thingiverse

free

Antenna Tube Mount for FPV Drone by Mirko-FPV

...sl2&tag=mirkofpv-21&linkid=ba3217489ae710ce2ce9f3d85e93c3c6&language=it_it&ref_=as_li_ss_tlhttps://ebay.us/6jkuki

thingiverse

free

FatShark FPV Camera Mount - 25mm Tube clamp by AshCooper

...nd nylock screw. for tube mounting, use m3 bolts & nylock nuts, or small zip ties if you want to reposition the camera later.

thingiverse

free

Tail Rotor System For FPV Carbon Tube Tail Air Planes by Filatech

...fpv air planes with carbon tube tail boom tail boom would be 12mm carbon tube u need two pieces of 15x21x4mm slim bearings enjoy.

thingiverse

free

FPV Quad - 45° antenna (tube) holder by lukasdulik

...side) or 4mm (outside). even a 3mm heat shrink will fit because off the cutout. you can use heat shrinks or some rc antenna tube.

thingiverse

free

FPV Receiver antenna tube holder by mr2fpvninjas

...can still come loose if you crash and antenna tubes hit your...

thingiverse

free

Antenna mount for Martian II (FPV, RX 2x3mm tube) by McGiverGim

... frsky (or similar) receiver. they do an angle for better reception and must be builded with flexible filament to absorb crashes.

thingiverse

free

Modular FPV camera mount for 25 mm tube by wizprod

...on killer using a 2-3 mm zip-tie. 2-component features: same as 3-component, but without the lens-hood. lighter and simpler

thingiverse

free

QAV-210 FPV Pigtail and Receiver Antenna Mount for 3mm RC Tube by Krw1500

...update: i tested tpu and it works, but the tubes felt loose so i held them in place with...

thingiverse

free

22/23XX Motor Mount 12mm Tube FPV by BlinkFPV

...gress, keep testing new things, if you wanna give a try here you can download the most updated release! enjoy and let me know! :)

thingiverse

free

Drone FPV Tower, Gate / Mods

...drone in fpv. tpu printing. planned for 20mm electrical tubes add hollow foam...

thingiverse

free

Super cheap Indoor FPV gates and towers from 14mm PVC tubes

... diameter variation between different vendors, resize if necessary. i printed mine in pla with 3 outer perimeters and 33% infill.

thingiverse

free

Carbon Tube FPV Racer (quadcopter) by nickpgre

...tape for esc's caps and attaching escs on the tubes tireups should not be very tight. *electronics 4x racerstart...

thingiverse

free

Quanum FPV Goggles v1 & v2 Extension Tube for 4.3" & 5" Monitor by lanyx

...mechanical (excellent 3d software for free), i've included the native files for you to play with and customize as you desire.

thingiverse

free

DJI FPV Goggles Protector easy tpu print by Bobberen

...les protector easy tpu print by bobberen thingiverse dji fpv goggles lens protector remix for easy print in tpu with bowden tube

thingiverse

free

FPV Cycle Glide Caddx Vista Antenna Mount by BlakeLT01

...giverse this is for the fpv cycle (kababfpv) glide frame with the caddx vista antenna but can be used with any 4mm antenna tube.

thingiverse

free

RC plane engine mount by northshore

...rc plane engine mount by northshore thingiverse engine mount block to go inside the square tube of the axon fpv flyer.

thingiverse

free

FC Mounted Receiver plate with antenna mounts for FPV Drones

...mounted receiver plate with antenna mounts for fpv drones thingiverse a standard fc size mount. uses standard size antenna tube.

thingiverse

free

VTX holder by Dennis321

...fpv transmitter (e.g. 20x30mm). fits perfect on 16mm carbon tubes ...

thingiverse

free

Practical FPV Antenna Mount by mcometa

...antenna tube holes: 2.62mm about the size of a ball point pen ink tube not too much angled because i can bend the antenna anyway.

thingiverse

free

FPVModel RaceGates - LED tube clip holder by nitbeat

... first attach the small hole of the clip to the gate frame, then attach the flexible led tube. hope it helps, cheers, nitbeat fpv

thingiverse

free

Motor mount for 30mm carbon fiber tube for airplane by Flying_Ginger

...or mounting the t-motor mn3508-20 580kv to a carbon fiber tube. i am going to use this as a nose for a very streamline fpv plane.

thingiverse

free

Ghost FPV Rail mounting System with Landing Skids V2 by deckernico

...landing system i created to use 8mm carbon fiber tubes as a rail system. you can mount batteries or...

