thingiverse

free

Remix of Rocket No supports by KySyth

...remix of rocket no supports by kysyth thingiverse remix of rocket no supports

thingiverse

free

The Helm of Glencairn No Supports Remix

... this is a remix of the helm of glencairn by 4mule8 i took out the supports, to make the model print better for resin printers.

thingiverse

free

Roller remix- no supports

...upports thingiverse no supports needed due to blind hole being tapered. light sanding on button should provide for a press fit.

thingiverse

free

no Support Battleship remix by KySyth

...no support battleship remix by kysyth thingiverse battleship

thingiverse

free

Remixed Mask Support by HexAddict

...hout supports and you can use elastic band that you buy for sewing. also increased the space in the roller for thicker materials.

thingiverse

free

Remix kobayashi fidget cube with supports by gustofusion

...remix kobayashi fidget cube with supports by gustofusion thingiverse a remix with supports of the kobayashi fidget cube

thingiverse

free

Plinth 01 Remix - No supports by SquattingChicken

...plinth 01 remix - no supports by squattingchicken thingiverse modified to not require supports.

thingiverse

free

MSI GPU Support Remix by ShadowHunter94

... is wider. i also split the support from the stand so that supports are not required, and the support can be printed laying flat.

thingiverse

free

Self watering device non-support remix by lalka

...self watering device non-support remix by lalka thingiverse non support remix

thingiverse

free

Dachshund--Remixed with Supports by ErinMakesStuff

...ily. i used a modifi3d heated knife to remove them, but i think an exact-o knife or wire snippers would work pretty well as well.

thingiverse

free

Ummagawd remix trunk axii - No supports needed

...o supports needed thingiverse ummagawd remix trunk axii with no supports required for printing. designed to fit a 17.13 antenna.

thingiverse

free

Colt 1911 Firearm With Support Remix by gustofusion

...rt and different placement for larger support. rev 4 has minimal support but is printable and is a great one for .1 layer height.

thingiverse

free

I3 Mega cover Remix (with support) by 3DLane

...an duct that came with the hotend, so i remixed the model a bit. this has inbuilt supports, no need to enable supports in slicer.

thingiverse

free

Worker Bot remix with support by BiOGoly

...-away supports for an easier and cleaner print. the original worker-bot can be found here:http://www.thingiverse.com/thing:619242

thingiverse

free

AT ST Remixed legs (No supports) by marksmoura

...) by marksmoura thingiverse star wars at st legs remix for easier print, check the comparison pictures reworked using fusion 360

thingiverse

free

Arduino UNO R3 support Remix by Viking_forge

...arduino uno r3 support remix by viking_forge thingiverse arduino uno r3 support, wall mount

thingiverse

free

REMIX - Headphone Stand and angle support - Remix No Logo by sfazzina

...2 you can extend the bottom and pit a pole across the 2 for hanging stuff. this is very strong and robust so there are many uses.

thingiverse

free

remix Support MKS FT by Jcc37

...upport mks ft by jcc37 thingiverse s'installe sur un profilé 3030 et permet une orientation différente du support original.

thingiverse

free

Cthulhu Idol Remix w/Internal Supports

...upport to kubold's magnificent cthulhu idol. i was having trouble printing the original near the 'wrists' of cthulhu.

thingiverse

free

Remixed Webcam Support by csembroski

...ere. i put a rib on the part to stiffen the vertical support. this partially reduces camera wobble induce by printer vibrations.

thingiverse

free

support stylo remix to pen holder by M2orea

...support stylo remix to pen holder by m2orea thingiverse pen older remix to pen holder version big pen thank to jacob byrnes

thingiverse

free

Ummagawd Remix - Buzzer support by CptZeroG

... support have a clearance to permit the "sound" to exit but at the same time protect the buzzer hole from the dust/dirt

thingiverse

free

Drilling Guide with less guidance and material. Remix for less support

...rse a remix of https://www.thingiverse.com/thing:3027259 that makes it easy to print with less support and remove support easier

thingiverse

free

Rearing ponicorn remix with support by SandraK82

...om the cute little ponycorn for printing on kossel mini. 230°c abs, 0.15mm height, 10mm brim done with meshmixer and 123d design.

thingiverse

free

PlayStation Eye filter support - Remix by PiXas

...erial. my remix is splittet in two pieces, so you can easy print it and snap it together. mayby you put some drops of glue on it.

