thingiverse

free

threaded 8mm to 5mm stepper coupler by aaacomputer

...threaded tap. 5mm side is 5.25mm to accept stepper motor both are secured with short 3mm screws that come with most printer kits.

thingiverse

free

Stepper Motor 5mm shaft to 8mm Threaded Rod Coupler

...r coupler 5mm stepper motor shaft to 8mm trapezoidal lead screw self centering rigid coupler. ideal for mpcnc or z-motor coupling

thingiverse

free

Parametric Z-axis coupler (stepper and threaded rod coupling) by aspesilorenzo

... / threaded rod coupler. variable names should be self-explanatory, the default values are meant for a nema17 motor and a m8 rod.

thingiverse

free

Shaft Coupler for NEMA 23 to 1/4" threaded rod by PacManFan

...the motor shaft to use a section of rubber surgical tubing to allow for some play in the output. this is a self-aligning coupler.

thingiverse

free

Z-coupler for 5/16" threaded rod by DirtySteve

... 2 pieces per motor and assemble with m3 screws and nuts. i made these to eliminate z-wobble on my prusa-mendel variant printer.

thingiverse

free

5/16"-18 Threaded Rod Captive Coupler by davezdesignz

...sign i am currently working on. paused at layer 34 using the change filament at z cura 15 plugin by rawlogic here on thingiverse.

thingiverse

free

Parametric Z-axis coupler (stepper and threaded rod coupling) MOD by yohabi

...readed rod coupling) mod by yohabi thingiverse due to flat long-side surface: easier to print better torsional strength achieved

thingiverse

free

3/8 threaded rod to keyed 6mm shaft con-helical coupler by tray_withdraw

...uple the 6mm shaft of a dc hobby motor to a 3/8" threaded rod to make a cheap linear actuator. used m3 screws and hex bolts.

thingiverse

free

Z Rod Coupler: 4.5mm flat motor shaft to 5mm threaded rod by swapsCAPS

...th a 4.5mm flat sided shaft to a 5mm threaded rod. use m3 10mm hex bolts together with m3 lock nuts to screw the pieces together.

thingiverse

free

Kardan, Flex Joint, Coupler 8mm threaded rod, 5mm motor shaft by ToM_Korn

...rse i have 2 8mm threaded rods on my mendel max. so i adjusted the original design to fit my needs. the motor side shaft are 5mm

thingiverse

free

E3D Pneumatic Bowden Coupler with tapered thread / Coupling 1/8" 1/8 PC4-M10 by GlynD

.../8 pc4-m10 by glynd thingiverse a tapered thread coupling for bowden tubes. remixed so that it sits in a standard e3d type slot.

thingiverse

free

3/8" threaded rod to 5mm Stepper shaft coupler with set screw by tweaker123

...ith set screw by tweaker123 thingiverse centers rod fairly well to the stepper motor, and then tighten it up with 6-32 set screw

thingiverse

free

Ender & CR10 Filament Extruder Block with Threaded Coupler and Nut by FedorSosnin

...printing. i found this genius printable coupler but the threads were so weak that it broke when i was...

thingiverse

free

Threaded Rod De-Wobbler - Tapered Coupler by janbbeck

.... this thing here seems to be a better solution, though. i have not been able to install it yet, but i wanted to share it anyway.

thingiverse

free

NEMA17 stepper to M6 Thread Rod Solid Coupler by AutoX3D by largeformat3dprinter

...l works wonderfully. rectilinear infill works also but there is a slight edge in the honeycomb infill with this particular shape.

thingiverse

free

9g servo arm top coupler to threaded rod by Schorhr

... nut to the m5 threaded rod holder. thanks to floush, talpa and also zippy for the ideas & comments on the initial design(s).

thingiverse

free

Parametric Z-axis coupler (stepper and threaded rod coupling) single object by 3DGenie_xyz

...-axis wobble and all my thanks for this simple but great model goes to aspesilorenzo. if you tip me for this one, tip him, too ;)

thingiverse

free

Z-Coupler v1 with Flex Chamber 5mm Stepper to 5mm threaded rod by cocktailyogi

...ngiverse.com/thing:22390 mod to 5/5mm adjusted screw dimensiones. i sliced with slic3r 1.0.0 rc3 and it works fine. have fun.

