thingiverse

free

E3D print mount for tevo tornado by Papa-Smith

...e3d print mount for tevo tornado by papa-smith thingiverse mount for e3d 3 in 1 out print head

thingiverse

free

E3D Dual Printing by okrim

... 45° overhang new v5 "flat-version" after printing abort the little support with tongs (i´m don't using simplify3d)

thingiverse

free

E3D Holder for Milled-Printed-3D-Printer by hthuering

...ingiverse holder for bowden e3d. designed for the milled printed 3d printerhttps://www.thingiverse.com/thing:1524754 from allted

thingiverse

free

CR-X E3D V6 Print Head Mount by TeeemNZ

...cr-x e3d v6 print head mount by teeemnz thingiverse e3d v6 print head clone mount for cr-x using the stock fan housing.

thingiverse

free

Bondtech BMG + E3D V6 print head /w space for E3D coupler

...original did not leave space for it. i've also removed the logo from the side of the model. no other changes have been made.

thingiverse

free

Printing parts 40mm x 40mm Fan mount for E3D V6 by alextien

...printing parts 40mm x 40mm fan mount for e3d v6 by alextien thingiverse printing parts fan mount for e3d v6.

thingiverse

free

E3D V5 2 IN 1 FAN 30mm AND PRINT COOLING by Jcf_jackey

...rint cooling by jcf_jackey thingiverse e3d v5 2 in1 fan and print cooling fits a little tight but will go use the stock 30mm fan

thingiverse

free

Print head direct e3d v6 Sapphire Pro by QuadroSky

...print head direct e3d v6 sapphire pro by quadrosky thingiverse hi.

thingiverse

free

Leapfrog E3D V6 Printing head by IliasBarthelemy

...tl 1x body.stl (with or without extra support) 2x cableholder.stl 1x e3dholder.stl fusion 360 source file: http://a360.co/2qsbx19

thingiverse

free

Mostly Printed CNC E3D Titan Volcano Extruder (MPCNC) by sunep

...olcano hotend from e3d on our mpcnc. it has a z sensor (servo driven) and a spring loaded print head inspired from the ultimaker.

thingiverse

free

Mount for Cheap chinese E3D replica print head by iamburny

... for cheap chinese e3d replica print head by iamburny thingiverse http://forums.reprap.org/read.php?340,481620,487061#msg-487061

thingiverse

free

E3D 30mm Hot End / Print Fan Fan Mount for E3D Injection Molded Fan Mount by jessefilson94

...o the print bed. this should be perfect for hot ends with silicone sleeves. this requires four 3mm x 25mm screws hope you like it

thingiverse

free

Print cooling fan mount for Duet3D PCB effector and E3D V6 Volcano by andrewturner

...o by andrewturner thingiverse minor modifications to dimensions and angle to extend the bracket to fit when using e3d v6 volcano

thingiverse

free

E3D v6. printing head. BOWDEN. rev.2.0 by operrr

...e3d v6. printing head. bowden. rev.2.0 by operrr thingiverse my first, compact bowden extruder. everything came up from scratch.

thingiverse

free

Large Hexagonal demonstration print for E3D BigBox by DTteacherfromhell

...build space available on a bigbox. can just be printed with a single spool of material if you're careful...

thingiverse

free

Adapted for printed housing - E3D Titan Flex Upgrade by Microspot

...m to my remix of kyle´s printed housing for the titan (https://www.thingiverse.com/thing:2722873), the spring is like 2mm higher.

thingiverse

free

Dual E3D bowden coldend with 50mm fan cooling print and hotends by Nilz

... the e3d fans and don't want to cool the print, and a version which can hold an inductive sensor as an accurate z-endswitch .