thingiverse

free

Anet A8 Motor support (remix by Paiti) by Paiti

...i guys, i remix support for motor z to anet a8. orginal version: thing:2010468 i add stamp "anet a8" to left support.

thingiverse

free

MK3 LCD Support Remix by ieatacid

...supports so the lcd assembly can be mounted without putting holes in the lack table for clearance of the ribbon cable connectors.

thingiverse

free

Remixed Command Strip Shelf with Support Rib by jspiro

...elf to add a support rib. huge difference in strength if you use it regularly to hold objects like phones and bluetooth speakers.

thingiverse

free

support bobine cr-10 remix by Cyborgdaron

...erse remix du support de bobines de greg191134 avec des roulements 623-zz 3x10x4 4 vis m3 l 25 mm + 8 ecrou 16 roulements 623-zz

thingiverse

free

[not need support remix] Wanhao i3 Hand Filament Guide by johnnypsycho

...[not need support remix] wanhao i3 hand filament guide by johnnypsycho thingiverse hand filament guide remix no support version

thingiverse

free

"The Mandalorian Support Free Remix Pose 3" WITH SUPPORTS FOR RESIN PRINTERS by generalrose

... mando here for tabletop rpg scale (roughly 32mm (in scale with artisan's guild stuff) and added supports for resin printing.

thingiverse

free

Flite Test Logo Remix Without Support by Ghostbomb

...flite test logo remix without support by ghostbomb thingiverse edited the model to be able to print without supports.

thingiverse

free

Anet A8 cooling+sensor support remix by ryks

... support remix by ryks thingiverse this is a remix adding sensor calibration credit to http://www.thingiverse.com/thing:1244751

thingiverse

free

Black Lantern Ring Remix-No Support by south2012

...culty getting it to print. i remixed it by removing the support in blender and making it a little bit more print friendly! enjoy!

thingiverse

free

Ender 3 EZ Vent Remix Remix Fully Supported Stock Blower Duct by jendenuvaden

...h extra support by techtomics june 09, 2019" extra reinforcement corrugations mean this one won't snap off as it prints!

thingiverse

free

remix of Z carriage, shorter bed support for 310x310 bed by tongphan93

...arriage, shorter bed support for 310x310 bed by tongphan93 thingiverse remix of z carriages, shorter bed support for 310x310 bed

thingiverse

free

The Mandalorian Support Free Remix of a Remix by Expulsive

...ry less printing. thanks! (just to be clear i don't own the mk3s. i own průša mini but this page doesn't know it exists.)

thingiverse

free

Bluer filament guide and support limit switch-Remix by kakarotojmsc

...filament guide for wo trees bluer, added support for hotend cables. this is a remix of: https://www.thingiverse.com/thing:4592607

thingiverse

free

Stargate city of Atlantis (water/no-support remix) by _Ron9083_

...bottom to print without supports and i also included a version with the city in water (the water is actually the stargate puddle)

thingiverse

free

6-Hole No-Support Remix

...eason for doing this was to make it easier to coat the interior with polyurethane in an attempt to make it a little more hygenic.

thingiverse

free

CR10 - Raspberry Pi camera support (REMIX) by mad4x4

...era support (remix) by mad4x4 thingiverse remixed to allow the bed to move all the way back, orginal design used to hit the bed.

thingiverse

free

Walther PPK with supports remix by WarHawk8080

...rors on meshmixer supports...ran thru netfabb...problems should are repaired see my beretta 92f model remix with supports as well

thingiverse

free

Chiron ultimate extruder Module Support Remix

...ickly added extra support for the wiring harness for this crazy good mod by xtremepower https://www.thingiverse.com/thing:3842566

thingiverse

free

Chain keeper remix (built in supports) by mhache

...all of the "roof". built in 0.2mm air gap at top and bottom of support section. preview in slicer, it will make sense.

thingiverse

free

Pikachu! remix fixed with support by raymnli

... programs will add the support automatically. also, fixed the orientation and scale so it will fit into a 200x200x180 print bed.

thingiverse

free

Beretta 92F with support remix by WarHawk8080

...18 found some issues in support...ran thru meshmixer...issues have been repaired see my walther ppk with supports remix model too

thingiverse

free

remix support motor y m10 by mariors50

...remix support motor y m10 by mariors50 thingiverse soporte para bajar motor y con agujeros para m10

thingiverse

free

Creality CR-6 SE Cable Support Remix by Lope26

...creality cr-6 se cable support remix by lope26 thingiverse creality cr-6 se cable support

thingiverse

free

Men of Valor skirmish ship proxy remix/ supports

...39;s men of valor skirmish ship proxy. i added supports so you don't have 29 slit the model and can print it with one print.