thingiverse

free

male coupler by Gcode_Art

...male coupler by gcode_art thingiverse male coupler for m8 threaded motor shaft.

thingiverse

free

Filament filter (M10 thread) and coupler (v10) of Martusha Filament System - pls put 'LIKE'

...s://www.thingiverse.com/thing:3995950 wrench holder for appended to set arcylic wrench: https://www.thingiverse.com/thing:4031319

thingiverse

free

Updated coupler (Version 08) - M10 thread standard bowden extruder coolend coupler for Martusha Filament System

...s://www.thingiverse.com/thing:3995950 wrench holder for appended to set arcylic wrench: https://www.thingiverse.com/thing:4031319

thingiverse

free

Shaft Coupler 5mm by JordanMac

...shaft coupler 5mm by jordanmac thingiverse coupler for 5mm shafts, ideal for attaching m5 threaded rod to nema 17 shaft.

thingiverse

free

Printrbot Plus Z-Axiz Motor coupler. by Kannonballer

... coupler. replaces the existing two piece coupler. much easier to maintain threaded rod alignment than with the original coupler.

thingiverse

free

Shaft coupler by creationmz

...haft coupler by creationmz thingiverse it's a fast edited coupler. d1: 5mm (for nema17) d2: 8mm (for shaft or threaded rod)

thingiverse

free

my z coupler by straighttruck

...my z coupler by straighttruck thingiverse round z coupler 1 piece holes for set screws made to fit 5mm threaded rod

thingiverse

free

Ender 3 PTFE Coupler/Fitting Mount - Filament Guide by Joeyvq

...at first. slight warping can cause issues with the threads closer to the bed. threading it in from the...

thingiverse

free

Darth Maul Lightsaber Coupler by turtleboy211

...requires rework. printed at 90 degrees to strengthen the threads used sainsmart aluminum metal 1.75mm pla...

thingiverse

free

Caliburn & TalonClaw Beefy Milan Coupler by Sillybutts

...and talonclaw. this is not as good as getting an alumilan kit from slug, but it is better than the default printed milan coupler.

thingiverse

free

5mm to 3/8inch (9.525mm) coupler by Flytech81

...r by flytech81 thingiverse this is meant for a 5mm stepper motor shaft to 3/8inch (9.525mm) threaded rod conversion. z - coupler

thingiverse

free

Standard M6 thread Bowden extruder cool-end coupler for Endpoint ver5 of Martusha Filament System

...r for handle: https://www.thingiverse.com/thing:3984657 spacer for special 2-roll mode: https://www.thingiverse.com/thing:3995950

thingiverse

free

Filament filter with coupler for Bowden M6 thread extruder (4 Martusha Filament System)

...s://www.thingiverse.com/thing:3995950 wrench holder for appended to set arcylic wrench: https://www.thingiverse.com/thing:4031319

thingiverse

free

Z-Coupler with grip

...m threaded rod aswell the possibility to insert a nut at the top end that can be thightend with an additional nut to fix the nut.

thingiverse

free

Geeetech Aluminum Prusa I3 Floating Z Axis by theburrito

...ble or if centering couplers are used.i have plans for another revision that recesses the thread adapter into this piece further.

thingiverse

free

Adapter for 1/2"-20 bolt to 6 mm flexible coupler by squonk

...ded end of a 1/2"-20, fine thread bolt to a flexible shaft coupler. i used it in building my 6dof motion simulator platform.

thingiverse

free

master replicas Darth Maul coupler

...light sabers in the mail. it fits nice and threads in smooth as long as the threads inside the...

thingiverse

free

Prusa i3 Z-axis Coupler by rj_168

...od and stepper motor 5mm to 5mm coupler 3mm bolts used try not to over tighten or it may split has worked very well on my printer

thingiverse

free

Creality CR10 Filament Extruder Block with Threaded Coupler, Nut and Spanner by misubisu

...e started to slip. tighten it a little more with the spanner and its perfect. just finished 25 hour print and no slippage at all.

