thingiverse

free

9 volt battery spacer by jesse

...acer by jesse thingiverse a spacer for a kidde i9040 smoke detector. allows the detector to be hooked up to an ac power supply.

thingiverse

free

Bed spacer for Duplicator 9 by viceroy176

... replace the faulty standoffs on the first batch of wanhao d9 printers which either arrive broken or can break during adjustment.

thingiverse

free

Small spacer (group of 9) by dvanhoos

...mm spacer i quickly designed and printed for my father-in-law. openscad file also included so dimensions can be easily modified.

thingiverse

free

6 by 9 speaker spacer by robosteve

... about 2 inch's tall and around 1.5 inch's tall on the other side. its in a 5 degree angle, so the speakers can point up.

thingiverse

free

Duplicator 9 Foot Spacers

... to raise my d9 to allow for airflow through my new main board fan installation. easy, quick print. https://youtu.be/vnqit6xbzr0

thingiverse

free

7 Speed Cassette on 8/9/10 Freehub 4.5 mm Spacer by aiber

...is a 4.5 mm spacer for mounting 7 speed cassettes on 8/9/10 speed freehubs. http://www.jensonusa.com/cassette-spacer very simple.

thingiverse

free

Deck Spacer 8/9/10/11 mm by PrintCipal

...deck spacer 8/9/10/11 mm by printcipal thingiverse 8mm, 9mm, 10mm, 11mm

thingiverse

free

9 Speed SRAM Cassette Spacer (2.54 mm) by aiber

...9 speed sram cassette spacer (2.54 mm) by aiber thingiverse see http://www.thingiverse.com/thing:2064758

thingiverse

free

9 Speed Shimano Cassette Spacer (2.56 mm) by aiber

...9 speed shimano cassette spacer (2.56 mm) by aiber thingiverse see http://www.thingiverse.com/thing:2064758

thingiverse

free

8/9/10 Speed Cassette on 11 Speed Freehub Spacer by aiber

... mounting 8/9/10 speed cassettes on an 11 speed freehub body. stuff from here may apply: http://www.thingiverse.com/thing:2064758

thingiverse

free

High misalignment spacers for 1.25" rod end, 9/16" bolt, 2.630" mount width by VanDii

...le only has one spacer, you'll need to print two for a full stack, four for a pair of heims, and 16 for a full 4 link system.

thingiverse

free

Abus Lock Bar Spacer by Joghurt

...ones weren't high enough for my purpose. height is 9 ...

thingiverse

free

CTC Z Axis Stopswitch Spacer by ToolBoxPT

...axis various sizes (3, 4, 5, 6, 7, 8, 9 and 10 mm) ideal to use with glass...

thingiverse

free

Singlespeed Spacer Kit by T70E

...15mm widths) wave spacer design. (5, 6, 7, 8, 9 10 and 15mm...

thingiverse

free

6x9 Speaker Spacer by jonbourg

...eful! the openscad file is also included to customize this for your needs (for example; adding external adapter mount points).

thingiverse

free

MQC One Lower Plate Skirt by BrianMatthew

...on the thruster bar or it will melt the spacer ...

thingiverse

free

Pegboard Mount – Spacer & Washer by flyattack

...seems like it was born for 3d printing – doesn9t it? custom mounts for...

thingiverse

free

BLtouch bracket for titan aero by Tandoor_tentative

...thingiverse bracket with additional notch for cable. use the spacer to adjust the position of the probe my setting:...

thingiverse

free

Octagonal barrel for Nerf Blasters by JohnMorog

...228.6mm long 10x15 mm sights. 15.95 diameter inner barrel spacer for 9/16 brass tubing if...

thingiverse

free

Blum hinge spacer

...slicer. if you want more - slightly increase z-scale. i9ve made the thing from pet-g and it fitted tightly....

thingiverse

free

SpoolHolder universal - 3Dator addon

...- 3dator addon thingiverse you will need 8x the spacer and 9 608zz rollerskaterbearings if you need this as...