thingiverse

free

Diatone ET180 FPV Camera and Antenna holder by Foliengriller

...upward. additionally you will need one or two plastic tubes for the...

thingiverse

free

fpv phone rig by subman99

... cardboard or really any type of video source like watch you tube or netflix on. and i did put in the solidworks files as well.

thingiverse

free

Antenna Guide for Froggy 150 micro FPV Racer by RobertCL

...robertcl thingiverse use this and a couple of antenna tubes to stop your rx antennae getting chopped up in...

thingiverse

free

Fatshark 600tvl fpv camera mount by Multihjalle

...hed easy and fits nice . a protection tube around the lens to protect the camera lens and body when crashing. feel free to modify

thingiverse

free

Basic holder for auxillary equipment. Mounts to standard 16mm carbon tube of Tarot 650, 680, 690 by mrdROb

... thingiverse just a simple universal holder, which mounts to the stantard tube d=16mm. i place fpv tx and rc rx on pair of these

thingiverse

free

DJI antenna GPS and Immortal L Crossfire TBS Source One HD V4 freestyle drone by aagarmon

...the immortal l configuration with tbs crossfire using forever tubes and the stock crossfire whip antenna. gps is sized...

thingiverse

free

Nemesis X - Antenna Tube Mount and Caps by BRDMdesign

...caps to keep the dirt out of the antenna tubes parts designed, and photos created by maximus fpv (maxwell...

thingiverse

free

T280 3D Printed Mini FPV Tricopter by Filatech

... carbon tube tail mechanism: direct drive micro servo pilot camera damp mount hd camera damped/inclined adjustable mount enjoy :)

thingiverse

free

Micro Canopy w/ Antenna Tubes and VTX Strap by prysm816

...better suit m2 screws. this will fit 19x19 format fpv ...

thingiverse

free

FPV Drone Gate Peg

...pegs and use a string to set the feet distance. the hole in the base can also be used for staking the gate to the ground outside.

thingiverse

free

FPV Cycle Fouride CRSF VTX Antenna Mount by Goz72

... vtx antenna designed to be a snug fit for the antenna tube so it can't be ripped out to easily. print in tpu, with supports

thingiverse

free

Tarot T-2D V2 Adapter for 8mm tubes by Astrafreak

...8mm tubes and 67mm distance i use this landing gearhttp://www.ebay.de/itm/landegestell-fpvmontage-multicopter-8mm-dji-f450-f550-u-baugleiche-/291738745932?hash=item43ecfbfc4c ...

thingiverse

free

Double Antenna Receiver Support Realacc X5R, X6R by HTeixeira

...ps://www.banggood.com/receiver-antenna-protection-case-fixed-tube-for-fpv-racer-p-1167777.html?rmmds=myorder&cur_warehouse=cn

thingiverse

free

martian fpv quadcopter antenna by paulyman1

...prodides a better mount for mounting the 3mm antenna tubes and also adds protection to the vtx antenna and...

thingiverse

free

AOMWAY 500mW FPV Holder by petrex

... aomway 500mw on 10x10mm carbon fiber rod. you can print different size or type for for example tube and just glue them together.

thingiverse

free

rCamQuad by Roxeh

...tubes in length of 180mm. legs are 6mm carbon tubes and can be mounted to base's holes or arms...

thingiverse

free

Wltoys 144001 FPV / Camera conversion

...m3 screws. use front and back mounts with carbon tubes (cut them in length) to create support between front...

thingiverse

free

Panda280 3D Printed FPV Racing Miniquad by Filatech

...ed inside the arms or mini escs to be fixed inside the fuselage. flight video: https://www.youtube.com/watch?v=szuj6vccq2k enjoy.

thingiverse

free

TES Xiaomi Yi and FPV mount for Teksumo, popwing or similar by kakemanx

... sequre.. glu if needed (but dont think its neccesary.. enjoy! tags: teksumo fpv xiaomi yi servo popwing flying wing camera mount

thingiverse

free

IFlight XL7 V2 TBS Crossfire Receiver, Antenna & FPV Pigtail Mount by grammo

...pu mount that fits tight over the rear standoffs to hold the crossfire micro receiver, an antenna tube and the tbs unify pigtail.