thingiverse

free

e3d v6 extruder / print cooler both for 5015 radial fan by motosrac

...an duct for both the extruder fan and the layer cooling fan. you can mount two 5015 radial fan to it. this is for e3d v6 extruder

thingiverse

free

Minimalist Dual E3D V6 Print Head by bmxorcist

... with... one extrusion fan:https://www.thingiverse.com/thing:2740825 two extrusion fans:https://www.thingiverse.com/thing:2731717

thingiverse

free

E3D V6 Heat-Sink Fan Shroud for High Temperature Printing. by GregoryHolloway

...tructables by using the following affiliate links when making purchases. thanks :) ebay.com | ebay.co.uk | ebay.fr | amazon.co.uk

thingiverse

free

Anet A8 e3d v6 Bowden Print Carriage cooling duct remix by DRPrinting3D

... prints and many hours with no signs of warping. credit is due to daniel levinson. for expanding and testing the updated design.

thingiverse

free

E3D Mount K8200 + Fan (3 Part Print) by Erdnuss

...omend loctite 401 to stick them together .... this is printable without supportmaterial !! ---> the reason for this remix :d

thingiverse

free

Geeetech Delta E3D v6 Extruder and print cooling by Langelus

...hotend with 0.8 mm steelwire, probably overkill but i think it's a good idea when all that weight is relying on the snap-fit.

thingiverse

free

Belt holder for Net A8 e3d v6 Bowden Print Carriage Redux by EloRaf3D

...this system. so, i made a new one more accurate. hope you love it! edit : i have added the fusion 360 file if you want to remix !

thingiverse

free

Anet A8 e3d v6 Bowden Print Carriage cooling REDUX remix (duct)

...print cooling end. above all, it is easier air flow, by increasing the cross-section. this increased the air flow to the product.

thingiverse

free

Low Profile Print cooling duct for E3D V6 authentic by DRPrinting3D

... holes in the bottom a little smaller to force air to go around the ring more, and >come out with more force at lower speeds.

thingiverse

free

Print head direct e3d v6 Sapphire Pro by QuadroSky

...done once and then used for a very long time. i consider it absolutely pointless to place the belt tensioning system on the head.

thingiverse

free

Unbranded version of Greg191134's Bondtech BMG + E3D V6 print head by max_davis

...ix removes the embossed text from body of print head. this is for the creality cr-10 but will probably work on the ender as well.

thingiverse

free

Combo holder for E3D v6 cooling fan + radial print cooling fan by fkopac

...table for printers with at least 22 mm free space in front of the hot end and is really compact. now with iges file for remixing.

thingiverse

free

Super Simple ANET A6 E3D Carriage for Bowden *EASY PRINT* by Brentox

...y requires a somewhat accurate printer and patience. this currently does not support the autolevel sensor. highly recommend petg.

thingiverse

free

Wade Extruder dual blower print cooler. E3D compatible. by add1ct3dd

...ud of thing one and it works perfectly. the holes to mount the blowers are slightly angled to ensure they point at the nozzle :).

thingiverse

free

Surround Print Cooler - 40x40 fan (for E3D type hotends) by j3stef by beikeland

...ni; combined the different bodies and added some fillets. big thanks to j3stef for sharing step files to allow easy modification!

thingiverse

free

Print version of metal parts for E3D v6 Belt Driven Direct Extruder (3mm / 1.75mm) for Prusa i3 by krwynn

...5mm) for prusa i3 by krwynn thingiverse 3d print versions of additional metal parts for http://www.thingiverse.com/thing:1066268

thingiverse

free

E3D V6 Ultimaker simple print mount with 40mm fans by Kres

..."e3d new.stl" was corrected the file "e3d v6 elongated.stl" has been added for quiet 40mm hotend cooling fans

thingiverse

free

V3 - e3d clone fan ducts 360° - print and barrel ! - high performance by nasone32

...40x40x20) which has a rotational component. (and for who wonders, this is a good thing because turbulence cools the print better)

thingiverse

free

Mostly Printed CNC -Add On- Peanut Butter and Jam E3D-V6 by divinnaked

...ap plug to insert work in progress i am still working on printing all of the parts i need to build the printer this will go on.

thingiverse

free

E3D holder with Print Cooler and DC42 IR holder by Dignitate

...ngiverse.com/thing:1395051 when i receive the delivery of precision piezo i will make a version based on that z-probing solution.