thingiverse

free

Joseph and Joseph Rolling Pin Spacers

...joseph rolling pin spacers thingiverse 7, 7.5, 8 and 9 mm spacers for all of those who have this...

thingiverse

free

Ender Belt Spacers by The_Fresh_Prints_of_Denver

...all belts are created equal so if this size doesn9t fit adjust z height accordingly. remember to turn off...

thingiverse

free

AF Sportsman Barrel Spacer by AgentOak

...adventure force sportsman's barrel that has been modded with 916 brass. with this plug in place the brass will...

thingiverse

free

QXZ Bowden Extruder by scottyorr

...the thumb-screw.) 9-1-15: modified thumb-screw adjuster. 9-3-15: added tabbed spacer with m5 mounting holes. 9-15-15: added printed barrel w/nut...

thingiverse

free

Seeding Spacer by chevybad4u

...the following spacings: 1 per ft^2 4 per ft^2 9 per ft^2 12 per...

thingiverse

free

shimano 7->8 cassette spacer by gregor_p

...than 3 mm) to mount 7-speed cassette on a 8/9 speed hub, none of the models found on thingiverse...

thingiverse

free

Harbor Freight Punch and Die Spacer

...provide the clearance needed to use the punch cards i9ve designed for us quarters for making coin rings. us...

thingiverse

free

iPad large tablet stand by rochertian

...large tablet that has a cover on it. the spacer press into the legs, it is a tight fit....

thingiverse

free

Grape crusher by Shish_57

...stainless steel bolt m4x16 - 9 pieces stainless steel spacer m4 - 9 pieces screw m2x10 - 2 pieces...

thingiverse

free

Spacer key gap measurement tool by Gurns

...in cars, in construction, etc. settings for 5, 7, 9 and 11mm space...

thingiverse

free

X Carriage E3D V6 Tevo Tarantula with Bltouch spacer by Svalentine89

...ock extruder and this design gives the carriage much more rigidity. update2 (1/9/18): made the spacer for the bltouch 2mm shorter

thingiverse

free

V2 V4 V6 1200m Bluetooth Intercom Clamp Spacer by Turpinator

...memory... m4s? ive been using this for the past ~9 months, both in the summer on the motorcycle and...

thingiverse

free

Outlet covers and spacers by mverive

...gfci outlets and enlarged screw holes for gfci outlets 12-292019: added new versions for quad outlets 01-10-2021: added round...

thingiverse

free

UPDATED Makerslide Eccentric Spacer - Parametric by MichaelAtOz

...at http://www.makerslide.com/ it and my version is for 0.281" 932" 7.1mm hole with a m5 bolt. however you can...

thingiverse

free

FT-5 BLTOUCH MOUNT FOR VOLCANO HOTEND by tjnamtiw

...work. i haven't printed it. i just have 9mm spacer on the original one for...

thingiverse

free

Artist-D purge bucket by McDLT_ca

...printer. you will need to print 9 to 10 spacer. on mine, 5 where used on the right side...

thingiverse

free

SCX 140 CAM Mount for 23 mm standoff by claytonbakerjr

...runcam swift micro or foxeer micro. comes with 4mm spacer. need to use at least a 8 to 9...

thingiverse

free

K-9 Triple Switch Plate Cover by ICEPICKTONY

...work in progress as i am still making the spacer ring that will allow this to sit flush against...

thingiverse

free

MisteRdeck - LED Spacer by demolischen

...letters d -> k. solder the data to pin 9 ...

thingiverse

free

Replace your Roller Bearings with Bronze Bushings on your CTC printer by coberdas

...by coberdas thingiverse you can print out 16 half spacer or sleeves and order 8 new bronze bushings from...

thingiverse

free

Corner Block Lock v2 by PCFlyer

...a coupler with/or longer threaded rod would allow additional spacer to be used to allow more usable z...

thingiverse

free

Flash Light Bike Mount by TheTruth

...part. you might want to add a little rubber spacer between the bars and the part to keep it...

