851 degree fpv 3d models found
Download or buy, then render or print from the shops or marketplaces.
3D Models below are suitable not only for printing but also for any
computer graphics like CG, VFX, Animation, or even CAD. You can print these 3d models on
your favorite 3d printer or render them with your preferred render engine.
Please note that the 3D model database is only a Search Engine. You should
visit the original websites. Most of the models can be easily imported and rendered
with Autodesk 3ds Max, Maya, Blender, C4D, and Sketchup. Check for online
3d model conversions tools for your file format.
Shown 1 of
8 pages
thingiverse
free
FPV Camera Mount 30 Degree fixed by DrHammer
...fpv camera mount 30 degree fixed by drhammer
thingiverse
30 degree fixed angle mount for fpv cameras.
thingiverse
free
FPV cam tilt degree meter by oxivanisher
...t degree meter by oxivanisher
thingiverse
this tool is a easy way to measure your fpv cam tilt degree.
each opening is 10° wide.
thingiverse
free
Fpv SJCam SJ5000x Camera mount 20 degree by Rangerz521
...fpv sjcam sj5000x camera mount 20 degree by rangerz521
thingiverse
fpv sjcam sj5000x camera mount 20 degree
thingiverse
free
RunCam 30 degree tilt FPV mount by mattster98
...unt by mattster98
thingiverse
based on a model of the stock base the runcam comes with, tilted at 30 degrees for high-speed fpv.
thingiverse
free
45 degree Cam Mount for Nano FPV Camera
...o fpv camera
thingiverse
45 degree fpv camera mount for standard nano size cameras. standoff distance is 25mm center-to-center.
thingiverse
free
50 degree Cam Mount for Nano FPV Camera
...o fpv camera
thingiverse
50 degree fpv camera mount for standard nano size cameras. standoff distance is 25mm center-to-center.
thingiverse
free
20 degree FPV camera holder for DIATONE 37 by lubostn
...20 degree fpv camera holder for diatone 37 by lubostn
thingiverse
20 degree fpv camera holder for diatone 37 250mm quadcopter.
thingiverse
free
Airblade Assault 17 Degree fpv cam mount by ictoamn
...e.com/fpv/cameras/flight-cameras/micro-600tvl-110-degree-camera.html
i de-soldered the mic from the cam board for easier mounting
thingiverse
free
goby 180 19 degree fpv mount by runaway380
...goby 180 19 degree fpv mount by runaway380
thingiverse
this is a camera tilt for rmrc goby180 in 19 degrees
thingiverse
free
20 Degree FPV Camera Mount by Bromego
..._32ch_video_tx_rx_cp_antennas_and_camera_pnf_.html)
also fits 30x30x10mm fpv cameras
[turn design on side for best print results]
thingiverse
free
10 Degree FPV Camera Mount by Bromego
...a mount by bromego
thingiverse
this fits the hobby king quanum complete fpv goggle and camera kit,
also fits 30x30x10mm cameras
thingiverse
free
10 Degree Cameramount EMAX Pro 250 FPV Racer by norf
...0 degree cameramount emax pro 250 fpv racer by norf
thingiverse
camera holder for fpv cam with 10 degrees for better speeding :)
thingiverse
free
GoPro 30 Degree FPV by skullndrones
...gopro 30 degree fpv by skullndrones
thingiverse
get skull and drones racing frames here: http://goo.gl/oquzpm
thingiverse
free
Mobius 90degree FPV "10 degree angle" by grimling100
...mobius 90degree fpv "10 degree angle" by grimling100
thingiverse
mobius 90degree fpv cam "10degree angle"
thingiverse
free
ZMR 250 FPV CAM mount 25 degrees by s3nf
...nt 25 degrees by s3nf
thingiverse
fpv cam-mount for the zmr250 frame and a runcam mini fpv kamera 600tvl.
