zastava Skala continued for some time after the discontinuation of the Zastava 128. The Skala features a fifth door, making it impressively functional at this price level. Drop the rear seat and cargo space increases from 325 to 1,010 liters.
Due to its practicality and robustness, and thanks in no small part to its low price, the Skala 55 continued to sell well in Serbia until the end of production in 2008. 1.273.532 have been built since 1971.[1]
Zastava in late 2007 estimated that the Skala 55 was the world's second most-affordable car at the time.

The Zastava Koral (Serbian Cyrillic: Застава Корал), also known as the Yugo, was a subcompact car built by the Yugoslav/Serbian Zastava corporation. It was designed in Italy under name Fiat 144 as variant of Fiat 127. The first Yugo 45 was handmade on 2 October 1978 as a Fiat 127, under license from Fiat, with a modified body style. The Zastava Koral was sold with an updated design, priced at about 350,000 dinar (3,500 euro; 4,300 USD), until 11 November 2008, when production stopped with a final number of 794,428 cars. The Yugo entered the United States by means of Malcolm Bricklin, who wanted to introduce a simple, low-cost car to that market. In total, 141,651 cars were sold in the United States from 1985 to 1992, with the most American units sold in a year peaking at 48,812 in 1987. Sales in 1992 were only 1,412 cars. Like the Lada, they are a common sight on the urban landscape in the cities and towns of Serbia, Croatia, Slovenia, Macedonia, Montenegro and Bosnia and Herzegovina.

Fiat 500 l (2013)
The Fiat 500L is a five-door mini MPV based on the design of Fiat 500. It was codenamed Fiat L0 (or Ellezero)[1] during development and was initially scheduled to be launched in 2011[2] but was delayed until the 2012 Geneva Motor Show,[3] and later in 2012 LA Auto Show.[4]
The 500L went on sale internationally from the end of 2012, with the US and UK by spring 2013.[5] Altogether, the 500L is going to be for sale in over 100 countries.[6]
The L stands for Large/Lounge, and the 500L is 4,140 mm (163.0 in) long, 1,780 mm (70.1 in) wide and 1,660 mm (65.4 in) high, a significant 594 mm (23.4 in) longer as well as a little wider and taller than the Fiat 500 and slightly larger than the Fiat Idea. The car is built on the US wide version of the GM Fiat Small platform.[7]
At launch it will be available with a choice of two petrol and one diesel engines: a 1.4-litre 100 PS (74 kW; 99 hp) four-cylinder and a TwinAir with 105 PS (77 kW; 104 hp) featuring six-speed gearboxes; and a 95 PS (70 kW; 94 hp) 1.3-litre turbo-diesel with a five-speed gearbox. A 1.6-litre diesel will be launched later.[8]
The 500L can be specified with an in-vehicle espresso machine that uses Lavazza pods, which makes the 500L the world's first production car to feature such a facility.[9][1
Assembly Kragujevac, Serbia (Fiat Srbija)