thingiverse

free

ANET A8 Titan support right side (REMIX) by rcaridade

...emix) by rcaridade thingiverse this is a remix of https://www.thingiverse.com/thing:2738365, i needed it in a diferent position.

thingiverse

free

Another Dice Tower - Stairs Remix - No Supports by aesthetica

... thingiverse very small change to the bottom of the stairs, at the hand rail to prevent an overhang that would require supports.

thingiverse

free

Spool Support Prusa 2020 i3 Remix by terribly

...e bushings and just used the 8mm (or 5/16") threaded rod. also redesigned to only require 1 t-nut per side (rather than two)

thingiverse

free

GOPRO SESSION 30° FPV MOUNT for TPU No support (remix) by Zak26

...thingiverse i remixed this model with integrated support for the go pro window. just needed to be removed/cut after printing it.

thingiverse

free

Remix: Mega Zero Front Toolbox (no support needed) by foureight84

...es can be joined using super glue. shaves a few hours off print time and almost half the filament cost without requiring support.

thingiverse

free

390mm tall Mandalorian "Support Free" Remix by NAK3DDesigns

...ndalorian to better help with bed adhesion.. it will print without supports but i highly recommend using supports under the cape.

thingiverse

free

Apollo Astronaut Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Little Ball jointed Girl by 7Fish (REMIX NO SUPPORT FILES)

... other files from its original location, the ones with no support added are all right from start, so i did not include them here.

thingiverse

free

remix center key avec support de cables by jofamilly13

...remix center key avec support de cables by jofamilly13 thingiverse rajout d'un support pour les cables

thingiverse

free

Iron Man Statue (With "Easy-to-remove" Support) - multimaterial remix by jkavalik

... jkavalik thingiverse multimaterial remix. update: added photos when printed changed one part of support from overhang to bridge

thingiverse

free

Amphisbaena Support Free Remix by iczfirz

...fw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c slice setting: 0.2mm layer 0.4mm nozzle 2 perimeter 150mm height

thingiverse

free

Tablet Stand Remix (Table Clamp Support) by lor_lucignano

...tablet stand remix (table clamp support) by lor_lucignano thingiverse as for the original version, the stl must be scaled x10

thingiverse

free

Webcam support for Ender3/Pro/V2 Remix by leandrooricchio

...r webcams with a 10 mm spherical jointfor octoprint: you should rotate the camera horizontally and vertically on webcam settings.

thingiverse

free

Remix Filament Spool Holder With Mendel support by eae01751

... sales. the frame slots and supports are wider so that the supports so that they can be moved to support wider or thinner spools.

thingiverse

free

Ender 3 Pro Umbilical Support Remix by buck1793

...ender 3 pro umbilical support remix by buck1793 thingiverse added a clip to hold the bowden tube in place as well

thingiverse

free

19mm wall supported dice set remix by arcaneoctopuslab

...ructure smaller to save resin and printing time. i printed these on a photon zero which has a low resolution for a resin printer.

thingiverse

free

No supports required - Remix - 4020 Extrusion holder by USG

...ing on 2020 or 4020 extrusion. bom a machine screw m6x50, washer and a self-locking nut. two m5x10 machine screws with slot nuts.

thingiverse

free

Endstop Z Support prusa i3, remix for Sintron kit by ypsimon

...rusa i3, remix for sintron kit by ypsimon thingiverse a little remix of an existing project, tested with sintron prusa endstop.

thingiverse

free

Drag Chain end support for ender 3 - REMIX for EZR extruder by MERVIN______

... this is a remix of drag chain - cable chain - ender 3 by diogosantos88 part: support 2https://www.thingiverse.com/thing:3715002

thingiverse

free

Remix David by Michelangelo with only one support by zhwang168

...it to 25 % of the original size so it is only 100 mm in height. a mini david. hope you will like it. https://youtu.be/xyjwout67_o

thingiverse

free

Gargoyle Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Concept2 Rower Phone Holder Remix - No Supports by how_extrude

...thout any supports. uses candle9999's original clamp. printed in inland pla+ with 40% infill, 0.3 layer height, and 3 walls.