supports bigger lenses
thingiverse
free
FPV cam fixed 30 degree by Tbrady420
...s cam mount lets you rest the barrel of the lens. this keeps a fixed angle of 30 degrees. no more guess work of your camera angle
thingiverse
free
GoPro Session FPV Quadcopter Mount 25 Degrees by chmod755
...on mount that can be ziptied to many types of fpv quadcopter frames.
print in tpu, infill 100%, lying on its side, with supports.
thingiverse
free
25 degrees sony fpv board cam mount by ThomG
...es fpv board cam mount.
this mount will slide over the srew holes of a board cam.
you need to print on like this and one mirrord.
thingiverse
free
30 and 45 degree angle FPV racing 600tvl mount by kwaaaa
...e
this is a 30 degree angle camera mount for aggressive fpv racing. for fatshark 600tvl cmos cams, please check my other upload.
thingiverse
free
600tvl cmos cam FPV 30 degree racing mount by kwaaaa
...aaa
thingiverse
600tvl cmos camera mount for fpv racing. it's made with a 30 degree tilt angle for very fast forward racing.
thingiverse
free
Xiaomi iy 35 degrees Mount for FPV by Kassiolm
... is my redraw to put 5 more degrees in the original design by jingwei li with 30 degreeshttps://www.thingiverse.com/thing:1474602
thingiverse
free
BeeRotor FPV Racing Battery Mount 30 Degree by rctimer
...beerotor fpv racing battery mount 30 degree by rctimer
thingiverse
for your battery holder
thingiverse
free
Mobius 15 Degree Angle Mount for FPV by moshen
... for fast flying. optimized for weight and minimal front surface area. weighs only 3 grams when printed at 2 shells and 10% fill.
thingiverse
free
QAV 8 Degree FPV Mount by Spik3e
...39;s only 8 degrees dunno why it was just a rough draft to test plus i'm still new at flying. i'll add more angles later.
thingiverse
free
DJI FPV camera mount 10-40 degrees
...pv camera with changeable camera angles.
built for hskrc twe210 frame but normally you should be able to change it to your needs.
thingiverse
free
Mark4 HD5 FPV Camera Mount (Fixed at 20 Degrees) by skylinebeats
...mark4 hd5 fpv camera mount (fixed at 20 degrees) by skylinebeats
thingiverse
print in tpu.
thingiverse
free
4.3 inch FPV LCD Screen stand 20 degrees
...tps://www.banggood.com/5_8g-48ch-4_3-inch-lcd-480x22-169-ntscpal-fpv-monitor-auto-search-with-osd-build-in-battery-p-1364626.html
thingiverse
free
Elgae FPV Camera Mount - 15 degree(Emax KnightHawk 250) by RotorGator
...v camera mount for emax knighthawk 250 quad. top piece has cover for camera to to keep from moving and to protect against debris.
thingiverse
free
Eachine FPV Camera Quadcopter Mount (30 degrees) by ifconfig
...th!) the camera is secured to the mount with a zip tie, but the mounting between the mount and the frame is completely up to you.
thingiverse
free
30 degree angle FPV racing Fatshark 600tvl mount by kwaaaa
... will need supports, so please enable printing with supports! for sony board cams 600tvl cmos cams, please check my other upload.
thingiverse
free
Elgae V700 FPV Camera mount for Hobby King Color 250 Quadcopter 25 degree by smennie
...or 250 class fpv quadcopter frame.
vertical height: 37mm
distance between posts: 28mm
camera angle: 25 degrees
post diameter: 5mm
thingiverse
free
Board Camera uptilt 16 degrees for FPV by amorkia
...cute angle just trim the top screw mounts.
shoutout: to http://www.rc-matters.com great place to get my second hand fpv stuff.
thingiverse
free
SJ4000 - 20 degree tilted mount for FPV quadcopter by janmittner
... any fpv quad. simply attach the mount to the frame with double-sided tape, put the camera on it and wrap with some velcro strap.
thingiverse
free
Inductrix FPV 20 degree camera mount by AlternativeRC
...the camera securely, and added a third screw hole at the back of the mount, maybe it wasn't necessary, but i figured why not?