thingiverse

free

Customizable Coupler by bonm014

...nnect two rods to each eachother. i found out that a thread rod is connected better when a double nut is used within the coupler.

thingiverse

free

5mm to 8mm Z axis shaft coupler by mrice

...ible shaft couplers on z axis rods, for 5mm motor shafts and 8mm threaded rods. use two m3x10mm screws and nuts to tighten down.

thingiverse

free

Coupler for standard M10 thread coolend / bowden extruder for v5 endpoint of Martusha Filament System(details please find at description)

...r for handle: https://www.thingiverse.com/thing:3984657 spacer for special 2-roll mode: https://www.thingiverse.com/thing:3995950

thingiverse

free

M6 Coupler by ranyardm

...m6 coupler by ranyardm thingiverse for getting the extra length out of m6 threaded rods, carriage bolts etc.

thingiverse

free

3/8 to 5mm coupler by Flytech81

...3/8 to 5mm coupler by flytech81 thingiverse 3/8 to 5mm coupler hardware: 3/8 threaded rod 2 - 3/8 nuts 1 - m4 nut 1- m4 x12 bolt

thingiverse

free

PTFE adaptor by Greenthunder

...is a remix of the ptfe coupler with the threads removed and the hole resized for a friction fit...

thingiverse

free

car vacuum hose coupler by Unstableboy

... other size hoses but note. it is left handed thread. you may be able to mirror it in your slicer if you need standard threading

thingiverse

free

Original Printrbot Z Coupler by JasperJ

...rbot. print two and add a few nuts & bolts. not entirely sure if this version uses the same threaded rod as the simple...

thingiverse

free

Geeetech A30 control box extension coupler, M20 aviation connector

...easier to find on aliexpress than the kind that threads onto another plug, but without this coupler the connection...

thingiverse

free

power transfer coupler v6 by nottmgage

... coupler from 6mm motor shaft to 8mm threaded rod specifically meant for z axis attachment holes fit bolts up to 5mm in diameter.

thingiverse

free

7mm smooth to 1/2" acme coupler by crumrw

.... m4, 6-24, 6-32, or smaller machine screws should work. requires: 6- machine screws (m4, m3, 6-24, 6-32, or equivalent) 6- nuts

thingiverse

free

Liquid Soap Drainer by TheSwaggamuffin

...24mm, pitch around 3mm. have included a smaller thread testing part that prints quicker to see if it will work with your bottles.

thingiverse

free

Flexible finger by Mathieu314

... fix this to a motor and a 8mm threaded rod the threaded rod coupler can be found here : http://www.thingiverse.com/thing:1329750

thingiverse

free

Lightsaber Emitter (lightsaber creation kit) by saschodebeer

...ber creation kit) by saschodebeer thingiverse made an extra emitter. needs another coupler, prints easier with an inside thread.

thingiverse

free

Self-centering tapered-thread Z-axis coupling [v2] by loco

... 5/3, 5/4, 5/7 + nuts 02/04/16: added [v2.5] coupler 5/6.35 03/12/16: added [v2.5] coupler 5/5 05/26/16: added [v2.5] coupler 5/8

thingiverse

free

Hotend mount with bowden coupler for X modular carriage by Buzzz57

...a single piece of plastic. you can combine this mount with my dual 40mm fang fan duct : https://www.thingiverse.com/thing:3241922

thingiverse

free

Toyota Gearshift by moonshineheadache

...adache thingiverse hole is designed to receive an 8 x 1.25 thread coupler suited for toyota trucks and possibly other vehicles.

thingiverse

free

Flexible coupling for Anycubic i3 mega z-axis by tierradenadie

... the z-axis. the coupler has a side with a 8 mm bore and a 5 mm bore. i think, it might also be useful for other printer models.

thingiverse

free

VORON Flex Bowden Extruder (M6 Coupler) by themakeproject

...e original thing here: http://www.thingiverse.com/thing:1413699 and you can buy the m6 ptfe couplers here - http://bit.ly/2pempnc

thingiverse

free

Bowden tube to PC4-M10 coupler v0.41 by leaftye

...at 0.10mm. optional: putting oil or grease on the threads of the coupler will help with getting the nut...