thingiverse

free

Ummagawd Remix - Tail antennas support by CptZeroG

...antenna tube holes have a diameter smaller than of the tube, this to prevent the trespassing of the antenna tube inside the kwad.

thingiverse

free

The Mandalorian Remix no support with Beskar Base for feet stability. by WhiterSniper518

... pro with feet sticking added beskar base using cura with hatchbox 1.75 filament , after additional astatic add printed flawless.

thingiverse

free

Caulk Tube Support Remix by Brcase

...ns as well. also created a revised version that can be printed on its side without supports so the pins are less likely to break.

thingiverse

free

Gunpla Sprue Desktop Organizer Remix (No Supports)

...ogo on the back so it shouldn't need supports but still retains the logo. test printed it on my ender 3 and it came out well.

thingiverse

free

Mandalorian Bust Support Free Remix by TheBarbarian13

...edule (not like that is a bad thing). no supports needed please follow me for more things like this any filament color will work

thingiverse

free

Colossus Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Daenerys Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Ritewing Mini Drak Vented Motor Mount -REMIX-NO SUPPORTS- by ECO9FPV

...g mini drak vented motor mount -remix-no supports- by eco9fpv thingiverse ritewing mini drak vented motor mount without supports

thingiverse

free

REMIX center key tête Z122 avec support chaine by moustache45

...remix center key tête z122 avec support chaine by moustache45 thingiverse center key pour tête z122 avec support chaine

thingiverse

free

Remixed Molecular Model Set - Built in Supports

... to improve bed adhesion. look at the original: molecular model set by betawolf for the cool "how to use" instructions

thingiverse

free

Batman with Cape Support Free Remix by iczfirz

...be to find out more support free 4k time-lapse video: youtube.com/watch?v=0m4enapzadk&list=pliilf_5yk3dpsmleyundxscji6okquxvo

thingiverse

free

Kingsong 16X LED support bracket REMIX by Ariehh

...an the original led support bracket. i added an even stronger support bracket without led support because i broke one in a crash.

thingiverse

free

Amazfit GTR Support Adapter [Remix] by drabisko

... of the stand. tags: huami amazfit gtr support adapter smartwatch smart watch docking charging cable station holder support stand

thingiverse

free

Snowball Maker, no Support REMIX by activezombie

...d have been one part, printed on it's back, but the printed layers would be in a weaker position than if printed on its side.

thingiverse

free

Buck Converter Snap-fit enclosure LM2596 - no supports remix by muddyfeet

...s: 5 these settings print a solid part with pla. the small overhangs on the clips print fine and it snaps together well.

thingiverse

free

Printrbot Simple 1405 Fan Duct Remix - with supports by 3Dlirious

...r me without any additional supports, and when i pried it off the bed it came off clean with the supports still stuck to the bed!

thingiverse

free

Remixed holder for wireless Samsung S6 Charger (Without support) by Gertsen

...6 charger (without support) by gertsen thingiverse removed supports, but still able to hold a spigon protective case 10mm thick.

thingiverse

free

Street Fighter Sagat (Support Free Remix) by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

iPad modular support for DJI Mavic Pro remote - remix by jostro

...any tablet. even without tightening the support structure with sandows, it seems impossible to slide the ipad out of the support.

thingiverse

free

Olaf (Easy print no support) MMU remix by FlamenG

...meng thingiverse this model deserves to be printed in color. so i split it into parts for printing with an mmu upgraded printer.

thingiverse

free

MakerFarm i3v Anti Z Wobble & Backlash Mount Remix - No Supports by DustinWoods

...#39;t have to. this remix is designed so you don't need supports to print it. haven't printed it yet, but i will shortly.

thingiverse

free

Wicked Marvel Avengers Captain America Support Free Remix by iczfirz

...ction to 3d printing? watch these time-lapse!https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Small spool support (5 Dollar Filament) 29mm remix by venzon

...remix by venzon thingiverse i remixed this filament holder to have a 29mm hole so it fits on my homemade pvc-based spool holder.

thingiverse

free

Among us dead body Remix (No Support) by Sengrath

...n be achieved with scaling one of the parts (see printer settings) maybe i will find a better solution these days.... ;) greeting

thingiverse

free

Artillery Sidewinder x1 - Gantry Support Remix Mounting.top Remix by keita99

...inal shape made the gantry tilt forward when tightened. added reinforcement to make up for the hole. please mirror the other one.

