thingiverse

free

Accelerometer Case by lakephall

...celerometer sensor face-down. the tabs on the side are meant to allow for half-inch hook and loop straps to hold down the sensor.

thingiverse

free

WIMUv3 Accelerometer Calibration Fixture by M_G

... be placed in a known position on the test apparatus to aid in the repeatable calibration of said accelerometer containing device

thingiverse

free

U-Bracket for GDX Accelerometer by vernier

...ernier thingiverse this bracket is used with the gdx accelerometer. this bracket is designed to be used with a 1/4-20 screw/nut.

thingiverse

free

3D printed MEMS accelerometer by adamweld

... the device was envisioned to be simple and easy to understand while using the same operating principles as a mems accelerometer.

thingiverse

free

Tube Plate for GDX accelerometer by vernier

...be plate is used to mount the gdx accelerometer. this plate (and the accompanying bracket) are designed around 1/4-20 fasteners.

thingiverse

free

Gyroscope / Accelerometer Mount by dgngdn

...ace by two nuts. the end is flexible so as to allow the mount to clip on a cylindrical object with outside diameter of about 8mm.

thingiverse

free

Box for gyro accelerometer board by robsteele

...by andy mark. it will require tapping 4 holes for #4 screws. the top parts has a hold for a 10-24 screw for holding the box down.

thingiverse

free

Donkeycar GY-521 accelerometer and gyro support

...his one:https://fr.aliexpress.com/item/1028067742.html probably not the best. need a super quiet (stable with no spike) power in.

thingiverse

free

Circular Motion Platform: Accelerometer Device 3D housing by SidiVerse

...erse this is the 3d housing for an accelerometer device (powered by arduino) that is used for a stem project on circular motion.

thingiverse

free

Accelerometer mount for bicycle by Nigel

...cceleration measurement of up to 6g. the only thing missing is a sturdy bracket to mount the accelerometer to the bike frame...

thingiverse

free

BITalino Accelerometer (ACC) Sensor Housing by BEE Very Creative by BITalinoWorld

...bitalino accelerometer (acc) sensor (http://www.bitalino.com) by andré magro from bee very creative (https://beeverycreative.com)

thingiverse

free

gesture controlled robot using accelerometer by berasukanta

...d www.facebook.com/learning arduino projects. and subscribe our channel to stay tuned with us and likes also..do comment in inbox

thingiverse

free

Support to calibrate accelerometer/gyroscope MPU6050 (GY-521) by Minguz

...yin to have the center of the sensor in the center of the support. at this point you can tilt it at 45/90 degree in the two axis.

thingiverse

free

Hypercube Evo Ngen - Support for ADXL345 Accelerometer sensor by bouffffi7

...nances.html acceleromter axis are not corresponding to printer axis, but according to klipper documentation this is not an issue.

thingiverse

free

Accelerometer Calibration Fixture for WIMUv3 by M_G

...er use increased internal hole size for slightly larger, tyndall printed wimuv3 packaging v 1.0 first attempt designed in autocad

thingiverse

free

Model of a gyro/accelerometer board (AM 2067) sold by Andy-Mark by robsteele

...accelerometer i created this model of the part. i modeled the pins as blocks, rather than pins, which i thought would just brake.

thingiverse

free

Mount for MinIMU-9 V2 , Accelerometer, and Compass (L3G4200D and LSM303DLM Carrier) by buwprinter

.... it fits in pretty tight but can also be fixed with an addional screw. prints just fine without support or raft 10% infill.

thingiverse

free

Longboard Pro Trinket + Accelerometer Mount by JoshuAc00k

...15): i have actually printed this version out and am using it for my project. it printed fine and nothing has sheared to snapped.

thingiverse

free

Rostock Max Accelerometer Board Mount for 713Maker Hotend by DodgeDerek

...ne. the part is held on to the hot end mount with the regular bolts for it and some 8mm m3 bolts to attach the board to the part.