thingiverse

free

MP Select Mini Z-Axis Tapered Coupler by noen

...z-axis motor shaft and threaded rod. i added internal threads to the coupler and had to mix together the...

thingiverse

free

MakerFarm Prusa i3v Z Axis Couplers by DragKota

...the time, and didn't know how to model in threads sorry for taking so long to add threads. also...

thingiverse

free

Coupler 10mm by AzzzTech

...ztech thingiverse simple coupling to couple a 10mm threaded rod to a nema17 stepper motor. needs 4x m3 screws and 2x m5 screws.

thingiverse

free

AEAT 6010/12 Sensor Mount by paulg100

...included for modification where needed. ideally m2 nuts required for sensor mount also needed some m10 threaded rod and m10 nuts.

thingiverse

free

Dragon Hotend - M10 PTFE Coupler Version by illuminerdi

...tain parts. as this is a hotend mount you should just plan on printing it with a very high infill for structural rigidity anyway.

thingiverse

free

Geeetech M & T Series Bowden Coupler by pmf68

...so there was no need to print a thread incorporating the 2 internal extruder parts, i have updated the design to make it stronger

thingiverse

free

Coupler 5mm to 8mm by phillipMr

... the coupler with a 3.5mm spacing, you surely can fit a m3 screw with a m3 nut on the other side. hope you like it, works for me!

thingiverse

free

5mm/8mm coupler by toxnico

...coupler to be customizable through thingiverse's customizer. it's available here: http://www.thingiverse.com/thing:299663

thingiverse

free

Coupling Saver for Lowrider2 CNC by anttix

... screws on the lower side to compress the coupler slightly for easier installation. visit this forum thread for more information.

thingiverse

free

Anet A8 Extruder Top Block by hitvan

...n thingiverse extruder top block to use with original a8 screw. added 5mm thread to add pneumatic coupler for the filament side

thingiverse

free

fishing rod handle by R87Mavric

...iverse the two holders for the fishing rod fit inside a pvc coupler. a threaded bolt (1/2") holds the main shaft together.

thingiverse

free

Kardan, Flex Joint, Coupler BiBONE by dvjcodec

...hingiverse flex joint dedicated to my printer bibone.http://www.thingiverse.com/thing:21178 motor shaft - 5mm threaded rod - m10

thingiverse

free

82mm Piston Wrist Pin Puller Adaptor by jmasterfunk

...quot; hose coupler, some nuts and washers to create a piston puller. this gives the coupler a better base to rest on the piston.

thingiverse

free

Ender-5 Direct Drive Filament Guide - M6 and M10 by Nighthawk1911

...for m10 and m6 bowden couplers because ender 5 kits contain an extra m6 bowden coupler and also to remove requirement for a nut.

thingiverse

free

Buko Z Coupler (v1) with Flex Chamber by deezmaker

...features a "flex chamber" to be a little flexible for the not-so-straight z threaded rods and one piece for both sides.

thingiverse

free

Selfcentering Z Coupler by bernbout

...i never could centre properly. however the 8mm top threads were too tall for my printer since i have...

thingiverse

free

Dahua Ceiling 2" Ceiling Mount by sorka

...ka thingiverse dahua ceiling mount for common 2" threaded coupler. in this case i'm using it for a sd59225u-hni camera.

thingiverse

free

Flexible Shaft Coupler by woodencase01

...a two parts coupler. when i tightened it, the threads of the z axis gripped more in one of...

thingiverse

free

Eggfinder TX 54mm nose mount by legendontour

...rp-sma mount as per cris' suggestion. strain relief cutout for zip tie cutout in base for m6 threaded eye nut and m6 locknut

thingiverse

free

Parametric Z Axis Coupler for 5mm to 8mm (M4 Bolts and Nuts) by Milogom

...to make one with m4 bolts and nuts. for me is perfectly stable, bolts suits perfectly even without nuts (use m4x12 bolts). enjoy.

thingiverse

free

PTFE M10 Wall Mount

...now prevents the ptfe tubing from "moving" up when pulled. also, the fusion 360 files are here: https://a360.co/2swdait

thingiverse

free

90 Degree Garden Hose Adapter by mausolfb

...a 90 degree adapter for use with garden hose threads there are three variants: standard low-profile the female coupler...