thingiverse

free

Low noise - E3D 40mm extruder cooler, with 2 x 40mm print cooler by n3doom

...are all 40mm , clearances are fine for deltas. printed this with petg and...

thingiverse

free

V4 - e3d clone CIRCULAR fan ducts 360° - print and barrel ! ultimate edition by nasone32

... with the lcd display on some printers. very little pressure loss. just 6 screws and 6 nuts needed. much easier installation now!

thingiverse

free

E3D Hemera Print Head parts (gMax Upgrade) by CalebCox

...nozzle you'll need to design a new bltouch mount that sets the sensor to the correct height which i haven't designed yet.

thingiverse

free

Anet A8 e3d v6 Bowden Print Carriage cooling duct remix extended 4mm by SkywardDawn

... skywarddawn thingiverse original duct was not long enough to clear block with my hotend mount. extended 4mm to allow clearance.

thingiverse

free

Mendel90 Print fan duct for goliat extruder with E3D V6 by Marcin1415

...ize the hotend hole and little move it for best fit with e3dv6 hotend. the connector is little lowering too. modify with blender.

thingiverse

free

Quiet Lightweight Magnetic Print Head - Kossel - e3D V6 by TBehr

...ed geometry. v1.1 increases the cut out below the fan (reducing the thin wall) i have uploaded a version without the logo text on

thingiverse

free

Adapted for printed housing - E3D Titan 1.75mm Filament Guides by Microspot

...so it fits the printed housing (you can mount the cover as expected), no big change, but maybe someone else faces the same issue.

thingiverse

free

Anet A8 e3d v6 Bowden Print Carriage Redux Remix for CloneE3D by RPSthlm

...tting stress on the rods if they are wider or closer together. props to the original creator for making such an awesome carriage!

thingiverse

free

E3D clone anet A6 by ejpsx

...e3d clone anet a6 by ejpsx thingiverse e3d clone printing head

thingiverse

free

E3d Volcano, 2nd 40mm Fan Duct - Independent Extruder and Print Cooling by JasonPaulBennett

...if you have a tight fit like me. i printed this in abs with a 0.6mm nozzle, 1/3mm layers...

thingiverse

free

Easy print Anycubic Kossel Plus E3D V6 (also Volcano) housing for stock effector

...of the stock mount metal piece. it can be printed without supports - bottom side up. the construction is...

thingiverse

free

E3D Hemera x carriage

...e3d hemera x carriage thingiverse cr-10s e3d hemera x carriage. print on side

thingiverse

free

Diamond Hotend E3D V5 Update : SN04-N circular fanMount duct ring RepRap Prusa i3 by losinapetrovski

...5 - e3d v5 - e3d v5 - e3d v5 - e3d v5v5v5v5 - 55555555 diamond hotend :sn04-n circular fanmount duct ring reprap prusa i3 migbot

thingiverse

free

e3d v6 ender 3

...der 3 thingiverse print in abs or petg+ fits new e3d v6 wires more room in this -print with touching build plate for supports

thingiverse

free

Turnigy Fabrikator E3D mount by lewtheegg

...turnigy fabrikator e3d mount by lewtheegg thingiverse print both parts to make a simple e3d mount for the fabrikator

thingiverse

free

E3d Custom dual by Ashesman

...d v6 with 8mm linear bearings, cooling fan 40mm just mirror and print for other side. all should print with no or little support.

thingiverse

free

E3D Hemera Prusa i3 MK3 Mount

...e3d hemera prusa i3 mk3 mount thingiverse printed files for the e3d hemera prusa i3 mk3...

thingiverse

free

Fan d40 mm mounting for E3D Extruder d25mm by Vo_Van_163

...fan d40 mm mounting for e3d extruder d25mm by vo_van_163 thingiverse easy fan holder for e3d/ fast printing.

thingiverse

free

Ultimaker E3D mount by Nidhoggr

...ultimaker e3d mount by nidhoggr thingiverse no raft, no support needed mount your e3d v5 on your ultimaker with this print

thingiverse

free

4max Pro / Makerbot print head with BMG dual gear extruder & E3D V6 hotend by Hbquax

