GrabCAD
Ultimaker 2
by GrabCAD
Last crawled date: 1 year, 10 months ago
Ultimaker 2 3D printer
Layer resolution: up to 20 micron
Build volume: 23 x 22.5 x 20.5 cm
Position precision X Y Z: 12.5 / 12.5 / 5 micron
Print speed: 30 mm/s - 300 mm/s
Travel speed: 30 mm/s - 350 mm/s
Recommended filament diameter: 2.85 mm
Nozzle diameter: 0.4 mm
Stand-alone SD-card printing
Software: Cura - Official Ultimaker
Print technology: Fused filament fabrication (FFF)
AC input: 100 - 240 V / ~4 AMPS / 50 - 60 HZ / 221 watt max.
Power requirements: 24 V DC @ 9.2 AMPS
Usage cost: ~ €0.05 / cm3 (material and power)
I have revised this model for your convenience. Original step file from the open source package is in the open source folder. Released under Created Commons License
Keyshot file included (all textures applied, just drop it into your project)
Special thanks to
Ultimaker https://www.ultimaker.com/products/ultimaker-2?gclid=CjgKEAjw-6WcBRCsgNjFy-2OuGYSJADf4R2sQfUF5oB4V0F8EDm1GukOjMXL3r9hYIJ6tdcA2H323PD_BwE
https://grabcad.com/daniel.noree for his filament spool
2560 x 1600 and 1920 x 1080 Desktop Wallpaper Images added.
And as always, ENJOY!
https://github.com/Ultimaker/Ultimaker2/
CC-by-NC: http://creativecommons.org/licenses/by-nc/3.0/
Layer resolution: up to 20 micron
Build volume: 23 x 22.5 x 20.5 cm
Position precision X Y Z: 12.5 / 12.5 / 5 micron
Print speed: 30 mm/s - 300 mm/s
Travel speed: 30 mm/s - 350 mm/s
Recommended filament diameter: 2.85 mm
Nozzle diameter: 0.4 mm
Stand-alone SD-card printing
Software: Cura - Official Ultimaker
Print technology: Fused filament fabrication (FFF)
AC input: 100 - 240 V / ~4 AMPS / 50 - 60 HZ / 221 watt max.
Power requirements: 24 V DC @ 9.2 AMPS
Usage cost: ~ €0.05 / cm3 (material and power)
I have revised this model for your convenience. Original step file from the open source package is in the open source folder. Released under Created Commons License
Keyshot file included (all textures applied, just drop it into your project)
Special thanks to
Ultimaker https://www.ultimaker.com/products/ultimaker-2?gclid=CjgKEAjw-6WcBRCsgNjFy-2OuGYSJADf4R2sQfUF5oB4V0F8EDm1GukOjMXL3r9hYIJ6tdcA2H323PD_BwE
https://grabcad.com/daniel.noree for his filament spool
2560 x 1600 and 1920 x 1080 Desktop Wallpaper Images added.
And as always, ENJOY!
https://github.com/Ultimaker/Ultimaker2/
CC-by-NC: http://creativecommons.org/licenses/by-nc/3.0/
Similar models
thingiverse
free
Filament Spool holder for Ultimaker 2 (35 mm in diameter) by SWM
...verse
for usage on ultimaker 2 when using unoriginal filament with smaller diameter on the filament spool than original filament
thingiverse
free
Ultimaker 3 (& 2+) filament drive by Anteino
...tely different.
github: https://github.com/ultimaker/ultimaker3
license: cc-by-nc: http://creativecommons.org/licenses/by-nc/3.0/
3dwarehouse
free
24V 14.6A Power Supply_1_0
...by-nc-sa 4.0 license' info https://openbuildspartstore.com/open-source-license #openbuilds #3dprinter #cnc #linearrail #vslot
3dwarehouse
free
UlTi v1.2.skp 3d printer
...den extruder diameter of plastic - 1.75 mm the minimum layer is 0.05 mm the nozzle diameter used is 0.3-0.5 mm. 0.4 mm (standard)
thingiverse
free
MakerBot Digitizer LaserCat - Layer thickness tests by CreativeTools
...eative tools
home - things - googleplus - twitter - facebook - youtube - instructables - instagram - flickr - vimeo - linkedin
thingiverse
free
Professor McDuckley by 3DprinterOS
...k professor.
printed on the ultimaker 2 via 3dprinteros.