thingiverse

free

Embedded Bowden Coupling by 3dprintaddict

...of 5mm and the thread is 1/8 bspt 28 threads per...

thingiverse

free

Phone tripod mount (remixed) by seejayjay

...a through hole and bolt on the inside. the threads must be really long, but. you can put a...

thingiverse

free

Talon Claw U Magwell Rail Riser by Vavoom

...d picture). one nut in the magwell front will be all you need to hold the railgasm couplers and this magwell rail riser in place.

thingiverse

free

Wilton Cake Icing Tool Coupler Nuts by thatguykeek

...break on your icing tool. these take pretty fine threads so i am recommending a resolution of .12mm and...

thingiverse

free

Bowden extruder for Mk8 hobbed drive gear by laughingman

...ed and nut catch was added. update bowden coupler hole enlarged more for ease of use. update added a second one that is threaded.

thingiverse

free

Taz Z Motor coupler by jwest007

...hing 117950 by 1013 (http://www.thingiverse.com/thing:117950/#files). until now his motor to m6 connector was the best option.

thingiverse

free

z coupler 5x8 modified by meremale

... the whole thickness of the part... fingers-crossed it's a slight improvement (working well with no signs of failure so far).

thingiverse

free

Caliburn/TalonClaw Beefy Milan Coupler by Sillybutts

...se contact me for licensing. i can be reached on discord (sillybutts#5905), reddit (u/sillythegamer), or by thingiverse comments.

thingiverse

free

Prusa MMU2S Rear PTFE Coupler by guelz

...without the "fancy" inserts!) instead i've modeled the m5 threads directly in to...

thingiverse

free

Couplers for Z motors by Piper3D

...3d printers and other 3d printers. 3 sizes for m8 thread, 5/16, and 3/8th. fusion files are included. https://piper3dprinters.com

thingiverse

free

x55/x56 Replacement Joystick Coupler

...hopefully this will work to replace my broken joystick. threads snapped while in use. 10/2/19 2nd version: tightened up...

thingiverse

free

Haribo 3030 X-axis with belt tensioner and cutouts for couplers by trepstrer

... shorting bearing holders on x-axis to acomodate couplers. max coupler diameter is 25mm. the source files are available on github

thingiverse

free

Oldham Coupler by hahnpv

...thout pull-through issues. this was sized to fit ~ 12mm m3 screw. if lacking hot melts, enlarge the slots to fit regular m3 nuts.

thingiverse

free

PC4-M6 bowden coupler for drybox by bfrigon

...each time. i provided both models with and without threads if you want to tap the threads yourself. i...

thingiverse

free

PC4-M5 Bowden Coupler (FLSUN Extruder) by phantasmnz

...k for me - and is certainly a good emergency part whilst waiting for a brass coupler. thanks to krtektm for the original design.

thingiverse

free

Self-centering tapered-thread Z-axis coupling 5-8 with 13mm nut by Plastolist

... by plastolist thingiverse coupler 5 to 8 mm i add a 13mm nut in the center. so it is possible to thighten each side separately.

thingiverse

free

Bottle Cap Co2 adapter by xythobuz

...& caps for diy projects (cc-by) and the openscad threads this thing has been designed for use with my...

thingiverse

free

Prusa / Printrbot generic z axis coupler by LXDickman

...er and fill with silicone if backlash is an issue for you. now with new version 3 that has two setscrews, version 4 is two parts

thingiverse

free

Telescope Worm Drive by mcdewey

...end needs to be tapped since it has no threads (my modeling skills are up to making threads yet)....

thingiverse

free

XYZ Da Vinci 3in1 filament path by michalko99

... tube is shortest possible to avoid excessive resistance in motion. printed from petg carbon20 with 5 perimeters and 50% infill

thingiverse

free

28BYJ-48 Stepper Shaft - z-axis Coupler by Solarmax

...herry-60-3d-printer/ by vulcaman. however, they could be used for other printers using the 28byj-48 stepper and 5mm threaded rod.