thingiverse

free

TBS G2 FPV Cam Receiver Antenna Mount Center Mount Dipole Vertical by grammo

...ified my center mount again to support the crossfire stock antenna in vertical configuration using a forever tube for the antenna

thingiverse

free

FPV Pan mount for TGY-1800 180 degree servo. by omegooliebird

...han one plane. requires 6mm carbon-fibre tube x 90mm long. cables go in the triangular slot in the aerofoil section of the stand.

thingiverse

free

Quad F280 simple by crysis_ps

...s or for non-fpv flight. you can change it from 220 to 280mm. it's need to use the aluminium tube 10mm diameter, 16 m3 bolts.

thingiverse

free

Anunnaki LowRider Session + Runcam Micro mount by Mally

...ection + antenna tube mounts for use with 10mm standoffs on the anunnaki frame for maximum lowness.^ designed by ole herman godøy

thingiverse

free

Add-ons for XUAV-Clouds FPV aircraft by Noircogi

...d cam. (this one in particular: https://www.banggood.com/fpv-13-sony-ccd-800tvl-fpv-camera-for-qav250-fpv-racer-p-1049331.html )

thingiverse

free

Space 225 FPV Frame Antenna mods by Iron-Hide

...bottom of the supplied canopy. fits 3mm od antenna tubes bought mine from...

thingiverse

free

DJI Phantom FPV monitor and receiver holder by ILse51

... made from 145 x 6 mm aluminum tube. the length can be adjusted to suit personal requirements accordingly. nuts and bolts are m4.

thingiverse

free

Foxeer 25mw TM25 VTX holder with receiver tubes 31mm standoff distance by mr2fpvninjas

...ut of tpu or petg or similar material 31mm standoff distance for quadcopters, drones, fpv racing designer by pukki34 on tinkercad

thingiverse

free

EMAX Hawk 5 wall mount by Joza

...ate. mounts the drone nice and flush against the wall. hangs it by the shrink tube. no provision for screw, intended to be glued.

thingiverse

free

ImmersionRC Duo mount by smitty_fpv

...ld it tighter. the clip can be attached horizontally or vertically. see more info at https://www.youtube.com/watch?v=zpkod7mt5yc

thingiverse

free

SourceOne 20 Degree Session Mount with Rear 19x19mm FPV Cam Mount

...ho like cheater quads. there is also a tube running up the back of the mount to run the wiring down for a nice concealed look. (:

thingiverse

free

rush fpv tank mini 20x20 spacer (M2 screw) by Durzo42

...pleased. antenna mounts are made to accept rdq antenna tubes im using rush fpv tank mini 20x20, xm+ rx,...

thingiverse

free

H-copter FPV CAM mount by shawdreamer

...ections (i will be installing a ir-cut lense onto the cam and the mount gives clearance for the rear socket connections required)

thingiverse

free

Sidewinder X1 Bowden holder by CRYSIS-FPV

... you are running the sidewinder x1 - z brace by double_mirages it will help as i run the ptfe tube through the brace. see photos.

thingiverse

free

FPV Racing Flag by trappy

...eam-blacksheep.com/products/prod:fpv_flag_start checkpoint/turn flag:http://www.team-blacksheep.com/products/prod:fpv_flag_turn

thingiverse

free

Pitot Tube Mini-Mount by markqv

...that will accomodate many of the all metal pitot tubes sold by most fpv suppliers. a drawing of the...

thingiverse

free

Awesome F200 Drone RX Antenna Mount Bracket by ta5jda

...nice awesome f200 frame; https://www.banggood.com/awesome-f200-200mm-4mm-arm-fpv-racing-x-frame-carbon-fiber-cnc-aluminum-alloy-p-1142330.html made for standard 3mm tubes only 60º antenna seperation i'm afraid, i couldn't fit...

thingiverse

free

Quanum Venture FPV pontoons by Runurnext

...oles 30mm deep. clamp 10% infl 0.8mm wall 0.8mm top/bottom. connector what e u whant. half tube 0% infl 0.8mm wall 1mm top/bottom

thingiverse

free

X-UAV One Forward bay cover by Eckythump

...and a friction fit in the bay. a section of the gripper on one side is removed to clear the pitot tube sensor fitted to my plane.

thingiverse

free

Real4 / Matian IV Antenna holder and Matek led holder by pbootsma

...led holder by pbootsma thingiverse antenna holder for these tubes https://www.banggood.com/10pcs-200x3x1_5mm-receiver-antenna-protection-tube-fixed-pipe-shielded-tube-p-1202550.html and this matek led board: https://www.banggood.com/matek-led-tail-light-ws2512b-with-loud-buzzer-dual-modes-for-fpv-racer-multicopters-p-1104158.html it slides...