thingiverse

free

Remixed VW Bus body with built in supports by Hostile17

... great care should be taken when removing the supports. get the other parts of the model from the original post by chaoscoretech.

thingiverse

free

REMIX No Support Bobbin End for Ashford Traditional/Traveler by Chrisnewman by Beckyinma

...wman. i've printed this three times without issue on an ender 3pro and it fits very well with the other existing parts. :)

thingiverse

free

Remix/Remix - Supports plateau sans contraintes & optimisation course Y + passage de collier plastique by AlfiQue

...z122https://www.thingiverse.com/thing:1854220 permet l'ajout et le maintien des roulements par des collier plastique (rilsan)

thingiverse

free

BTT TFT35-E3 V3.0 Case with extra support remixed by pietrek_

...btt tft35-e3 v3.0 case with extra support remixed by pietrek_ thingiverse just removed the exp3 and rs232 caps.

thingiverse

free

Whoop / F36 / H36 - Case middle remix for frame support by XXXMan

...hing. i included only the middle part, you can download other parts from original thing.https://www.thingiverse.com/thing:2795264

thingiverse

free

v10 covid-19 NanoHack no support remix by nireic

...nted it with no issues at 0.3mm in under 4 hours. only solid-rim version. for big faces in general. https://www.nilsreichhard.com

thingiverse

free

Ender 5+ Bed Cable Support (remix) by bordensize

...p with my bed support, but i preferred the original design over the numerous others due not not being nearly as bulky or visible.

thingiverse

free

ANET A8 Z Support remix by mstrmold

... were too thin on my robo3d and broke easily, so i added a 1mm reinforced structure to make it easier to print. super sturdy now.

thingiverse

free

Benny Face Eyes Remix (no supports needed)

... supports. the parts will need to be rotated for printing (rotate 90 degrees to put the flat side down to the bed) - see the pic.

thingiverse

free

The Joyful Yel Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Remix of Air propelled Car axles (not requiring support) by HellBoy_II

...e to print it without support but only with the use of a brim raft (much easier to remove). note : use a brim raft (see pictures)

thingiverse

free

No Support Remix of WedgeSD's Improved Anet A8 RepRap X-Axis Belt Tensioner by Anthonyseo

... by anthonyseo thingiverse improved anet a8 reprap x-axis belt tensioner by wedgesd remix that can be printed without supports.

thingiverse

free

Batman with Cape Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Captain America and Marvel Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Spiderman Home Coming Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Iron Throne Support Free Remix by iczfirz

...u.be/rlnsv9cktnuhttps://youtu.be/9w7k7xrm34q https://youtu.be/uxlfw1a8ttahttps://youtu.be/f1pj7acaz70https://youtu.be/tbohfjlpp0c

thingiverse

free

Hulk Ring (REMIX), for DLP, Pre-supported. by nauseum

... you, let me know so i can tag you in the remix. i sliced and diced it in 3dcoat to make a ring, i will not use it commercially.

thingiverse

free

Henry Viii Crown - Remix with Custom supports by lordthorpe

... the crown lifts straight off the supports after printing - i used a raft to ensure that the crown and the supports did not move!

thingiverse

free

Creality CR-6 SE Cable AND PTFE Support (Remix) by Sparkss

...rt for the tube before it enters into the hot end. i have had it running for a couple of weeks now and it is working as expected.

thingiverse

free

Pen Butler | Pencil Holder | Remix NO Support | Split in 3 Parts by BoBurner

...orts. no problems with stringing and you can combine different materials. you have to glue the 3 parts with fast glue. much fun !

thingiverse

free

CR-6 SE Cable Support remixed by artworkvideo

... off. i use these mods as well: thingiverse 4682557....ptfe tube support thingiverse 4698688...x-axis cover/bracket...first rate!

thingiverse

free

Spinning Balancing Bird Remix Without Attached Supports

...ree stand to go with it: https://www.thingiverse.com/make:710887 more of my models on cults:https://cults3d.com/en/users/abbymath

thingiverse

free

Covid-19 NanoHack v2 Copper3D front air leak voronoi fix Remix for less support by Hellrazor978

...e a little less material requires no support on the sides but will require post processing still needs some support on the bottom

thingiverse

free

SunluS8 King Direct Driver dirty Remix with EndFilament Sensor support by fabry_68

... in petg. you can find both the single sensor support and the already joined parts ready to print. please report me any problem.