thingiverse
free
Spyderbyte 180 fpv micro camera mount 30 degrees by Absu
...spyderbyte 180 fpv micro camera mount 30 degrees by absu
thingiverse
spyderbyte 180 micro camera mount.
thingiverse
free
dji fpv camera standoff mount 15, 20 degrees by shantyspoon
...to over tighten, screws are a tight fit in tpu depending on printer settings
print in tpu
for the dji fpv camera on 5mm standoffs
thingiverse
free
15 degree FPV Inductrix Mount by NorCAL3D
...y suggest trying their protek batteries as well.
https://www.amainhobbies.com/blade-inductrix-fpv-replacement-parts-racing/c10476
thingiverse
free
FPV 700tvl 600tvl 45 degree camera holder by harryarnold
...fpv 700tvl 600tvl 45 degree camera holder by harryarnold
thingiverse
tiny mount for tvl 600&700. extreme racing angle...
thingiverse
free
Mobius lightweight 20, 25 and 30 degree tilt for FPV by philsson
... fpv by philsson
thingiverse
my design on a cardboard mounted mount for the mobius
edit 27/6-15:
added 20 and 25 degree mounts
thingiverse
free
FPV Cam Holder SJCAM M10+ Plus @ 35 Degree by bdgsniper
...fpv cam holder sjcam m10+ plus @ 35 degree by bdgsniper
thingiverse
for printing with flex tpu
25% infill
with supports
thingiverse
free
AstroX5 Johnny FPV 20 Degree GoPro HERO5 Session Couch Mount by WaFL_FPV
...5 session couch mount! there are props in the shot unfortunately but i'm working on adjusting it to get them out of the shot.
thingiverse
free
12-Degree Mobius Mount for FPV by Bosnianbill
...l catch more of your flight. there is a hole to pass through a zip tie to lock down your camera during acrobatics (and crashes).
thingiverse
free
Xiaomi Yi - 20 degree tilted mount for FPV quadcopter by janmittner
... any fpv quad. simply attach the mount to the frame with double-sided tape, put the camera on it and wrap with some velcro strap.
thingiverse
free
Martian II - Eachine FPV Camera Mount - 25.35 degrees
...ew fpv racing build, so i thought i'd share for everyone else. i used a brim cause the skirt allowed for warping on my cr-10.
thingiverse
free
FPV Camera holder for Eachine 1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera by Jakov
...he base was splitted in three parts for a stronger build, so you will need to glue togeter. m3 screw needed for the folding joint
thingiverse
free
20 Degree FPV CCD Camera Tilt Mounts by KevinKuwata
...camera.
same set of screws from the eachine 250 camera and faceplate.
built in supports can easily be cut off with wire cutters.
thingiverse
free
Airblade Assault 17 Degree fpv cam mount by ictoamn
...m mount by ictoamn
thingiverse
airblade assualt cam mount. i just glue the cam in and glued it to the frame. seems to work well.
thingiverse
free
FPV Pan mount for TGY-1800 180 degree servo. by omegooliebird
...han one plane. requires 6mm carbon-fibre tube x 90mm long. cables go in the triangular slot in the aerofoil section of the stand.
thingiverse
free
FPV 2.8GHz receiver 90 degree adapter/cover for cable ties by Gregor___
...fpv 2.8ghz receiver 90 degree adapter/cover for cable ties by gregor___
thingiverse
receiver antenna cover suit with cable ties.
thingiverse
free
FPV Cam Adapter 10°/degree 250 Quad by moevie27
...ill: 20%
layer height: 0,1mm
temp: extruder 190° / plate 55°
if you print it i would be happy about a "made" picture :)
thingiverse
free
HGLRC sector 150 fpv gopro mount 15 degrees by bartdesloovere
...pro mount 15 degrees by bartdesloovere
thingiverse
universal gopro mount for the hglrc 150 frame using a strap around the camera
thingiverse
free
GoPro Hero6 FPV Mount Hero 6 drone 30 degree
...gopro hero6 fpv mount hero 6 drone 30 degree
thingiverse
gopro hero 6 mount for my frame.