thingiverse

free

mask spacer by davesonfire43

...the two when wearing it. both versions weigh about 9 ...

thingiverse

free

Micro-Mesh Sanding Pad Holder by jjjp423

...a backer. i used 1/4 ply and left enough spacer to also glue the card identifying the grits next...

thingiverse

free

GST-9 Punch Alignment Guide by AlphaB01

...character between characters - so may update with a spacer or second guide that offsets each character by 1/2...

thingiverse

free

Silent Hamster Wheel by sirfragalot

...0.8mm nozzle. 20-30% infill on the main wheel and spacer, 100% infill on the...

thingiverse

free

Bl touch mount for Microswiss direct drive by Jhack82

...3.6 mm. also i have no need for a spacer on the stop, so i removed it. edit: i...

thingiverse

free

BW Cooling Fan Duct & Adapter for E0 spacer & BLTouch by SportSedan

...nov 9, 2016 (thank you) is here: http://www.thingiverse.com/thing:1880081 this 9spacer' also allows you to mount the bltouch directly behind...

thingiverse

free

Hard drive and SSD caddy for HP Z600 Z620 Z800 XW6600 XW8600 by glucz

...times as needed. use 30mm m3 screws inside the spacer. ...

thingiverse

free

Lightweight and stiff E3D Hemera installation on CR10s Pro with BLTouch by 3Dprinty

...pro. the hemera itself is mounted using three 5mm spacer with m3x12 screws and 3x0,5mm retaining washers directly under...

thingiverse

free

Prusa MK3S Extruder for Tevo Tornado/CR-10/Ender... by reczul01

...nut body cover mount 1x m3x14 screw for blower spacer mount 1x m3 square nut for blower spacer mount...

thingiverse

free

Hinge by Nemernemer

...1 wall-mount: 1 short finger: 6 long finger: 6 spacer 9 short spacer: 6 short finger - top: 1...

thingiverse

free

Jtech Flashforge Creator Pro mount by bcoover

...moved fan to use stock mounting bolts with a spacer (last version was still hitting top on large prints)...

thingiverse

free

X-Carve PCB Cam Clamp by chemist4higher

...screws. 9/29/16 - added 2 files to change the spacer to something that utilizes the mounting holes on the...

thingiverse

free

MPSM Fully Adjustable Z Spacer (MP Select Mini) by wileykyoto

...40 notches, every 4 notches are numbered .0 through .9 these represent decimal mm steps. each notch is a...

thingiverse

free

Holley 4150 style Carburetor spacer for casting by OfficialAceFrehley

...edits 3/9/18 - rev 1 - added additional draft 914/18 1st casting attempt, rough surface and porosity. will...

thingiverse

free

Rumba Fan holder for 25x25x10 mm fan by rchobby

...short cables. the assembly of the fan bracket via spacer with 3 mm holes and inner threads. it has...

thingiverse

free

Heavy Duty Herringbone Gears for M8 or 9/16 (14mm) Bolts by mar363636

...physically compatible with my extruder. even after tinkering with washers/spacer, i had x carriage clearance issues. so i made...

thingiverse

free

Brushless Whoop Mounting Kit for Rakon Heli Delrin Carbon 66mm by wil3

...fc clearance) 5) stack the fc 6) stack the spacerm2-4mm part 7) stack the vtx 8) secure with nut...

thingiverse

free

Glass Bed Z-Axis Spacer for CTC & Flashforge Printers by ItsProtonBob

...depot. simply cut the glass to size (6" by 9quot;), add the z-spacer, and clamp to your heated bed....

thingiverse

free

Dual top mounted spool holder by Xlemos

...this... it's designed for 52mm hole spools, the small spacer is for 750g spools (55mm max width) and the...

thingiverse

free

CR-10 V2, V3 Bondtech Adapter by gwarokk

...may want to get longer spacers (i used 30mm spacer), or avoid homing at that height. instructions- install the...