thingiverse

free

LabRadar Accelerometer Trigger + Picatinny Mount by Obsessed

... petg, but i assume pla or pla+ would be plenty strong enough. the velcro strap bridge would certainly turn out better with pla.

thingiverse

free

Accelerometer brake controller by dbcoop

...and wiring diagrams to follow. this project is relatively inexpensive and versatile for everything from your atv to your bicycle.

thingiverse

free

Accelerometer Housing for GY-61 ADXL335 Accelerometer Analogue Board by bathrobotics

... maybe track this with a usb oscilloscope we have. that'll be sweet! all the best, eur ing andy southern bath robotics.

thingiverse

free

D1M BLOCK - ADXL345 (custom Accelerometer) block by IOT123

...ring, and 2 off 8 pin 10mm long needle female pin header strip are required for this build. instructions code examples d1m blocks

thingiverse

free

D1M BLOCK - GY521 (custom Gyroscope/Accelerometer) block by IOT123

...ring, and 2 off 8 pin 10mm long needle female pin header strip are required for this build. instructions code examples d1m blocks

thingiverse

free

Prometheus Mount for SeeMeCNC Rostock Ball Joint Platform +/- Accelerometer Option by slonold

...ive to the clamp plate like a clam shell. be sure to seat bowden tube and insert ptc retainer before mounting accelerometer board

thingiverse

free

self balancing robot using mpu6050 accelerometer by berasukanta

...get to subscribe in you tube and likes also.and do comment in inboxalao you follow in www.facebook.com/learning arduino projects.

thingiverse

free

Adafruit LIS3DH 2809 accelerometer mount for Caribou Bondtech BMG carriage by JenPet

...you print this mount). it is designed for the adafruit lis3dh 2809 accelerometer. you need 4x m2,5x10 screws and 2x m3x30 screws.

thingiverse

free

GY-61 ADXL335 Accelerometer Analogue Board Model (DON'T PRINT!) by bathrobotics

... can be found at:http://www.thingiverse.com/thing:662505 please don't waste filament printing this. -andy southern, ceng.

thingiverse

free

MoleBox: 3D accelerometer and 3D magnetometer LSM303DLHC by ToFe

... (adafruit's lsm303) lsm303dlhc data sheet (pdf) lsm303dlhc module (aliexpress)more info on e-mole molebox page (czech only).

thingiverse

free

WAV3_BOT Gauntlet by VigneshRajmohan

...wav3_bot gauntlet by vigneshrajmohan thingiverse wav3_bot is an accelerometer based robot that uses hand motions to control movement....

thingiverse

free

MPU 9250/6500 case by buildbysammie

...accelerometer case. this case is for the mpu 9250/6500 accelerometer it has graph axis arrows on its top side...

thingiverse

free

MPU6050 Joystick by filipeflop

...mpu6050 joystick by filipeflop thingiverse a joystick for mpu6050 accelerometer note: the fitting is not so perfect but it...

thingiverse

free

ArduinoAcceleromteterCase by lakephall

...use in tandem with an arduino with a custom accelerometer header for a pltw edd...

thingiverse

free

Voron v0 ADXL345 Mount by VBXNwi3mk3s

...(e3dv6, may also work for others) mount for adxl345 accelerometer used by klipper resonance measurement. (a.k.a. gy-291 https://ja.aliexpress.com/item/32831977529.html) compression...

thingiverse

free

Spring Joystick Head (slightly tilted) by RobinBa

...3d model for spring joystick head with space for accelerometer ...

thingiverse

free

F450 Top Platform Bracket by Reefwing

...by reefwing thingiverse a mounting bracket to allow a gyro/accelerometer to be mounted on the top bracket of an...

thingiverse

free

ADXL345 mount for Hypercube Evolution Fusion by LazaroFilm

...for hypercube evolution fusion by lazarofilm thingiverse mount the accelerometer to the top of the carriage to use with...