thingiverse

free

Martins Effector Upgraded for E3D V6 - Bowden Retainer Option

...as no way to thread the bowden coupler, so had to redesign the hot end mount to accommodate the bowden coupling above the hot-end

thingiverse

free

Palette 2 Hemera Clip and Run Out Detection by Kosojo

...inal file uses an m6 sized thread bowden tube coupler. i have added a modified version for an m5 sized thread bowden tube coupler

thingiverse

free

CR-10 Z-Axis Stepper Spacer by MasterFX

...pler like me. update: i added an 1.5mm and 2mm spacer too. for me 1mm was perfect. since it is a very fast print just try it out!

thingiverse

free

Another Yet Upgrade "Prusa i3 Rework" to M8 Z-axis by rolller

...2x x_motor_idler_v3_top_nut_spring from prusa i3 z axis on m8 threads ...

thingiverse

free

9g Servo arms, different couplers to 5mm threaded rod WIP by Schorhr

... servo topper coupling, which will sit ontop of the four-arm and does not require aditional screws (perhaps a longer one though!)

thingiverse

free

Filament Guide for aluminum extrusion by jsummers06

...op rail of my printer. requires: an m7 threaded pneumatic coupler (bowden tube coupler) and 2 each m4 caphead screws and t-nuts.

thingiverse

free

Self-centering tapered-thread Z-axis coupling 8/5 mm

... sense on a motor shaft which doesn't have a flat portion for a grub screw, which unfortunately a lot of stepper motors have.

thingiverse

free

Reverse bowden for 2020 or 2040 aluminum extrusions for M10 coupler for use with a direct drive extruder.

...this is designed for a bowden connector with m10 threads mirror the part if you want to install it...

thingiverse

free

Print Rite Z Threaded Rod Wobble Fix by dcclark

...hopefully it will help. i have also changed the couplers to flexible ones. maybe you have to rescale it, depends on your material

thingiverse

free

SnakeyWakey CTC i3 Z-Axis Linkage by badgerchap

...rod (top piece). the two parts of the linkage are supposed to be connected by threading an m2 bolt through the hole in the tines.

thingiverse

free

P3steel 2.x - Z-axis top bearing by toolson

...dates: 12.12.2015 - improved v2 with removable support structure now available please share your makes! http://scheuten.me/?p=472

thingiverse

free

MPCNC(IE/US) - Rigid Coupler ///outdated by Martin_S

...threaded. i used a short screw to make the threads it's not symmetrical. the marks within the model indicates...

thingiverse

free

Bowden Adapter/Coupler - 4 Sizes by VanBot112

...om e3d, that works in combination with the black clip. the rest are just made to adapt to different threaded push-fit connectors.

thingiverse

free

Anet A8 coupler Anti Z wobble guide by DROUGA

...m/watch?v=3mlyqsuwtae i can recommend this thing to stabilize the top of the lead screw:https://www.thingiverse.com/thing:2436455

thingiverse

free

SPANNERHANDS Spool Holder fit for 2,6 Kg Spools from dasfilament.de by Grinch82

...mehr umbauarbeiten erforderten spool core, ptfe coupler und 608 bearing mount. der ptfe coupler ist für ein m5 gewinde entworfen.

thingiverse

free

coupler M8/5mm z-axis mpcnc by chriswal

...d print and the alignment. it solves only the problem if you need to push against the table with force (drag knife / drag roller)

thingiverse

free

Flexible Shaft Coupler with Torsion Bar by Davros66

...unction. updated - 2017-nov-07 - wall thickness increased. torsion bar widened. parametric design improved. files updated. enjoy.

thingiverse

free

Chiron Filament Guide Updated by frozenbanana97

...d as the stl lays the part down. it is fastened to the runout sensor using the two holes already in it using: 2x m3x20 2x m3 nuts

thingiverse

free

Prusa MK3 reverse bowden for LACK enclosure by Joey_3D

...e you need to the model. i used pushtrough couplers that let the teflon tube extend into the extruder like the original part did.

thingiverse

free

MP Select Mini Threaded Rod De-Wobbler Coupling by USWaterRockets

...y project log: https://hackaday.io/project/14823-monoprice-select-mini-maximum-3d-printer-mods/log/51880-dont-go-wobbly-on-me-now