thingiverse

free

Evo SS Hero 9 Gimbal Mount by TrailFeatures

...weights to help balance the arm (i've included a spacer for the weight clamp: https://www.evogimbals.com/products/universal-gimbal-counterweight?_pos=6&_sid=09b9e5682&_ss=r the camera is at...

thingiverse

free

Coin Ring Coin Card - US Quarter - 1/2" Punch

...the proper clearance. harbor freight 9pc. punch and die spacerttps://www.thingiverse.com/thing:4155724 ...

thingiverse

free

Coin Ring Coin Card - US Quarter - 7/16" Punch

...the proper clearance. harbor freight 9pc. punch and die spacerttps://www.thingiverse.com/thing:4155724 ...

thingiverse

free

Kreg K4 Height Spacer to use with 2x4 Supports by andycc

...also included. parts list 4 x 1-1/8 #8 screws (https://www.homedepot.com/p/8-32-x-1-1-8-in-combo-truss-head-zinc-plated-machine-screw-8-pack-80489/204274706) 4 x #8 nylon lock nuts (https://www.homedepot.com/p/everbilt-8-32-stainless-steel-nylon-lock-nut-4-pack-800101/204274164) print time...

thingiverse

free

3D Printable Makerslide Actuator mount by planetdrock

...are stationary and just use 5mm washers. the eccentric spacer side uses 1 30mm m5 bolt and the other...

thingiverse

free

Shimano Flat Mount Bleeding Block

...shimano flat mount bleed block is a yellow plastic spacer that is specially shaped and has 9 holes. it...

thingiverse

free

Boxes tailored to fit Garage15.no Flex 9 cabinet by Ctech_83

...type b drawers. note: you will need to use spacer on each side (see attached image) to even out...

thingiverse

free

Gee Bee Faux Radial / motor Mount by Technidyne

...mount can be thought of as actually a printed spacer ...

thingiverse

free

DAILEY 16 by abadgoat

...when using nylon locking nuts. also, use the shock spacer on all 4 shocks for proper stance, and elimination...

thingiverse

free

Gearbox 256 / Getriebe 256 by CONSTRUCTeR

...bearing/lager 61901 zz (6x12x24mm) b - part/teil 21 - spacer handle bearing/scheibe grifflager c - part/teil 22 - handle/griff...

thingiverse

free

Gents Saw Handle Upgrade by bobm123

...for easy, no supports printing. the thin (.4 mm) spacer goes between them to compensate for the blade...

thingiverse

free

KTM Adventure 1190 (2013-2016) Windshield riser adapter by mkrmec

...no problem. m5x25mm screws plastic 3mm thick 12mm diameter washer/spacer for the windshield holes. raft used because petg likes...

thingiverse

free

Router Table Stock Guide by JXC

...m8x1.25 22mm screw : pack of 10 (6$) (optional spacer m8 washer : pack of 25 (7$) and, as...

thingiverse

free

Hammer Mini H Quad v3.0 - Converted to 3D by PaulHam

...the motor wires to pass and a spacer. armlighter.stl arm_lighter_spacerstl ...

thingiverse

free

Trinus leveling heatbed plate by zephel01

...4 spring 0.7 x 5 x 10 mm m3 spacer 10mm 2017.03.24 9:12 screw size fix. 2017.03.26 6:27 upper...

thingiverse

free

Garmin Striker/EchoMap Mount by Ruebarb

...top & bottom layers, 30% infill, supports yes base spacer 3 perimeters, 3 top & bottom layers, 30% infill,...

thingiverse

free

Carbon Tube Motor Mount by MikeyB

...the sketchup file for the motor mounts and the spacer. update 5/12/13: this project kinda fell to the back...

thingiverse

free

Ender 5 Hero Me Gen 5 no Y offset for BL Touch and OEM / Microswiss Hot End by Dimide

...of printing !). i then decided to remove the spacer everything fit fine with 5015 lightweight fan ducts on...