thingiverse

free

Whoop Calibration Platform by erkark

...angled usb cable so this is my solution for accelerometer ...

thingiverse

free

AX3 Watch fixation on dog collar by Klodeko

...collar by klodeko thingiverse fixation of an ax3 watch accelerometer (http://axivity.com/) on a dog collar of 23mm x...

thingiverse

free

Case for KX022-1020 from ROHM Sensor Evaluation Kit by jgromes

...sensor evaluation kit by jgromes thingiverse case for kx022-1020 accelerometer from the rohm sensor evaluation...

thingiverse

free

Ambasat2 Space flight simulator by pe1mew

...sprite satellite space-flight-simulator for software testing of the gyroscope, accelerometer magnetometer...

thingiverse

free

Gyro Stabilizer by sluddani

...print a stabilizer to go in a rocket. an accelerometer will sit in bottom and record height of...

thingiverse

free

Steering Wheel by tinkerkit

...project featured in the tinkerkit! video. just place the accelerometer module in the small hole in the...

thingiverse

free

ColorCube by ZGZMakerSpace

...zgzmakerspace thingiverse electronic dice which iluminates itself with an accelerometer in order to know the face on the top...

thingiverse

free

Tennis Racquet V2 by johntoth

...thingiverse concept tennis racquet v2 that could possibly hold accelerometer gyroscope, piezoelectric sensor at the top near the head...

thingiverse

free

Rocket capsule with parachute deployment mecanism by leoyanis

...model rocket casule/probe with parachute deplyment system using arduino accelerometer and a servo. yout need: arduino (smaller is better...

thingiverse

free

Crabby Cap Zesty Nimble SeeMeCNC HE280/Accelerometer Mount by slonold

... the ptfe tube should contact the bottom of the filament guide on centre without distortion. re-trim the ptfe tube if necessary.

thingiverse

free

Enchanted Thor Hammer by mvipin

...mjölnir with an additional enchantment using a touch of accelerometer a sprinkle of actuator and a few 3d printed...

thingiverse

free

RoaDuino 1.0 by Elraulito

...project uses an lcd of an old nokia, an accelerometer and a game made by me, just download everything...

thingiverse

free

Nimble Gnu - System to Adapt the Zesty Nimble Extruder to a Prometheus V2 Hotend Mounted to a SeeMeCNC Balljoint Effector Platform with Accelerometer Probe PCB by slonold

...ter, strap down the whip. remember to revisit your slicer retraction settings. it is a whole new world without the bowden tube.

thingiverse

free

Dodecahedral Protoboard by mrule

...proto-board piece : http://www.sparkfun.com/products/8847 ideas : dodecahedral lights-out interactive accelerometer controlled led object just assemble and gaze at its...

thingiverse

free

ADXL345 E3D V6 Nozzle Mount (optimized for Voron Afterburner) by tzeman

...(optimized for voron afterburner) by tzeman thingiverse adxl 345 accelerometer nozzle mount for e3d v6 hotends. optimized for voron...

thingiverse

free

MX MIDI Guitar

...making it feel like an electric guitar. using an accelerometer you can move the guitar to adjust modulation giving...

thingiverse

free

Phidget Cases by Razor2000

...controller servo controller 8x8x8 main board ir distance sensor accelerometer cases have been uploaded with both a screw mount...

thingiverse

free

MPU-6050 Pin Header Soldering Jig by seanhodgins

...thingiverse i had to solder headers on 100 mpu-6050 accelerometer so i quickly made this jig to hold them...

thingiverse

free

Robot Control Unit by ebaera

...of small humanoid robot (http://www.thingiverse.com/thing:789500) and space vehicles (http://www.thingiverse.com/thing:795088) gyro/accelerometergesture sensor/4 motor drivers/charger/8 rgb leds/bluetooth/atmaga328 are on...

thingiverse

free

VortexPro250 Cam_Skid by Oxyo

...protection for vortex pro 250 + calibrate support(9mm) for accelerometer calibration, 7mm deeper to protect my cam connector like...