... design for the cooling shroud (_4 instead of _3) with some stator vanes and a base plug for the fan plus an enlarged air outlet.

thingiverse

free

Hic Hic X-Carriage mount for E3D clone by The-3D-Printing-Guy

...height up from 180mm to 205mm interestingly - i printed this in pla (i ran out of acetone &...

thingiverse

free

40 mm Fan Mount for E3D(25mm) by pkrutogolov

...40 mm fan mount for e3d clone (25mm diameter) printed on anet a8 printed without...

thingiverse

free

BIQU B1 E3D V6 Print Head (RAW MK1) by PJRAW

...use a +/-0.3mm tolerance. the fan ducts must be printed in petg, everything else pla or petg at your...

thingiverse

free

Hypercube E3D Guard Organizer by muratxxf

...hypercube e3d guard organizer by muratxxf thingiverse hypercube organizer and e3d guard mountable 2x30mm fan. very easy print.

thingiverse

free

E3D chimera adapter for Ultimaker 2 by ArcherEG

...h dual fan duct for ultimaker 2. e3d adapter print 100% infill dual fan duct print 40% infill bom 6pcs m3x16 screw 6pcs m3 washer

thingiverse

free

Mendel90 fan housing for use with the E3D hotend by RalphHilton

... the jhead. this is a housing and mounting bracket for a print cooling fan. no additional supports should be needed for printing.

thingiverse

free

Prusa i3 E3D V6 Fan Layer by hawy06

...by hawy06 thingiverse fan layer for a e3d extruders. printed with hips filament. no support...

thingiverse

free

e3d v6 clone water cooling sleave by qcgearhead

...e3d v6 clone water cooling sleave by qcgearhead thingiverse this is water cooling for e3d v6 clone print 100% infil abs

thingiverse

free

Tronxy x3 E3D V6 mount by Gasby

...mount by gasby thingiverse e3d mount with auto leveling, printed in petg. working on a part cooling fan for...

thingiverse

free

E3D variant v4 fan duct by Uwe94

...e3d variant v4 fan duct by uwe94 thingiverse e3d variant v4 fan duct. stable and other fastening. print with support.

thingiverse

free

E3D & RepRapPro by Gaou

...e3d & reprappro by gaou thingiverse happy printing !

thingiverse

free

Anycubic i3 Mega E3D Hemera bowden bracket

... mega e3d hemera bowden bracket thingiverse bracket allowing to install e3d hemera for the bowden setup. print without supports

thingiverse

free

Support E3D extruder for wasp 20x40 by filonirico

...extruder to the wasp 20x40. it need to be printed ...

thingiverse

free

E3d v6 Dual Hotend mount

...hotends ---------------->04.12.2019<------------- scale the print 101% just use a piece of filament as a bolt for the hinge

thingiverse

free

E3D to Leapfrog Creatr by equaldo

...e3d to leapfrog creatr by equaldo thingiverse print. install. enjoy.

thingiverse

free

E3D v6 Nozzle Tray by jlnevill

...e3d v6 nozzle tray by jlnevill thingiverse simple e3d v6 nozzle tray. holds 10 nozzles note: print top face on bed

thingiverse

free

Fan duck for Chinese hotend (clone e3d v5) by cyryllo

... for chinese hotend (clone e3d v5) by cyryllo thingiverse fan duct to cooling printing material. for chinese hotend e3d v5 clone

thingiverse

free

Anet A8 e3d v6 Bowden Print Carriage Redux by dldesign

...print head at the following link. http://www.thingiverse.com/thing:2086437 . the goal was to create a lower profile cooling duct.

thingiverse

free

E3D Volcano Ender 4 mount mix by Kookaburra88

...e3d volcano ender 4 mount mix by kookaburra88 thingiverse printed the original from facet -thanks for that!- and but...

thingiverse

free

E3D Nozzle Holder - 14 Slots by Abcdqfr

...ts by abcdqfr thingiverse simple holder for fourteen 6mm (e3d / j-head) nozzles. designed for best printing with a 0.4mm nozzle.

