GrabCAD
ZIngh BathMop
by GrabCAD
Last crawled date: 1 year, 9 months ago
Basic idea of this Bathroom Mop are 3 equal triangular shapes. The middle triangle is the base shape . The both outer triangles can rotate upwards.
This is done by an integrated spring in the hinging line. The spring is flip-flop type of spring which means that when rotating the spring tension goes to the other side.
In a working situation the both outer triangles have spring force to below which means the cleaning pads are pushed against the floor. When a small surface is needed the both outer parts can be pushed up (by feet or by an edge) and after 45 degrees rotation the springs will work the other way which means the outer parts will stay up.
To get back to the horizontal situation the outer parts can be pushed down by feet again (or a wall, edge can be used). SInce it is very easy to switch between the 1 or 3 pads mode, users can use the 1 pad mode in tight corners and the 3 pad mode at bigger surfaces
The integrated release system are 3 connected triangular plates with pins which are operated by a central axle. This axle is flexible yet a little bit stiff to be able to be pushed down. This axle also reduces the movement of the hinges which makes the mop nicer to work with (adds a bit friction to the hinges)
Since the 3 parts of the release system are connected together by a live-hinge the outer parts can still be rotated upwards.
This is done by an integrated spring in the hinging line. The spring is flip-flop type of spring which means that when rotating the spring tension goes to the other side.
In a working situation the both outer triangles have spring force to below which means the cleaning pads are pushed against the floor. When a small surface is needed the both outer parts can be pushed up (by feet or by an edge) and after 45 degrees rotation the springs will work the other way which means the outer parts will stay up.
To get back to the horizontal situation the outer parts can be pushed down by feet again (or a wall, edge can be used). SInce it is very easy to switch between the 1 or 3 pads mode, users can use the 1 pad mode in tight corners and the 3 pad mode at bigger surfaces
The integrated release system are 3 connected triangular plates with pins which are operated by a central axle. This axle is flexible yet a little bit stiff to be able to be pushed down. This axle also reduces the movement of the hinges which makes the mop nicer to work with (adds a bit friction to the hinges)
Since the 3 parts of the release system are connected together by a live-hinge the outer parts can still be rotated upwards.
Similar models
grabcad
free
Roll the strings.
... the mop. then also move handle upward to move the roller in outward direction. then push the mop pipe downwards at mop is ready.
grabcad
free
Locking Hinge
...there is also an option to lock the hinge in a freely rotating state by twisting the bottom 90 degrees when the hinge is engaged.
grabcad
free
Locking Hinge
...there is also an option to lock the hinge in a freely rotating state by twisting the bottom 90 degrees when the hinge is engaged.
grabcad
free
Casabella Mop Challenge
...etached and stored separately as well if not in use for long.
*stl files has been uploaded.
**iges format file is also uploaded.
grabcad
free
Casabella Bathroom Mop Ver.2
... plastic base . this base can be easily fixed to another top base with rotate and lock mechanism. all other features as in ver 1.
grabcad
free
Casabella Wring String Mop
...ide the tube spiral and upwards, rotating the mop against the bulged inside and taking it up, while removing the water downwards.
grabcad
free
SMART MINI
...ections to gain access to hard to reach places. all parts have been designed with tooling in mind for plastic injection moulding.
grabcad
free
Bath room mop
...even if the rubber get damaged the whole mop need not to be replaced but only the damged part can be changed . thus saving money
3dwarehouse
free
Axle and axle sleeve, weelchair part
...air part
3dwarehouse
axle quik release and axle sleeve for wheelchair #axle #axle_sleeve #eje #push #silla_de_rudeas #wheelchair
grabcad
free
String-mop wringing mechanism
...ack the plates after squeezing the strings. the fore-mentioned spring is shown in the renderings by making the cover transparent.
Bathmop
cg_trader
free
Casabella Design
...stitched so that it can be holded firmly . bathmop mop sweep cleaning innovation innovative household...
grabcad
free
esfregão troca fácil (easy replace bathmop)
... the pressure to down the jaws holding the cloth
the device works only with cable upright .
to drop the cloth, pull the trigger.
grabcad
free
Compact Bathmop
...lding so it minimizes extra parts.
i envisioned the devise being stored in a small cylinder type tube with an opening of 2"
cg_trader
free
Compact Bathmop
...lding so it minimizes extra parts.
i envisioned the devise being stored in a small cylinder type tube with an opening of 2"
Zingh
grabcad
free
Zingh Connection
...ter if you are mounting the metal connection part from above or below. the metal part can be removed by means of a screw driver.
grabcad
free
Zingh Helix trainer
...zingh helix trainer
grabcad
front-end and details will follow a.s.a.p
grabcad
free
Zingh Adjustable Seat
...pensates the movement of the kayak by means of a strong torsion spring. in this way it is far more easy to keep the kayak stabil.
grabcad
free
Zingh Door Reader
...angle (due to the shape of the holder) which makes it far more easy to dial a code than when the device is flat against the wall.
grabcad
free
Umbra Zingh 2
... little force. (only fractions of the force which is currently needed) cad data and explanation of the system will follow a.s.a.p
grabcad
free
Umbra Zingh 1
...stalled by removing the cap and screwing it into the outer housing.
the top-cover of the pump will be connected by spin welding.
grabcad
free
Zingh Crazy Cart Body Design
...s the possiblity to add a handgrip to be able to move the cart when the battery is empty or when you want to store/lift the cart.