thingiverse

free

Project NEMESIS II (FPV Tricopter) BETA by zatorax

...ors 1000kv battery up to 5000mah hover time ~ 25min. (servo-gimbal+sj4000+lipo[316g]) mass ~700 gramm without camera and battery.

thingiverse

free

Project NEMESIS [FPV tricopter] rev03 (CLOSE) by zatorax

...ass ~700 gramm without camera and battery. http://www.youtube.com/watch?v=xrw8mbgwvqqhttp://www.youtube.com/watch?v=qmcg7nwxn9s

thingiverse

free

Armattan Mongoose Standard FPV Cam Mount and Antenna Mount by leeygbaik

...eed glue). update 23/mar/2018: add hd cam mount for gopro type camera. mount on 4 available hole at top plate. need m3x8 and nut.

thingiverse

free

Pool Noodle FPV Racing Gate by dansleeth

...e and make the noodle bend). i have also included a tube you could use to join two 65mm noodles together. all peg holes are 6mm.

thingiverse

free

Falcon Q250 v1.0 by mochr

...m pla 20-30% infill copter is still " work in progress" not tested yet.... more info: https://sway.com/uzdvn2dr256vbord

thingiverse

free

Ramasseur plots FPV racing by Florentf31

...implement ajouter un tube pvc de 50mm de diamètre et un ressort. https://www.youtube.com/watch?v=77ccgzqksn0&feature=youtu.be

thingiverse

free

Tarot T-3DIV Gimbal Airplane Mount by Filatech

...the mount and lock the gimbals ring around the tubes i used metalic dark grey filatech pla filament to...

thingiverse

free

Eagle Tree Vector - Pitot Tube Mount by markqv

... the file to get both halves. i printed this in pla+ but will re-do it in abs to get the uv protection. the resolution was 0.1mm.

thingiverse

free

FPV Pentagonal Race Gate by HTeixeira

...to assembly and dissasembly. i use 25mm electrical plastic tubes with 90cm which makes a gate with 145cm at...

thingiverse

free

SkySurfer FPV Canopy by Schrauber601

...sink to your vtx (used in my model: eachine tx1200) attach a tiny heatsink on the split camera too mount split camera upside-down

thingiverse

free

TheD Nighthawk 250 Slim by atombot

...round standoffs 4x 3mm nylon nuts 2x 3mm antenna tubes designed for fatshark fpv cam. others will not...

thingiverse

free

HobbyKing Bonsai Mini Popwing FPV Pod by bmacw

... new files *_pt for printer with poor tolerance. print these files first, you should have minium clean up to do for easy fitting.

thingiverse

free

Durafly Efxtra FPV and FC pod

...for electronics standard size fpv camera sma connector antenna tubes magnet it's recommended to print the pod upside down....

thingiverse

free

Arrow Tail Fin Joiner (for RC Wings) by Qrome

...fin and glue it in the slot. the carbon tubes are then fit up into the wing and glued...

thingiverse

free

Collapsible Bungee Tow Hook by markqv

... find the aluminum tube material at a local hobby store. then follow the picture on drilling and shaping the tube befor assembly.

thingiverse

free

FPV Camera Mount - Fat Shark style CCDs for MultiRotor H Body Modular System - with OpenSCAD Source by MichaelErwin

...nd slide in camera retainer. the slide in camera retainer, is offset by 1mm to allow for variances in the tvl600 ccd housings.

thingiverse

free

Brushless Motor Tube Mount (12mm tubes, 22xx & 18xx type outrunners) by OnkelPierre

...18xx type outrunners) by onkelpierre thingiverse for my latest fpv mini quad build i wanted to use tubular carbon...

thingiverse

free

Tarot 650 Sport Camera mount V1.1 by Kwad

...to mount the camera direct the the 10mm carbon tubes but you will get vibrations depending to the setup....

thingiverse

free

RotoRev PURR Camera mount/Case 0~45 degree tilt for Eachine TX03 by RotoRev

...fpv racer required hardware : m2 4mm screws antenna tubes ( top standoff ) male/female nylon m3 standoffs nylon...

thingiverse

free

Martian 2 FPV Antenna holder by Rec0iL_One

...included different versions for the diameter of the inner tubes that slide on the standoffs. so for example top535.stl...

