thingiverse

free

Roller Nut and Race for Crossbow by Bhurak

...all pinholes are 1/8". for the roller nut either ream the hole out or use a slightly undersized pin to facilitate rotation.

thingiverse

free

Hand spinner nut M12 and roller ballbearing by archi888

...and spinner nut m12 and roller ballbearing by archi888 thingiverse use only one ballbearing with nut adapter for three m12 nuts.

thingiverse

free

Roller for 8x60mm bolt and nut - easy to print ~ 1h 15min by heikkimus

...so. this model requires no supports and is designed for 3d-printing. for making this you'll also need a 8x60+mm bolt and nut.

thingiverse

free

Workbench roller holder for 45x45 Alu Profil (Slot 10, Nut 10) by Niels1982

...ust plug to the butt end of the profile. printed with 100% infill and treated afterwards with aceton to get the maximum strength.

thingiverse

free

Creality Ender 3 Small spool holder

...for the ender 3 are using a screw type nut instead of a lock nut (probably a new design...

thingiverse

free

H0 Roller test stand by duyne17

...h0 roller test bank. required: bolt m3x16 ring m3 nut m3 lock nut m3 ball bearing...

thingiverse

free

Hex Nut Fidget Spinner by LinkPlayzFTW

...a 3d printed fidget spinner that uses a 608 roller skate bearing and 3xm8 hex...

thingiverse

free

Simple roller for the small spool rack that you can find in thingiverse by waynedavisrocks

...of buying rollers, just print some, along with some nut and...

thingiverse

free

Filament puller for DIY Extruder by axelsp

...x4, m8 rod for roller centers. roller is m3 nutscrew. bottom roller d35 h60 top idler d25 h60 nema17...

thingiverse

free

Skate Tool finger ring for roller skates & skateboards by bahare3393

...its off the axle so you don't lose the nut ...

thingiverse

free

0.20€ Roller Shutters Stopper by gpuccio87

...with a notch for a m4 countersunk screw m4 nut and screw...

thingiverse

free

Roller blind string retainer by Nitor

...retainer. uses a 16mm m5 screw and a m5 nut to hold...

thingiverse

free

Ender 3 Filament Feed Roller by Brooksy090

...to your frame, also an m5 bolt and nylock nut to mount the...

thingiverse

free

Biqu B1 Filament Roller Guide by HgArgen

...a 22x8x7mm bearing (608) and a m4x20mm screw with nut are...

thingiverse

free

Camera Roller by Acourville

...i hate going to the hardware store to get nut an bolts for a 3d printing project. this roller...

thingiverse

free

2020 Spool Roller

...here's my spool roller... it needs 4x m3 screws, nut and 608 bearings. fits the 2020 well and its...

thingiverse

free

Top mounted filament roller

...requires fidget spinner bearing and m4 bolt and t nut ...

thingiverse

free

Toothpaste Roller

...roller thingiverse extended the original object, eliminating the square nut elongating it to fit more tubes, and adding a...

thingiverse

free

Massage roller by Slawa919

...to counter the screw, you have to heat the nut and then press it into the...

thingiverse

free

3D Printer Roller Guider by penomo

...prevent sideslip of material spools of various sizes. m3 nut capbolt m3 x...

thingiverse

free

Filament Guide with Retaining Roller (for CR10) by TeepsDeluxe

...sides of the body, and fix with an m3 screw/nut slide the idler onto the idler strut. slide the...

thingiverse

free

Ortur-nut-holder by liquidd

...for the ortur rotary to help you adjust the roller without having to have a wrench. it holds the...

thingiverse

free

AGT Solder Roller by Diemex

...minimum inner diameter of 11mm. required hardware 2 m3 nut 2 m3 bolts, min length 18mm cad designed in...

thingiverse

free

Filament run out sensor case- Mechanical endstop with roller by Hussainbhavnagarwala

...end-stop with a roller. requires two m3 bolt and nut. can be fastened onto any...

thingiverse

free

Two Trees Bluer Sensor Guide by UgurEyigun

...two trees bluer sensor guide parts; frame, roller, screw, nut ...

thingiverse

free

Derived Mini Kossel Roller Carriage by errolt

...converted the design to open scad. also made the nut traps a little...