it has 30.5x30.50 mounting holes
thingiverse
free
7 degree tilt inserts (FPV Racing) by krtek2k
...est racer arms on this server, on a zmr 250 shape. it will tilt motors just accurately in front orientation.
print 2pcs and 2pcs.
thingiverse
free
FPV Cycle/Kabab FPV Glide GoPro Hero 5 Session ND Filter Mount 20, 25, 30 Degrees by toubs
...ust the angle to your liking. just move the gopro body to your desired angle, merge the two bodies and create a support structure
thingiverse
free
FPV Cycle/Kabab FPV Glide GoPro Hero 8 ND Filter Mount 20, 25, 30 Degrees by toubs
...ust the angle to your liking. just move the gopro body to your desired angle, merge the two bodies and create a support structure
thingiverse
free
Martian 2 FPV camera mount 25 degree HS1177 style by taboaco
...d angle of 25 degrees to use with hs1177 style camera, print in tpu it absorbs impact
made in mind to be used with 28mm standoffs
thingiverse
free
Hero Session 30 degree FPV Mount "Fatter" by pauloremigio
...ingiverse
added some "fatter" front and top walls to protect the camera a little better when using flexible materials.
thingiverse
free
Mobius 20 Degree mount for Martian 5" FPV frame by Phrozius
...ot; frame.
bolt holes are 34mm x53mm.
step file included if you want to modify it.
print with 10% infill to keep it light.
enjoy.
thingiverse
free
mobius 40 degrees mount for FPV / QUAD / Strap mounting by dgworks
...yet tested
*8/2/17 made some minor adjustments like
extented bottom plate for battery protection
holes in the middle for air flow
thingiverse
free
Wizzard FPV camera angle mount 15 and 27 degrees by meltair
...ed in petg with 0,3mm layer hight and you will need two additional m3 screws to fix it to the holes already present in the frame.
thingiverse
free
FPV Skyzone RC-700D monitor mount for FrSky Taranis X9D transmitter with 45-degree angle by Slider235
...smitter with 45-degree angle by slider235
thingiverse
this is my vision, how must look fpv monitor holder for maximum usability.
thingiverse
free
Mount for 600TVL 1/4 1.8mm CMOS FPV 170 Degree Camera by nppc
...lt of the camera is 30 deg.
distance between mounting holes is 15mm.
height of the mount is 15mm.
can print it in pla, petg, abs.
thingiverse
free
GoPro Hero+ 20 Degree Mount for Drone/Quadrotor/FPV by RockstarAlchemist
...ut of it's case. this is a 20 degree angle mount. if you want another angle, let me know.
8/24/2016: added a 5 degree mount
thingiverse
free
Lumenier Chief Micro FPV Mount - Fixed 40 degree
...rge squared front casing. for those cameras or for better camera protection, check out the full size pod-style front mount here.
thingiverse
free
GRL FPV PRO 2 GoPro Session Mount 20/25/30/35/40 degrees by RODINFPV
...grl fpv pro 2 gopro session mount 20/25/30/35/40 degrees by rodinfpv
thingiverse
thingiverse
free
QAV LISAM210 FPV CAM MOUNT SET 30, 33, 40 DEGREE ANGLE by giek2000
...m spacer width. made for my ls210.