thingiverse

free

HE280 cable locking clip by mattster98

...harness by using the screws that hold the he280 accelerometer board down. not a true remix, but the original...

thingiverse

free

Rostock Max V3 - E3D Hotend Platform by Terefenko

...the assembly instructions pdf, i use the stock he280 accelerometer cover, but i actually prefer this accelerometer cover. i...

thingiverse

free

BodWiiRius FPV Quadcopter by Ilkirius

...receiver and satellite functions : mode stable with : accelerometer gyroscope altimeter magnetometer gps : $ return to home...

thingiverse

free

Decked out Rocket (video added) by sluddani

...height. fits a c-class engine. uses an adxl 345 accelerometer ran by an arduino pro mini and a 3.7v...

thingiverse

free

PixelXLtemplate by ShuttleSpace

...head. https://3dorchard.com/app/single/58a858c6a2717f0d618f940d/58a85a45a2717f0d618f9412 view this on your android, uses the accelerometer new...

thingiverse

free

Diatone Crusader GT2 200 by sharpshooter441

...control board level if you need to level your accelerometer stand also helps to store it on. hope you...

thingiverse

free

Voron V0 ADXL345 mount by smolboi

...by smolboi thingiverse front fan mount for the adxl345 accelerometer works with the threaded v6, dragon and my nf...

thingiverse

free

ADXL345_mount by jpndk

...- longer screws may be needed. i got my accelerometer here:https://www.ebay.com/itm/1pcs-gy-291-adxl345-iic-spi-module-free-shipping/283911472614...

thingiverse

free

Helmet Shell Version 2 by egzastrow

...for the wires to be fed through from the accelerometer that is in the helmet to the arduino in...

thingiverse

free

Xiaomi Yi Gimbal Mount by ahuddart

...be compatible . imu mount for use with mpu-6050 accelerometer ...

thingiverse

free

Persitance of Vision Display Case

...is meant to hold a 10 led strip, adxl335 accelerometer 9v battery, and an arduino uno. see the full...

thingiverse

free

Interactive Lighted Companion Cube by MachineKing

...an arduino micro, a 12v psu and a 6dof accelerometer and gyroscope combination. here is a video of it...

thingiverse

free

Arduino Nano RC Transmitter by AlxUta

...switches six buttons ( two from the joysticks ) accelerometer and a gyroscope...

thingiverse

free

ADXL345 bracket for Ender gantry by MathiasM74

...mathiasm74 thingiverse a bracket for mounting an adxl345 thee-axis accelerometer on the ender x-axis gantry. used to calibrate input...

thingiverse

free

Mini naze cover by ixxe

...so i made a smaller case. fits this bord onlyhttp://www.banggood.com/openpilot-mini-naze32-flight-controller-6dof-stm32-32-bit-with-cortex-m3-cpu-mpu6050-accelerometerp-1017486.html different tops covers for angled and straight pins. tell...

thingiverse

free

65mm Quad work/launch stand

...usb cable in while also holding it level for accelerometer calibration. it is too slippery to use as a...

thingiverse

free

WunderBar 3D printable casing by relayr

...include: light, color, distance, temperature, humidity, remote control (ir), accelerometer and gyroscope, a grove connector, and one public sensor...

thingiverse

free

ADXL345 mount for Flsun Q5 Klipper calibration by alexeyzel

...that i use on my flsun q5 printer. the accelerometer axis are aligned with the printer axis. printed flat...

thingiverse

free

Adafruit Stemma QT sensor case by Lubarb

...the tlv493 triple-axis magnetometer board and the lis3dh triple-axis accelerometer breakout. since these are the same size it seems...

thingiverse

free

Arduino Shield Case for ROHM Sensor Evaluation Kit by jgromes

...the case togeher.to improve the stability of sensors like accelerometer or magnetometer, each of the sensors can also be...