thingiverse

free

MPCNC M4 Nut Expander by Chordless

...the "short" nut expander is for use in the roller and rollerm mpcnc-parts. the slots for nuts in these...

thingiverse

free

Print-Rite Y-axis Remix by Not1ofthepack

...to assemble for the roller and added a captive nut for the z...

thingiverse

free

Filament Spool Adaptor by gordon37

...filament spool adaptor by gordon37 thingiverse bolt and nut generated fromhttp://www.thingiverse.com/thing:193647 bearing and wheel are took from a...

thingiverse

free

CR-10v2 Filament Guide Dual Rollers

...roller to help it. requires 2 608 bearings small screw/nut to attach to existing hole next to the filament...

thingiverse

free

Filament Spool Roller by DesignCell

...ball bearing 6x17x6 https://goo.gl/zpcvht (4) m6x25 screws (4) m6 nut (8) m6...

thingiverse

free

Cheap Roller Carriage for DLT-180(Chinese Kossel 2020) by niisaka

...bearing do-22-h6) 3x m6x30-35mm countersink screws 3x m6 nyloc nut 2x m3x10mm screws 1x m3x15-25mm screw 3x m3 nuts...

thingiverse

free

Filament holder PRUSA İ3 by Smtakkaya

...skf 6001 2rs roller 12x28x8 2x= m4(16) screw and nut ...

thingiverse

free

Roller skate plate mounting tool by hobbesdog

...of the sure-grip snyder marking tool. uses 6x 6-32 nut and...

thingiverse

free

Filament Roller by akku3D

...printed parts 4 bearings 626zz 8 bolts m3*20 8 nut ...

thingiverse

free

Modified Kossel Mini 2020 Roller for Sintron Endstops by SandraK82

...by sandrak82 thingiverse added larger upper part with m3 nut and hole for easier endstop...

thingiverse

free

TPU one-piece v-roller for 608 bearings by roliko

...rods for the original drybox - i only used nut for the outer rollers to hold them in place...

thingiverse

free

Pizza Docker by adyb1975

...of them with 20% infill. got a screw and nut from home depot and assembled. roller source:...

thingiverse

free

Mecanum wheels

...the rollers. next fasten then with m4 bolts and nut . then attach rollers to the wheel bases in...

thingiverse

free

Filament Bearing Spinner by Supercell

...1.75mm filament cut into 27 5mm long rollers. m6 nut may be used to increase the weight at the...

thingiverse

free

Massage Roller

...will need: 2x 623zz (3x10x4mm ball bearings) 2x m3 nut 2x m3x16 flat head screw (or...

thingiverse

free

Completely Printable Spool Roller by BryRuano

...hardware store! based on jstck's spool rollers, mouserunner's dome nut, and michaltrow's machine...

thingiverse

free

Low Profile 2020 Ball Bearing Delrin Roller Carriage FolgerTech Delta by CMPresby

...hardware needed: m5x25mm phillips raised countersunk (9x) m5 nyloc nut (9x) m3x16mm cap head allen (9x) m3 nyloc nuts...

thingiverse

free

Vector 3 Reel Roller by rosanegra

...over the fixing plate and attach using the butterfly nut adjust for the reel you are printing with. note...

thingiverse

free

Adjustable filament sensor with PTFE tube

...is adjustable with min m3x12 screw and 2 m3 nut. ...

thingiverse

free

Heavy Duty Simple z-sync by PsykoJ

...psykoj thingiverse printed this on 80% infill, used m5 nut and screws. idle roller and loop gt2 timing belt...

thingiverse

free

Asus ROG (Republic of Gamers) GPU Holder (Stand) by Harun_C

...help of glue. requirements: screws: m4x35 ; 2 pieces nut: m4 ; 2 pieces washer ; m4 ; 4...

thingiverse

free

Roller by arkeet

...screw 2x m5 hex nut 2x m5 washer (the nut and washers could be replaced with printed...

thingiverse

free

Universal Spool Roller by DWONH

...& stand. it uses 608zz bearings, no bolts and nut are required to assemble. roller parts is 12cm long...