thingiverse

free

The Universal Kitchen Rack by wanhaofan1

...consists of three main components: spacers, dividers, pegs. the spacer length is varied (by scaling the spacer stl length)...

thingiverse

free

Makerslide 3D Printer by Shankman

...package dual bearing v-wheel kit 25203-04, 9 each eccentric spacer 25195-01, 4 each extrusion bracket (gusset)-26018-01 maker slide -...

thingiverse

free

DIY 3D Printed Camera Slider by 3Drcnc

...1 m5x25 bolt 4 v slot wheels 2 6mm spacer 2 6mm eccentric spacers for the camera mount and...

thingiverse

free

3 Position Switch by ClayTechnical

...or one close to this size (adjust the spring spacer model size if spring is to stiff) 5) super...

thingiverse

free

1/4" Drive Socket Holder by reavercon

...taller, just add a washer or z-scale up the spacer holds 8 1/4" drive sockets from 9/16- 3/8. not...

thingiverse

free

Anet E12 legs using current rubber feet or upgrade to squash ball feet by twhite0101

...and require the least cleanup. i have provided a spacer in case you need it, i found my hardware...

thingiverse

free

2006 subaru outback lift 2.5i 1 3/4"front 2" rear lift

...grade 8 bolts bolts and lock nuts some hex spacer i found at home depot they are about 1...

thingiverse

free

Tricopter v1.0 by aixelsyd

...it? the tail yaw mechanism uses a standard aluminum spacer from home depot and a bolt as the axle....

thingiverse

free

Parametric Z base printed clamp/spacer by triffid_hunter

...(minimum smooth_rod_diameter/2+threaded_rod_diameter/2) if you omit the bearing mount. updated 9 november uploaded new files with proper distances, preset to...

thingiverse

free

Modular Adapter For eSun Spools on CR-10/CR-10S by mce076

...will need to print 1 x nut, 2 x spacer and 1 x tube. a maximum of 9 x...

thingiverse

free

Screwdriver Wall Holder Bahco

...you a few sec to move them perfect. the spacer or the angler can be used to give distance...

thingiverse

free

Kite spooler by Molgan

...be safe. parts i used: 6pcs 20mm round aluminum standoffshttp://www.ebay.com/itm/10pcs-m3-x-20mm-round-aluminum-column-alloy-standoff-spacerstud-fastener-black-/122323551702?hash=item1c7b0d45d6:g:gmiaaoswrfvzop2~ 12pcs 3x10mm machine screwshttp://www.ebay.com/itm/m2-m2-5-m3-m4-high-tensile-10-9-socket-button-head-screws-black-self-colour-/222416302817?var=&hash=item33c90b72e1:m:mqelsheigqidbshgd58wfeq 10mm rod, i used a...

thingiverse

free

MeGaTroN Cooler Fanduct Tevo Tarantula w BLTouch Remix by MonroeZombie

...issue. if you printed the orginal use a 5mm spacer to correct the z-height of the sensor. offsets for...

thingiverse

free

Steampunk Rally Box Insert by reverman

...of them to fill out the box. the box spacer is also optional. figured fill the box out so...

thingiverse

free

DSLR GoPro Style Mount by dSASQUATCH707

...the screw was too long. therefore i created a spacer to allow you to print it out to and...

thingiverse

free

e3d v6 adapter for Monoprice Select Mini V1 by mverive

...for cooling extruded filament. updated 9/13/17 - created a spacer for 40mm fan to allow more air for the...

thingiverse

free

Robo 3D E3D Titan Modular Mount by danzca6

...want the v6 then there is a v6 top spacer (1mm bigger) and the bottom spacer. you can see...

thingiverse

free

70 mm Slew Bearing by ThinkSolutions

...(see picture). 9/25/18: i added .stls for 3.5 mm spacer disks that can be useful to leave a gap...

thingiverse

free

Traxxas Bandit MSE-6 Mouse Droid parts by gotbluemilk

...the front wheel after tightening so i made a spacer instead of taking the suspension apart and killing it...