thingiverse

free

Biped Robot Mk II by pablocawen

...pca9685 16ch pwm motor driver hc-05 bluetooth module mpu6050 accelerometer and gyroscope e-max es08mdii watch:https://youtu.be/8atsvegm6xkhttps://youtu.be/_6-xyamqeb0 if you like the...

thingiverse

free

3DR Solo Legs by lanceb

...3dr solo legs by lanceb thingiverse (3/19/18 updated accelerometer leg) another leg variation..i like this one better. might...

thingiverse

free

Light satellite antenna rotator for camera stand by jsalin

...to a satellite of choice automatically, using gps and accelerometer ...

thingiverse

free

Small Humanoid Robot by ebaera

...3d printed arduino humanoid robot. round control board has gyro/accelerometergesture sensor/4 motor drivers/charger/8 rgb leds/bluetooth with atmaga328. it shows...

thingiverse

free

ADXL345 Adapter for Remixed Tech2C E3Dv6 Mount Clamp Remix by adolson

...just a simple little adapter for mounting the adxl345 accelerometer to my remix of xsinx's remix of tech2c's e3dv6...

thingiverse

free

LED Matrix Sand Toy by adafruit

...grains of sand which are driven by sampling an accelerometer with raspberry pi zero! the 3d printed handles make...

thingiverse

free

Caterpillar robot by larmesto

...app for remote controlling the robot with the device accelerometer developed with appinventor2). in spanish:http://robotica.webs.upv.es/es/diseno-de-un-robot-oruga-imprimible/ in english:http://robotica.webs.upv.es/en/design-of-a-printable-caterpillar-robot/...

thingiverse

free

E3D V6 Hotend Mount for Rostock Max V3 & Orion Deltas by Resinseer

...the he280 hotend, particularly the pcb that houses the accelerometer which now comes as standard in both printers. apart...

thingiverse

free

GY-521 hand worn enclosure by izash

...part of my fascination with sensors, i built an accelerometergyroscope based controller for modular synths that outputs 3 cv...

thingiverse

free

ADXL345 mount for Artillery Genius / Sidewinder X1 by aapalo

...sidewinder x1 by aapalo thingiverse mount for the adxl345 accelerometer attach to a ribbon cable strain relief with two...

thingiverse

free

Motor levelling mounts for Banggood Falcon 250/Pro by AndrewFromOz

...you have done this, you'll need to recalibrate the accelerometer for the new level flight. there are tutorials for...

thingiverse

free

Rostock Max V3 LED ring mounts by Noircogi

...open + and - 12v solder point on the accelerometer board. they are on either side of one of...

thingiverse

free

Arduino Mini BMO by electronhacks

...electronhacks thingiverse a working bmo robot complete with arduino, accelerometer distance sensor, buttons, and audio playback. i have been...

thingiverse

free

Balancing robot with etched PCB shield by JDD

...if your making the pcb and using a different accelerometer board, make sure to check the pins. they're probably...

thingiverse

free

Raspberry Pi Tablet

...and provides an audio jack for headphones. accelerometer: mpu-6050 gyro/accelerometer - to orientate the screen. (with python) cooling: fan...

thingiverse

free

Automatic Bike Brake Light by ChPech

...controls brightness for normal operation and braking state. the accelerometer is polled at 2khz then accumulated to 10hz and...

thingiverse

free

Tarot Gimbal Board Covers by Jonesmg1

...through the holes in the gimble controller. the small accelerometer board cover has 4 tabs for 2 sided adhesive...

thingiverse

free

Logitech C920 Webcam Solar Tracker Mount and Cover by stusona

...sparkfun adxl345 breakout board so you can have some accelerometer ...

thingiverse

free

RGB Matrix Pixel Sand by adafruit

...and the esp32. it also has an on-board lis3dh accelerometer with the stemma qt connector it can work with...

thingiverse

free

Digital Spirit Level by boztopuz

...cable 1 x on/off switch button 1 x mpu6050 accelerometer 1 x 0.91" i2c screen 1 x prototype board...