thingiverse

free

SPOOL ROLLER by Mongrel

...5 x m3 x 35 screws ,5 x m3 nut and 5x zz809 bearings. for the filament guide search...

thingiverse

free

Tapered roller filament spool (Bearing 608ZZ) by cisko

...spool (bearing 608zz) by cisko thingiverse cone 60mm + nut fastener 8 mm spool filament (x2). use 2 model...

thingiverse

free

Rostock Max Large Spool holder by HJ3D

...1 washer m8 2 self-locking nuts/nylocs, or 4 normal nut 1 piece of min 100mm long 1.75mm filament the...

thingiverse

free

Triangle spinner by mdeudon

...i've set it up to 9.8mm, then force the nut with a plier to make it enter in the...

thingiverse

free

Filament rollers using 608ZZ bearings

...without screws or anything. i added m3 bolts and nut myself for extra strength, but it should not need...

thingiverse

free

Ender 3 Filament Guide - Lower roller by jak0lantash

...4040 extrusion, so i made a bracket with t nut to re-inforce it. i did not test the version...

thingiverse

free

Top Mount Filament Holder With Bearings by hasbridge

...(2) 608 skateboard bearings (1) m8x50 bolt (1) m8 nut directions: press both bearings into roller. using a socket...

thingiverse

free

Filament Roller Stand by X50arm

...the nuts. you can adjust the tension of the nut to adjust how freely the spools turn. update: i’ve...

thingiverse

free

K8200 Spool Holder by spacekoaster

...4x 608 ball bearings 2x m5x12 screws with corresponding nut 4x m6x30 screws with corresponding nuts print: 2x spool...

thingiverse

free

ERC Timsav dual roller x tensioner by Dudley1001

...the x rail. it will require another roller and bolt/nut i recommend printing at a high rate of infill...

thingiverse

free

Ender Filament guide with Roller

...a jaw with roller wheel, and axle bolt with nut printed the hardware as i'm cheap and this will...

thingiverse

free

Misterguru X Belt Tensioner all STOCK bolts remix for Tronxy XY2 Pro by omhrosa

...fits the tronxy xy2 pro with stock roller and t-nut resolution: 0.2 infill:...

thingiverse

free

Voxelab Aquila Filament Guide Roller by Jameswis

...it there. requires 1 608 bearing m4x16 screw and nut ...

thingiverse

free

Stronger bottom filament feeder system by woodwaker

...threaded rod and 2 nuts threaded rods: https://smile.amazon.com/gp/product/b0819shtmr/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1 hex nut: https://smile.amazon.com/gp/product/b07mnmmphd/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1 see original also...

thingiverse

free

Filament Roller Guide for Sunlu Filadryer S1 Top Mounting by yohannaftali

...ring.stl and 2 spacer.stl from holspeed use m3x20 and nut to attach the bearing also attached ipt file to...

thingiverse

free

Ender 3 Filament Roller by Simbioziz

...22mm x 7mm) 3) m4 x 16mm bolt and nut attachment contains solidworks files if you want to fix...

thingiverse

free

Sculpto Pro 2 Mount for Hybrid Modular Spool Roller by PearlGreyMusic

...parent thinghttps://www.thingiverse.com/thing:4604370 requires 8x m4 screws and 8x m4 nut ...

thingiverse

free

Window Roller Blind Clip

...the blind (and the change in light) drives me nut, so i made this to keep the blind in...

thingiverse

free

E180 y-axis rail roller pressure adjuster by ybjack

...: 1 m3x16mm cap screw : 1 m3 square nut : 1 for installation, use the original...

thingiverse

free

Roller Ball Bearing Filament Spool Insert by tonyhansen

...allows the ball bearings to be separated from the nut/spring clip attached to the threaded rod. numerous prints were...

thingiverse

free

Filament roller experiment by spegelius

...same mechanism install the long shaft using the big nut fasten it to the frame part that doesn't have...

thingiverse

free

Acme 1/2-10 5 start Threaded Nut and Sleeve by CuttingEdgeData

...will be turned on a lathe to fit a roller ...

thingiverse

free

Ikea Dry box remix by rasmusaaen

...lip, so the roller prints without support. added a nut for the pneumatic connector and a cap. the cap...