thingiverse

free

30x30 VTX03 + micro-camera fpv pod by Mistale

...the fpv antenna using a zip-tie. optionally antenna tubes (forever-tubes can be inserted into the two holes on the...

thingiverse

free

Sirians 3 inch fpv frame parts Hawkeye Firefly camera mount by Hundredacreweeds

...n 1080p max) also a way to hold and protect a runcam phoenix nano possibly other nano cameras https://rotorbuilds.com/build/26929

thingiverse

free

Round LED FPV Race Gate (tiny whoop, 2 inch, 3 inch) 75 cm diameter by skubo

...cm diameter by skubo thingiverse i printed all the tubes and coupler lying down. they get deformed at the...

thingiverse

free

Square tubing quadcopter by RustyPaint

...pdate 8/30/2013, added fpv components. lighter weight version using poplar squares here:http://www.thingiverse.com/thing:143330

thingiverse

free

QKK Fenice V0.2x 250mm FPV Atail quadcopter by Quadkiller

...0mw vtx and fpv tuned 600tvl camera combo it requires a 35x35mm power distribution board, with a directly soldered xt60 connector

thingiverse

free

minipicus3D by JuroH

... at lower speed ... will be added soon : camera mount fot fpv camera, and capture camera with angle adjustment, battery holder ..

thingiverse

free

fouride vtx and antenna mount horizontal by Durzo42

...pleased. antenna mounts are made to accept rdq antenna tubes im using rush fpv tank mini 20x20, xm+ rx,...

thingiverse

free

fouride vtx and antenna mount vertical by Durzo42

...pleased. antenna mounts are made to accept rdq antenna tubes im using rush fpv tank mini 20x20, xm+ rx,...

thingiverse

free

fouride vtx antenna mount horizontal by Durzo42

...pleased. antenna mounts are made to accept rdq antenna tubes im using rush fpv tank mini 20x20, xm+ rx,...

thingiverse

free

Camera stabilizer - Hand Gimbal GoPro 39$ DIY by guillermomaroto

...8650 in series a switch check out our new motorized camera sliderhttp://harrope.com/en/s1-motorized-camera-slider-panning-motor/

thingiverse

free

MetalSlug 250 FPV Racer quadcopter by crisiinvolo

...removed internal carbon plate and all screws. now motor tubes must be glued with fluid cyano to one semi...

thingiverse

free

Racing Quadrocopter Stable by Joe_D

... data: dimensions prop center to center length 225mm width 235mm lower base 230mm (free to change but my esc's are to big :d)

thingiverse

free

ImpulseRC APEX XM+ holder by KILD

...even with exotic ones. you will need two antenna tubes like...

thingiverse

free

Tramp HV housing by Xroberto

...housing for tramp hv vtx side features to add tubes for antenna compatible with: realacc x210 v+ 214mm 6k...

thingiverse

free

Rack for Turnigy Talon 2.0 Frame by Frederickh_f

...talon 2.0 frame that uses 14mm diameter carbon fiber tubes for arms. it creates a nice space for fpv...

thingiverse

free

Carbon V-Quad by PolakiumEngineering

...many vibrations to the camera as possible. the carbon tubes and rubber dampers are common parts for xaircraft frames...

thingiverse

free

FPV King XL7 Hero 7 Mount 15 Degrees by Orion36

... check out my freestyle you tube channel. https://www.youtube.com/watch?v=c0wtfgpl_bg&list=plptxxojfwfivj00qd4werpzd00ornutky

thingiverse

free

Axel's 3D printed quadcopter V2(carbon fibre arms) by Axbri

...by glueing the motor mounts to the carbon fibre tubes then glue the arms to the main baseplate, while...

thingiverse

free

MRX H-Quad by MattRuwe

...kk2.1 or naze32 flight controllers. notes: the carbon fiber tubes are friction fitted between 3d printed plastic that is...

thingiverse

free

Micro Swift and VTX Backpack mount - TacoRC 3DPower BabyHawk 100-BLAC-SX Stretch by moteasa

...tinkercad. 45 degree version added with holders for antenna tubes and longer standoffs that can be trimmed to desired...

thingiverse

free

Long flight time 270mm quadcopter by antonpo

...be specified) total flight weight: 395g arms: 10mm aluminum tubes (probably carbon is suitable) motors: gartt ml 1806 1400kv...

thingiverse

free

GB130 Frame addons [Leg/motor quard, LED mount, Camera Mount for MC02 and TX02] by slibbinas