20mm and 30mm height with 30, 33, and 40 degree mounts.
secure the cam easily with a zip tie!
thingiverse
free
Camera mount for Flip FPV Pro with 15 Degree Angle by Bosnianbill
...p the horizon in view during forward flight. 10" props and no props in view with wide angle setting on the gopro. not bad.
thingiverse
free
Eken H9 Camera 25 degrees FPV mount by ovisual
... camera that could be used to attach to a quadcopter frame using zip ties.
should be printed in tpu or similar flexible material.
thingiverse
free
Big Sony CCD FPV Cam Holder Lisam210 QAV 210 30 Degree Uptilit by Glasses8448
...verse
this fpv cam holder is specialy designed for big 33x33mm board cameras 600tvl 1/3 sony ccd with 27x27mm holes. uptilt: 30°
thingiverse
free
Sony Effio 700TVL FPV Camera Mount (28mm Hole Spacing) 15 degree and holes by Gecodestroy
...ture for my camera:
perfect fit for the lens adapt
holes for 10" nut
top hole for capacitor
15 degree from horizon to camera
thingiverse
free
45 degree Servo Mount / FPV camera pan mount by add1ct3dd
...going to cable tie it to the servo horn, but instead i used generous amounts of hot glue, it seems to bond to pla really well :).
thingiverse
free
FR7 20 Degree Gopro Hero 8 Mount with integrated FPV cam mount by newfla
...d fromhttps://www.thingiverse.com/thing:4550387https://www.thingiverse.com/thing:4703333https://www.thingiverse.com/thing:3895317
thingiverse
free
FPV Race Camera Mount - PZO 420M, 20 Degrees by Mauronic
...0420-m-600tvl-ir-blocked-ccd-camera-wdr-2-8mm/
required:
double stick tape
2 2m x 5m screws - they can be longer or shorter
thingiverse
free
mark4 dji fpv air unit's camera mount 25 degree remix by JCR06
...mount 25 degree remix by jcr06
thingiverse
just my design of a insta360 go camera mount for the diatone tinawhoop. super simple.
thingiverse
free
Squirt DJI FPV Cam Mount (5 Degree)
... my youtube and fb page!
https://www.youtube.com/channel/ucu0i38o4bdig8cqw6wcdscwhttps://www.facebook.com/groups/648627095605387/
thingiverse
free
Lumenier Charpu FPV Antenna holder 45 degrees by dansche
...e keeps down the antenna as well and there is no problem it gets into the props. in my case you see an antenna from tbs infiniti.
thingiverse
free
FPV Emax Buzz around 26 degree Gopro sesion, Runcam 3-5 by Meatballking
..., runcam 3-5 by meatballking
thingiverse
https://www.thingiverse.com/thing:4740386 remix from this one.
looks cool on the quad.
thingiverse
free
FPV Board camera 25 Degree Mount (Emax NightHawk 250) by RotorGator
...y broken lenses. it also reduces the amount of debris the props fling onto the lens as well.
prints in two pieces at 20% infill.
thingiverse
free
Mini mount_eachine_ef-01 fpv camera and 15 degree version. by Schiksie
...ounting holes 20 by 20 mm apart. also added a version ( v2) with space for a m3 nut but haven tested it myself to see if it fits.
thingiverse
free
H-King Color 250 camera mount fpv 30 degrees by NerOne1
...verse
supporto camera in posizione protetta su frame color250 con 30° di inclinazione .
2 fori e sedi per autobloccaggio dadi m3
thingiverse
free
Fpv Antenna 90 degree support holder by RareMutation
...old and secure onto the connector. the lid v2 that goes with this, can be printed upside down to eliminate the need for supports.
thingiverse
free
GoPro Hero9 Mount For Roma F5 FPV Drone - 15, 20, 25, 30 degrees by barontechnologies
...e mounts so you can match the angle of your fpv camera for best framing.
please leave a comment with any suggestions or comments.
thingiverse
free
FPV Board Camera 15 Degree Mount (Emax NightHawk 250) by RotorGator
...t of debris the props fling onto the lens as well. (wire management will be done in due time)
prints in two pieces at 20% infill.
thingiverse
free
3DFly with Spektrum FPV Camera (from NanoQX FPV) Mount w/ 15-Degree Tilt by djdiaz
... use some double sided tape to secure the camera to the mount. i used 3m vhb to mount the camera and the fc, and it works great!