thingiverse

free

Anet A8 E3D V6 Direct Drive by rcaridade

...e3d v6 direct drive by rcaridade thingiverse another anet a8 e3d v6 direct mount carriage. finish printing it going to test it.

thingiverse

free

E3D 60mm Fan Holder by Dimanjy

...e3d 60mm fan holder by dimanjy thingiverse my first thing i made. 60mm fan holder for e3d hotend. rotate it by 180 before print!

thingiverse

free

Davinci 1.0 E3D V6 by Khing100

...davinci 1.0 e3d v6 by khing100 thingiverse my version for using e3d v6 in my da vinci 1.0 now i can print pla

thingiverse

free

E3D Fan Duct by Democratek

...hotend exhaust onto your print.... done. this duct is printed in two parts, and then the bolts fasten both...

thingiverse

free

Another E3D 30mm Fan mount by ceri

...a new one. enjoy. two versions: the one i printed and a slightly more aesthetic,...

thingiverse

free

E3D Titan Mount for K8200 by washout661

... e3d titan on a k8200. design sized for having the e3d v6 hot end attached so sized to give sensible height spacing to print bed.

thingiverse

free

Printed double IGUS Bearing block for E3D baseplate by bipsen

...he diameter, if it is too loose or tight when printed on your own printer - or send me a message, if you need a custom sized stl.

thingiverse

free

Sidewinder X1 E3D Volcano upgrade by clemens_ex

...sidewinder x1 to a e3d volcano full metal hotend. printed on sidewinder x1 at 0.2 mm...

thingiverse

free

BLTouch adapter for E3D Titan mount by zefram88

...8 thingiverse this should be a perfect-fit and lightweight adapter e3d titan carrier by robflip, just print and put your sensor.

thingiverse

free

E3D Fan Mount MP Select Mini by ripcurl777

...y ripcurl777 thingiverse this is a remix for use with dual fans on mp select mini with e3d head print as orientated in stl file

thingiverse

free

E3D LED support by APineda

... heatsink. attach it to put your leds above the printing surface. leds are connected in series, and with a 100ohm resistor to 12v

thingiverse

free

D-bot Print Carriage for E3D Titan Aero V6 + Ciicooler + BL Touch by jettoblack

...age (1) m4 20mm screw and (1) m4 nut to mount the blower fan to the ciicooler optional: bl touch please let me know your results!

thingiverse

free

Tevo tarantula vertical x carriage for E3D titan & E3D v6 hotend direct drive by Akkie

...n + e3d v6 hotend direct drive. works with stock scews. important : print belt holders with 100% infill, this needs to be strong.

thingiverse

free

X carriage all in one for e3d v6 and bulldog ,for long Alu/Printed blocks. by DeanR

...nt a change for your specific printer feel free to drop a comment. i also would appreciate" i made this" photos. cheers

thingiverse

free

CTC Replicator e3d v6 mount by GsenDK

...6 mount by gsendk thingiverse easy ctc replicator e3d v6 mount. direct drive style. print in abs and use the newest updated file

thingiverse

free

E3D Fan Duct for X carriage Mount by aidan_canavan189

...navan189 thingiverse best fan duct for the remixed mount it may work with other e3d mounts. tolerances are all set for printing.

thingiverse

free

Geeetech G2S double E3D mount by andrewtch

...rse geeetech g2s double e3d extruder mount. work-in-progress, will be updated. print with 80% infills since the loads are heavy.

thingiverse

free

E3D Volcano 40mm Fan + duct

...e3d volcano 40mm fan + duct thingiverse printing in petg o. abs

thingiverse

free

E3D V6 - Nozzle Holder by lemairo

...e3d v6 - nozzle holder by lemairo thingiverse nothing special just print

thingiverse

free

E3D V6 cradle for Sintron TW101 by SteveRiggsPhotography

...e3d support to fit a sintron tw-101 i3 printer. printed in petg. also includes support for print cooling fan...

thingiverse

free

Anet A8 Bowden E3D-V6 print head mounting to suit Micrometer Height Adjuster by sportssedan

...drill the fan mounting holes as they are not printed as there are a few different versions of fans...