thingiverse

free

Ender 3 Filament Roller Guide - 693 bearing

...really necessary. you will also need m3 screw and nut ...

thingiverse

free

Spool Holder with Clip in Bearings by TheViralDIY

...can't slip out with no effort. the bolt/mount & nut are stock from the original filler (thing:3020026) and the...

thingiverse

free

Pan tilt with mobius/runcam holder by nielserik

...needed are 4 + 2 + 25mm screw and nut ,and some 2 +10 self tapping...

thingiverse

free

Ender 3 Spool Filament Cylindrical Bearing

...holder remix (https://www.thingiverse.com/thing:2666741) + ender 2 / 3 spool nut (https://www.thingiverse.com/thing:2944665/comments) one of the images will give you an...

thingiverse

free

Filament Spool Holder by onepointdiy

...hole or m6 tap. assemble with m6 bolts and nut. then snap on your...

thingiverse

free

Bike Rollers by phrc001

...each side of the bearing, and then one more nut to lock the bearing in place from the outside....

thingiverse

free

Sports Roller for Muscles and Foot Massage by Goingmad

...steel 8mm threaded rod, 320mm long 2x m8 steel nut 2x 608 bearings assemble as shown in the exploded...

thingiverse

free

Ender3 Filament Holder Right Side by CaptKirk

...holder design. you use this file to replace the nut and just print out another set of the original...

thingiverse

free

Anti-Jam Skate Bearing Spool Roller

...a 8mm threaded rod, lightly hold in place with nut. give enough room on the sides so that spools...

thingiverse

free

Transporting rollers by DreiDimensionaleRevolution

...8x7x22mm 1 screw m5x12 1 screw m5x30 2 self-locking nut m5 3 screws 2.9x9.5mm to fix the rollers wherever...

thingiverse

free

Filament Roller Guide for Ender-3 pro by Sirmyself

...608zz bearing) and one m5 screw and nut. the nut should embed flush with the plastic. the model also...

thingiverse

free

525 MPCNC (IE/US/1") - Belt Tensioner + Corner Block by Martin_S

...very well. i thinks this ones are the same: http://www.ebay.com/itm/100x-flat-head-metric-blind-rivet-nutinsert-rivnut-nutsert-assortment-kit-screw-/281802239497 ...

thingiverse

free

Ender 3 - cable guide roller by MiroslavMichalina

...https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the bibo bed. it...

thingiverse

free

Ender 3 Filament Roller Guide (Remixed) by thanapolboss

...following list is required m3*20mm bolt m3 nylon lock nut 608 ball...

thingiverse

free

Anet A 2 Plus X belt tensioner by HIDE_KUMA

...with reference to y-belt tensioner for tevo. an eccentric nut was used for rattling prevention and x axis tilt...

thingiverse

free

SELF CENTERING Filament Spool Holder modular/multiple spools by OverKill_By_Marc

...(or 5/16" by 4 1/2"), two self locking (lock) nut to fit it and 4 standard 608 skateboard bearings....

thingiverse

free

Brompton rollers/wheels replacement with bearing by Bokix

...stock rollers support is only needed for the m4 nut holes on the top...

thingiverse

free

Camera Slider (w/ Inventor files) by ryan_slam

...roller v2 is has a larger hole to accommodate nut supports: the mounting plate prints well if positioned with...

thingiverse

free

3D Printer Filament Roller by ElecTrackProjects

...with heatsert version) - t.ly/35ri m3 nuts(used with hex nut version) - t.ly/runp m3x12mm screws - t.ly/k38i m3 fender...

thingiverse

free

60mm spool roller by NeK6683

...bearing 4x m3x20 screw 8x m3 washer 4x m3 nut 1x printed...

thingiverse

free

SPOOL HOLDER for Mendel by titimeg

...four 3d printed parts, 2 roller bearing, four m8 nut and a threaded rod m8x150mm. the spacing of the...

thingiverse

free

Sports Roller - Imperial Remix

...need to pay a premium for metric rods and nut. see the original post for all the parts you...

thingiverse

free

Tarantula Pro Fillament Feeder

...in side the roller and a m5 bolt and nut as shaft. the whole feeder bolts on the z...