thingiverse
free
FPV receiver for 360 degrees 6x diversity by JeWa
...ttps://www.thingiverse.com/thing:3207325 for the lcd display
more information -> https://gitlab.com/je2wa/diversityreceiver6x/
thingiverse
free
SourceOne 20 Degree Session Mount with Rear 19x19mm FPV Cam Mount
...ho like cheater quads. there is also a tube running up the back of the mount to run the wiring down for a nice concealed look. (:
thingiverse
free
GoPro Hero9 Mount For TBS Source One v4 FPV Drone - 15, 20, 25, 30 degrees by barontechnologies
...e mounts so you can match the angle of your fpv camera for best framing.
please leave a comment with any suggestions or comments.
thingiverse
free
800TVL Cam Mount for MHQ2 FPV Quad Copter with 15 degree decline angle by jamisonhodges
...giverse
fits 38mm x 38mm 800tvl camera with 28mm hole spacing. unit cam be glued to footer plate that sits in the two hex slots.
thingiverse
free
Space One FPV Formula One 220 X Edition 90 Degree Antenna Mount Plate by Mr_Disintegrator
... it on the bottom, although it just barely worked on my setup due to my led / buzzer board location. flex printing to the rescue!
thingiverse
free
GoPro Hero8 Mount For Roma F5 FPV Drone - 20, 25, 30 degrees by barontechnologies
... chat on itsblunty's live youtube this week.
feedback requested since i don't actually own this drone to print for myself
thingiverse
free
FPV Board Camera 25 Degree Mount - With Bumpers (Emax NightHawk 250) by RotorGator
...ny broken lenses. it also reduces the amount of debris the props fling onto the lens as well.
prints in two pieces at 20% infill.
thingiverse
free
Xiaomi Yi 25 degrees tilt for quad fpv by Chrono83
...9;t have the original design but since it was based on ayabaya design i had to give him credit for this nice idea...
thanks
enjoy
thingiverse
free
AIO FPV Camera Mount for Whoop Quadcopter (20 degrees, 20x20 holes, diagonal)
... you use low density about 20%. block supports in zip tie hole.
also you need 1 zip tie (up to 3mm wide) to fix camera inside it.
thingiverse
free
FPV FatShark 600TVL Holder for 250er mini-H Copter by merlin1031
...holder for 250er mini-h copter by merlin1031 thingiverse 10 degree fpv cam holder +++ 01. sep. 2015 +++ update:...
thingiverse
free
ZMR 250 FPV Plate 15º by surver
...plate 15º by surver thingiverse fpv plate with 15 degree and flange...
thingiverse
free
ZMR250 FPV camera mount by ronald85
...zmr250 fpv camera mount by ronald85 thingiverse a 50 degree fpv camera mount for the popular...
thingiverse
free
GoPro Hero Session FPV Mount for Flight Controller Dimensions(30.5x30.5mm) - 30 Degrees by T3hDon
...ifferent versions here with different amounts of space around the rear mounting holes, choose which one will fit your build best.
thingiverse
free
GoPro Hero 5 / 6 / 7 FPV Universal Mount V2! 30 Degree FULL COVERED (Nachos LOGO) by NachosFPV
...d a problem with superview settings, part of the mount was in the shot :(
this one is more lightweight and superview friendly! :d
thingiverse
free
FPV King XL7 Hero 7 Mount 15 Degrees by Orion36
... check out my freestyle you tube channel.
https://www.youtube.com/watch?v=c0wtfgpl_bg&list=plptxxojfwfivj00qd4werpzd00ornutky
thingiverse
free
Nighthawk 200 / 170 FPV Cam Holder 20, 30, 40 degrees - PZ0420M L28 by MBaumi
...uying stuff at banggood:http://banggood.com?p=430714520645201404s1
or send me some cents on paypal: https://paypal.me/mbaumeister
thingiverse
free
Fat shark degree holder by MABC
...fat shark degree holder by mabc thingiverse fat shark fpv camera at a 20 degree...