120 microns, 10 percent infill. 75 mm/s
connected via raspberry pi 2.
thingiverse
free
Low poly ring by levenement71
...t 15 mn
you can adjust the size for your finger , default is 65 mm for ring size ( diameter 2.06 mm and 65mm for perimeter )
thingiverse
free
Electrified Terminator with LED eyes by DrPFF
...: 600 mm/min
• normal retraction: 3 mm
• dual retraction: 12 mm
• nozzle diameter: 0.5 mm
• infill: 20%
• perimeters: 2
thingiverse
free
Christmas ornament 'Classic' by Vincent6m
...rinting settings
68.0 x 68.0 x 80.0 mm
approximately 3 hours of printing for a layer thickness of 150 microns.
~ 10 m of filament
3dwarehouse
free
PowerCase Kit
...by-nc-sa 4.0 license' info https://openbuildspartstore.com/open-source-license #openbuilds #3dprinter #cnc #linearrail #vslot
Ultimaker
3d_export
$5
hippopotamus planter pot
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$15
pack 2 cute girls and boys planters
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$15
pack 1 cute girls and boys planters
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
decoration planter pot cute girl 15
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
decoration planter pot cute girl 14
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
deer christmas 6 3d print model
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
cute fat groot
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$20
carl and ellie young 2 - topcake for wedding
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
deer christmas 3
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
3d_export
$5
giraffe planter pot
...should use a good 3d printing software such as “ultimaker cura” with the option; “remove all holes” activated or...
2
3d_export
$15
Pendant lamp Original BTC Stirrup Pendant Size 2 3D Model
...al btc stirrup black stainless steel silver
pendant lamp original btc stirrup pendant size 2 3d model pluscreative 90616 3dexport
3d_export
$99
Buick Skylark convertible 1964 3D Model
...model 3dexport buick skylark 1964 1965 1966 1967 classic 2door coupe sport convertible general motors us american buick skylark...
3d_export
$99
Suzuki Jimny 2013 3D Model
...2015 2016 2-door suv crossover off-road 4x4 mini compact small japan japanese
suzuki jimny 2013 3d model humster3d 72012 3dexport
3d_export
$99
Chevrolet El Camino 1959 3D Model
...us american chevrolet el camino 1959 3d model humster3d 7425 ...
3d_export
$10
2 Thuya trees 3D Model
...2 thuya trees 3d model
3dexport
thuya tree evergreen plant
2 thuya trees 3d model buncic 32968 3dexport
3d_export
$99
Audi R8 Coupe 2013 3D Model
...2012 2013 2014 2015 2-door coupe sport luxury sportcar racing german germany
audi r8 coupe 2013 3d model humster3d 64432 3dexport
3d_export
$95
Falcon3D A319 United Airlines 2 3D Model
...enger modern twin jet civil civilian a320 a321 a318 a319 airbus
falcon3d a319 united airlines 2 3d model falcon3d 68618 3dexport
3d_export
$99
Jaguar E type coupe 1961 3D Model
...type coupe 1961 3d model 3dexport jaguar e-type type 2door coupe 1961 1961–1974 uk sport racing sportcar muscle british...
3d_export
$99
Aston Martin DB4 1958 3D Model
...3d model 3dexport aston martin db4 1958 1963 1958-1963 2door coupe sport car sportcar super racing luxury aston martin...
3d_export
$99
MAN TGS Skip Loader Truck 2012 3D Model
...011 2012 2013 2014 2-axis heavy industrial trucks germany german
man tgs skip loader truck 2012 3d model humster3d 70332 3dexport