...ww.banggood.com/lantian-8-x-ws2812b-driving-led-lights-board-strip-built-in-full-color-for-naze32-cc3d-p-993057.html?rmmds=search

thingiverse

free

FPV-Racer Hammerhead 190 22xx Motors by btotherunner

...m spacer) 06.02.2016 --> change the bottomplate - set new pdb holes 12.02.2016 --> change the bottomplate - new motor holes

thingiverse

free

bungee launching plateform by Badassdrones

...4x screw holders 3) cut the 20mm ext diameter tubes in the right dimensions for your plane (17mm diam...

thingiverse

free

Uber 180 Remix - Standardized 10mm tubes - New Top/Bottom Plates by jolars

...top plate' - simple with a cutout for a fpv camera and some areas to attach vtx and other...

thingiverse

free

Quad VTX + TX Antenna Mount by BL_Ali32

...order&cur_warehouse=cn printer: ender 3 pro made with tinkercad https://www.tinkercad.com/things/fdhrxweintt-vtx-90-test/edit

thingiverse

free

Cubic tower gate by juha_j

...ttps://www.youtube.com/watch?v=4qwfobdgedm&feature=youtu.be&t=7m19s correct name for this gate structure is welcome... :)

thingiverse

free

HK Godiscover nose for Mobius brushless gimbal by chrishornby

...need some 12mm dia tube. i used carbon fibre but virtually anything would do. you could even print the tube if you cant find any.

thingiverse

free

Chameleon TI antenna holder by kwabratseur

...original back-plate has 3 rubbers to mount the antenna tubes and sma-connector for 5.8ghz fpv antenna. these rubbers wear...

thingiverse

free

Full Speed Leader 120 Antenna Mount by Mike-vom-Mars

... use shrink tubings (also as shown in the pictures). no infill required. full speed leader 120 mini quad: http://bit.ly/2lqsvee

thingiverse

free

1.3ghz Right Hand Turn Helical FPV Antenna by Kawobei

...omething smaller to wind it onto first to stop the spring back of the copper. i used a copper sticky contact for the reflector.

thingiverse

free

Flying Peach - 1407 by Babouch

...antenna https://www.banggood.com/eachine-x73-micro-racing-quadcopter-spare-parts-fpv-5_8g-vtx-antenna-p-1092506.html?p=my23025537272201607r m3 screws https://www.banggood.com/340pcs-m3-a2-stainless-steel-hex-socket-screws-nut-assortment-kit-p-1109208.html?p=my23025537272201607r buzzer https://www.banggood.com/5-pcs-super-loud-5v-active-alarm-buzzer-beeper-tracker-95_5mm-for-racing-drone-p-1117207.html?p=my23025537272201607r heat shrink tubes https://www.banggood.com/30pcs-5-size-halogen-free-41-heat-shrink-tubing-wire-cable-4mm-16mm-black-p-1079439.html?p=my23025537272201607r props https://www.banggood.com/kingkong-3030-3x3-cw-ccw-propellers-for-multicopters-fpv-racer-red-black-p-1074758.html?p=my23025537272201607r or https://www.banggood.com/8-pairs-kingkong-3x3x4-3030-4-blade-propeller-cw-ccw-for-fpv-racer-p-1083923.html?p=my23025537272201607r battery 4s 850mah -...

thingiverse

free

Morphite X155 camera mount by vzzbx

... either side of the camera. mount the lens and adjust focus. the original openscad files are provided to allow for customisation.

thingiverse

free

2.4GHz antenna boom holder for Eachine 250 FPV Quadcopter by HenningS

...its into the frame (frame design is not for printing purposes). prints well in pla with 40% infill and w/o any support structure.

thingiverse

free

Atom by mrexcavator

... the frame has a recess for a receiver like a flysky fs-a8s. fits best without the schrink tube. topplate is glued on the canopy.

thingiverse

free

FPV Quad Antenna Holder and Battery Spacer by HWAsian

...so i made a spacer for the battery. i also designed an integrated antenna holder. it is at 50 degrees to make it easier to print.

thingiverse

free

Horizontal Antenna Mount by punkkills

...by punkkills thingiverse i am sick of breaking antenna tubes and occasionally chopping rx antennas. i designed the part...

thingiverse

free

Sony Effio 700TVL FPV Camera Mount (28mm Hole Spacing) by Browny_37

...ash as the camera is sat against the rubber and allowed to move slightly under impact. pictures will be uploaded at a later date.