thingiverse

free

e3d Volcano fan duct for hypercube by stefi01

...i thickened it all up so it can be printed with...

thingiverse

free

E3DV6_fanduct_Mr-Cozi_V4

...truder and filament cooler for e3d v6 and others by : https://www.thingiverse.com/eipionezero perfect printing with e3d v6 hotend

thingiverse

free

i4 e3d mount by jminer85

...mods that need to be done. needs to be printed with support touching the bed unless you can do...

thingiverse

free

E3D V6 Fan Duct by MaNwE

...e3d v6 fan duct by manwe thingiverse print it horizontal - like file originally

thingiverse

free

E3D Carriage for Anet A8 by psymaker

...anet a8 by psymaker thingiverse uses all existing or printed ...

thingiverse

free

Taz 6 (5 upgrade) fan ducts for e3D v6 by kerthg

...lulzbot+taz+5/5 , and if you have the taz5 it's super easy to upgrade (print) the taz 6 carriage and get two fans like the 6.

thingiverse

free

Swappable E3D v6 holder by rodens

...g radiator and 4010 two turbine fans for blowing the print site. mirror the "blowing" part in slicer for print two part

thingiverse

free

E3D Locking Wedge by huntley

...commend printing it with a layer height of 0.1mm or even 0.05mm. if you'd like to modify it, the openscad source is included.

thingiverse

free

E3D Hotend Mount by Lucas_Heiderich

...te an easy to print and simple dual 4010 fan duct and mount. the fans blow along the nozzle and not on it. work in progress !!!

thingiverse

free

Mendel90 fan housing for use with the E3D hotend by RalphHilton

...is is a replacement housing and mounting bracket for the print cooling fan. no additional supports should be needed for printing.

thingiverse

free

E3D V6 mount for Prusa I3 Rework by NeK6683

...d and then 4 m3x12 to attach e3d to extruder body. print speed: 50 layer height: 0.1 fill: 20% top, bottom and shell thickness: 1

thingiverse

free

E3D Chimera mount for Makerbot Repliator 2X by jifop

...thingiverse e3d chimera mount for makerbot repliator 2x i printed this in abs and its working fine, i will...

thingiverse

free

e3d v6 fan duct 40mm by ChPech

... thingiverse fan duct to fit a 40mm silent fan to the e3d v6 hotend. prints without support. fusion 360 and step files included.

thingiverse

free

E3D v6 Bowden adapter for Bulldog XL Extruder by Banjomaster

...bowden adapter for bulldog xl extruder by banjomaster thingiverse printed this part to allow the bulldog xl extruder to...

thingiverse

free

K8200 E3D-V5 Circular Cooler by Bondeus

...parts. it fits the e3d v5. you will need: printed housing printed e3d mount (remix of kuraasu:s part) 3...

thingiverse

free

MPSM E3D mount w/blower by tekhertz

...fans definitely has room for improvement, but works if printed slow. i included a single print layout with all...

thingiverse

free

Chip clip by wadded

...thingiverse this is a chip clip designed to be printed with an e3d volcano with the 1mm nozzle. prints...

thingiverse

free

Toilet roll cloud by DTteacherfromhell

...cloud by dtteacherfromhell thingiverse cloud shaped toilet roll holder. printed in two sections, and then pushed together using the...

thingiverse

free

bl touch mount for alfawise w/ e3d v6 by elimisback

...for alfawise w/ e3d v6 by elimisback thingiverse i printed this e3d v6 mount https://www.thingiverse.com/thing:3181800 and needed to add...

thingiverse

free

Fan mount 4x4 for e3d v5 I by susiloharjo

... for e3d v5 chinese version, 40x40mm fan , design using solvespave if you want modified it, edit file solvespace happy printing

thingiverse

free

Compact layer fan duct for E3D Chimera by martinengstrom

...tprint layer fan duct for mounting on the back of a e3d chimera/cyklops hotend. it can be a little tricky to print. use supports.

thingiverse

free

E3D v6 Quick Fan 30mm by Smuk3D

...improvements and some design things i like :-) not printed jet .. wait for finishing an other job...