thingiverse
free
FPV FatShark 600TVL Holder for 250er mini-H Copter by merlin1031
...holder for 250er mini-h copter by merlin1031 thingiverse 15 degree fpv cam...
thingiverse
free
GoPro Hero 5 / 6 FPV Universal Mount 30 Degree FULL COVERED (Nachos LOGO) by NachosFPV
...e.com/thing:3111434
full cover gopro hero 5 , 6 and hero 2018. 30° mount!
print as third photo shows, print in tpu with supports!
thingiverse
free
25mm mount for DJ FPV Goggles (V1 & V2)(15 degree angled) by kamikazeframes
...: 4
infill: 30% grid
ironing: enabled
temps: 220°c & 70°c
fan-speeds: 0 at 1st layer, 20% idle, 45% max (2x 5015 fans in use)
thingiverse
free
600TVL 1.8mm CMOS FPV Camera case by Thewebmaster
...thewebmaster thingiverse camera case designed to fit this 170 degree fpv...
thingiverse
free
Runcam2 fpv mount by davypenn02
...runcam2 fpv mount for a 250 quad the 25 degree mount can be omitted if...
thingiverse
free
FPV Launchpad by fboneol
...designed it from scratch with an angle of 35 degree. ...
thingiverse
free
ZMR250 board camera swivel adjustable FPV by jturn217
...board camera swivel adjustable fpv by jturn217 thingiverse 25 degree swivel for fpv board camera. 32mm x...
thingiverse
free
600TVL FPV 170 Degree Wide Angle Camera 20 deg mount by Iamsadomaso
...ra and double sticky tape, or ca glue to mount it on frame or other surface. the microfone needs to be removed to fit this mount.
thingiverse
free
ZMR 250 Fatshark FPV camera mount by histo
...the zmr 250 quadcopter frame. update 04/13/15 added 10 degree and 15 degree...
thingiverse
free
360 degree Pan Tilt system for FPV head trackers by iPeel
...ve.
here's a video that has a couple of scenes of the mechanism in action on my multiplex tucan: https://youtu.be/pvkasvax3ks
thingiverse
free
Johny fpv frame Insta360 Hood Ornament by kevC9
...insta360go mount for a johny fpv astrox frame 25 degree. leave a...
thingiverse
free
ZMR 250 Fatshark 600tvl FPV cam mount with 15 degrees tilt by PapaTheCat
...ouldn't want it to fall off would you? lol)
here is a little video of it's first flight ;) https://youtu.be/kb5wo2fc2d0
thingiverse
free
HERO GOPRO SESSION 30 degree FPV MOUNT by clevis41
...is should be printed with some sort of flexi material as it fits tight like a rubber glove.
i believe i used 40% infill on my own
thingiverse
free
Martian 3 HS1177 30 Degree Mount by MajorDouche
...martian iii 30 degree mount for the foxeer hs1177 fpv ...
thingiverse
free
MARTIAN II MICRO 600TVL FPV CAM MOUNT by giek2000
...thingiverse martian ii series micro fpv cam mount. 40 degree ...
thingiverse
free
Diatone Grasshopper micro fpv cam mount by kristofera
...cam mount by kristofera thingiverse diatone grasshopper g160 20 degree camera mount for banggood micro fpv...
thingiverse
free
iFlight XL5, XL7 Antenna Mount. 45 degrees by hellfpv
...iflight xl5, xl7 antenna mount. 45 degrees by hellfpv
thingiverse
45 degrees fpv antenna mount for iflight xl5 or xl7 frames.
thingiverse
free
SpaceOne 220X 25 Degree Session Case by ROTORGARAGE
...case by rotorgarage thingiverse gopro session case for spaceone fpv formula 220x. 25 degree...
thingiverse
free
emax 250 nighthawk fpv camera plate by yenbadnosyt
...250 nighthawk fpv camera plate by yenbadnosyt thingiverse 15 degree tilt camera plate for emax 250 nighthawk and the...