thingiverse

free

Direct Drive for Ultimaker with Default Rods by ThomasKTN

...done: 1.) make my own version of a rod spacer 2.) make my own version of a direct drive...

thingiverse

free

Split Stand for Christmas Tree Advent Calendar by Nother_Ngineer

...width slightly for better fit. updated 10/14/20: added optional spacer to put on the pole above the pot, and...

thingiverse

free

MMDVM/PiHat Enclosure by jbelford

...the display if desired. i have also included two spacer to secure the mmdvm on the r-pi. the resulting...

thingiverse

free

(revised 9/2018) Cooler for FT-5 and 713maker.com Ultralight Aero extruder mount by bwaslo

...least with pet-g) file sources: the frame, backplate, and spacer are original designs done in fusion360 the "duct and...

thingiverse

free

Tekhenu organiser / insert by c_sharper

...sand down the boxes quite long and broke some spacer walls as well. no need to print at 101%...

thingiverse

free

Filament Holder for IKEA Stuva by Berlin_Engineer

...the spool. (http://geni.us/bm2iyyb)* for each roll, you need the spacer in the stl files. for the assembling i used...

thingiverse

free

ZMR 250 Tricopter V2 by bluem6

...green "dragonfly" is my first attempt with an unmodify spacer..comments welcome. parts used: used cobra 2204 1960kv used rotogeek...

thingiverse

free

Root2cnc 40x40mm by moose4621

...motion link 8mm spacer and y gantry bearing 8mm spacer. these are to move the pulleys out 8mm so...

thingiverse

free

Makerbot style Mendel RepStrap with Linear Bearings. by onelonedork

...just added the upright frame parts and build platform spacer. i designed this with 6 screw mounts on either...

thingiverse

free

TuneFast Harp by makefast

...just feed it through the small hole by the spacer if using a nylon string, tie a knot in...

thingiverse

free

Scalar - Dual Drive System for Scalar Heatbeds by 3DModularSystems

...625 bearings for v sheel version: 12 x 5x10mm spacer 6 v shaped wheels + 12 x 625 bearings...

thingiverse

free

Left Coast miniQuad by jimlee

...nylock nut. added 1/2 inch spacer. this is the spacer called out in the instructions for setting the depth...

thingiverse

free

Jeep Wrangler TJ and Cherokee Lift pucks by team140

...the plastic to deform! i've since bought a polyurethane spacer for the rears. the front pucks are holding up...

thingiverse

free

BTT-TFT35 V3.0 Case\Cover\Stand (Wanhao D9, CR10 etc) by Dragonvet

...longer screws work with washers or other types of spacer. the back of the case snaps on and in...

thingiverse

free

Belfort and Expansions Insert by Patella

...measuring, please, before printing.) i would recommend printing the spacer but i guess it's not strictly necessary. i printed...

thingiverse

free

Fidget spinner with 1/2 inch bearings by l_grochal

...added are untested snowflake grip caps. just added file "spacerquot; to help in centering balls in the short one...

thingiverse

free

Camera Slider (remix) by Muhalo

...(wheels accept 608 skate bearings) 11) added slider wheel spacer (instead of stacks of...

thingiverse

free

Pinch Wheel Extruder v1.1 by hoeken

...nut 9 x m3 washer 4 x 7/16" plastic spacer 1 x heater barrel assembly 1 x kysan 1156006...

thingiverse

free

Segmented Interlocking Well spacer for UARM-Pro Experimental Pathology Stainer / Deparaffinization Platform by siderits

...both mblock graphical programming and offline teach mode. dimensions: 12.49x4.996x1.0 cm deparaffinization procedure: https://www.youtube.com/watch?v=q_ls0qatzy0 uarm pro 4 axis robotic...

thingiverse

free

OmniStand Adjustable Filament Spool Stand by BaronWilliams

...spacer is used. this set includes 6 filament rod spacer. 77x24 mm (3.03x0.94") 77x29 mm (3.03x1.14") 77x34 mm (3.03x1.33")...