Ducati 1098/1198 - Ohlins FGRT211 fork

Last crawled date: 1 year, 10 months ago

The Ohlins FGRT211 fork legs for the 1098 S/R and 1198 S/R/SP.
These are from the new 200 series with TTX-technology, and this is the Ducati application with 100 mm caliper mounts.
Created from measurements on the actual parts, so all interfaces are 100% true, but no internals.
The models are divided in two assemblies, one left leg and one right leg, but as always with fork legs, the bottom legs should be in the same assembly as the wheel, and the top legs in the same assembly as the yokes. The legs are shown here with zero sag, i.e. fully extended.
Basic data are as follows:
Total sag: 120 mm
Spring stiffness: 10 N/mm (standard, but available from 8.0 to 11.0 N/mm)
Diameter of outer leg top/bottom: 53/56 mm
Mass: 3.62 kg for each leg incl. oil