thingiverse

free

70mm Mecanum Wheel by ab86uk

...10 rollers are identical. construction 4x m4 screws and nut hold the wheel hubs together and stop independent rotation....

thingiverse

free

Remixed Puller to fit ender 2 Belt Rollers. by Dfr2923

...from. you will need an m5 bolt and lock nut for this. i am using 30mm but i think...

thingiverse

free

Roller for the bottom of a Print-Rite 3D printer by zipcode

...role on a roller on a 8-32 bolt and nut the vibration has gone when traveling at high speeds....

thingiverse

free

Z Morph Spool Holder by tandcphoto

...of diameter 10 x 110 mm long bar. the nut and bolts are m4x10 and m6x30 with an m6...

thingiverse

free

Adjustable filament spool roller by Cuzi1200

...x 25mm screws, along with the complimentary washers and nut. i also added some rubber feet to the bottom...

thingiverse

free

Ender 5 plus x-axes roller cover by ardenghegedus

...https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the bibo bed. it...

thingiverse

free

Ender 3 Filament Holder by Mikalayka

...two 608zz bearings. remix: curved roller (https://www.thingiverse.com/thing:4244293) screw & nut ...

thingiverse

free

ERC Timsav cutter and laser mount by Dudley1001

...slides used and and the laser mount use eccentric nut to tighten the rollers to the rails. the x...

thingiverse

free

Bruder style roller by djnoyz

...have a slot to insert an m6 threaded nylon nut i used a piece of scrap pvc tubing 50mm...

thingiverse

free

Ian's updated reel roller by tmbg

...http://www.thingiverse.com/thing:21435 ) to counterbore the screw heads and provide nut pockets, both to clean up the exterior and allow...

thingiverse

free

Filler Drop Down for CoreXY with side panels by Phantom329

...the guide and roller. uses m5x10mm bolts and m5 t-nut. ...

thingiverse

free

Spool Support Roller by Normand

...can be printed fast. require support. bom: 4x m3 nut 4x m3 hex socket screw 4x 16x8x5mm bearing...

thingiverse

free

3D printed PB spool stand by diginho

...you need 4 roller bearings and 2 bolts and nut ...

thingiverse

free

TX16S Folding Handle Mod by JBJBJB82

...x m3 set screw l6-10 4 x m3 hex nut 2 x m3 flat washer note that the left...

thingiverse

free

Ender 3 (All version) 3D Printed Standing Bracket by oXanderXo

...be on the holes of the brackets. bolts & nut needed for all the 3d printed parts: 608 bearing...

thingiverse

free

Creality (Ender 3) Filament holder

...need two countersunk screws m4x15. it uses original creality nut i used roller - extended to catch 10mm dia...

thingiverse

free

Film development Roller by mortenkolve

...threaded rod (as axis) a hand full of m6 nut and washers m3 screws and inserts to secure the...

thingiverse

free

Ender 3 Pro Filament Roller and Guide (20201205 ver 1.2) by broosed

...are used to attach the brass z axis screw nut the filament roller and wheel attach without screws and...

thingiverse

free

2020 Spool roller w/ 608 bearing and no bolts by joochung

...for a m3 bolt. so use a comparable m3 nut ...

thingiverse

free

CineRollers by Souristoutirabien

...list for each of the cine roller supports m5.0 nut m5x25 d roller wheels - 63mm - 2.48” -...

thingiverse

free

Hemera Spacer Mount for FYSETC Direct Drive Plate by icase81

...wrench and appropriately sized spanner wrench for the nylock nut. install entire assembly on...

thingiverse

free

Artillery Sidewinder X1 Filament Spool Roll Holder

...of aluminium or other stable material. (optional) some m5 nut and washers (you can use the nuts supplied, but...

thingiverse

free

Anet A2 Plus X Motor Holder by HIDE_KUMA

...spacer (adjusted for each eccentric nut according to eccentric nut 2 pieces) are necessary. the position of the limit...

thingiverse

free

22mm bearing clamp by billTheTailor

...skate, roller skate). uses a #3 screw and 2 nut for the clamping bit. has to flanges on either...

thingiverse

free

Filament Spool Roller by JamesRX

...x 2 (20mm longer than the pvc pipe) m8 nut ...