thingiverse

free

HoverDrone by Deanasawr

...build requires: 1x arduino nano 1x bluetooth module 1x accelerometergyroscope module 2x micro servos 2x esc (motor controller) 1x...

thingiverse

free

Star Trek Combadge - Circuit Playground by adafruit

...tapped, it'll make the "chirp" sound effect! the on-board accelerometer can sense being tapped, triggering a sound to the...

thingiverse

free

Glint Pilots by tinkergen

...programmable rgb leds, a center pushbutton & built in accelerometer the shape design of glint is inspired by a...

thingiverse

free

LED Rocket by eric_hcr80

...arduino driving a couple of leds and uses an accelerometer to vary the colors of the lights with the...

thingiverse

free

Wheelie Skid Plate for Robot Vacuum CRL-200, Conga 3090, LDS M6, Navi 1030

...to bounce and wheelie high enough for the onboard gyro/accelerometer to trigger an obstacle avoidance maneuver every time. by...

thingiverse

free

Self Balancing Robot Project (work in progress) by daemonz144

...for a stabilization and controlling motors mpu-9250 gyroscope + accelerometer + magnetic field a4988 stepper motor driver raspberry pi...

thingiverse

free

3D Cube LED 8x8x6 by hpsaturn

...main board: esp32 ttgo mini6 led panels 8x83 axis accelerometer imu [untested]qi wireless charger receiver[untested] source code the current...

thingiverse

free

Improved E3D V6 Hotend Mount for Rostock Max V3 & Orion Deltas by Resinseer

...stock he280 hotend, particularly the pcb that houses the accelerometer which now comes as standard in both printers. apart...

thingiverse

free

STM32 "Blue Pill" Mount for 2040 Extrusions by clearchris

...as a secondary board in klipper to run an accelerometer no supports required. i printed in petg, but should...

thingiverse

free

Homebrew Hydrometer by brendonbuilds

...to convert the angle to specific gravity. bom: adxl345 accelerometer https://www.amazon.com/gp/b0151fibzo huzzah esp8266: https://www.amazon.com/dp/b0131v0wyi 18650 battery holder: https://www.mouser.com/productdetail/534-1043 petg...

thingiverse

free

OpenAstroTracker IMU & GPS Support by fiorucci

...support by fiorucci thingiverse this is a gps and accelerometer holder for the openastrotracker project. it is suitable for...

thingiverse

free

Key of Aaravos - illuminated working prop

...translucent opening for the rune in each face. an accelerometer and capsense board are used to determine which side...

thingiverse

free

Minecraft Nightlight by dparrish

...built for my daughter. built around an arduino with accelerometer to detect when it's picked up, and leds for...

thingiverse

free

IcosaLEDron: A Multi LED Smart Ball by AfritLabs

...known as neopixels) positioned equally around, and a 3-axis accelerometer the icosaledron is a spherical platform for creating light...

thingiverse

free

DIY Balancing Robot by 3Dadicto

...units drv8825 drivers 2 nema17 stepper motor units mpu6050 accelerometer hc-05 bluetooth module 3 units 3.7v 18650 batteries 2...

thingiverse

free

Compact 2 Axis GoPro Gimbal by Paralluminati

...** this version has a holder for the mpu6050 accelerometer which is typically standard with the alexmos...

thingiverse

free

Parametric Gimbal, prints already assembled by Bluebie

...to place, creating a fairly effective gravitovectometer (like an accelerometer but only gives you a vector, not a rate,...

thingiverse

free

Vogal the Dragon by TheRat

...will eventually be replaced with ir sensors and an accelerometer but i'm still working on those baby steps. the...

thingiverse

free

VertiBOT by MAF

...is provided by an imu 6dof composed by an accelerometer and a gyro. one atmega 328 microcontroller execute the...

thingiverse

free

Iphone8 plus holder vixen dovetail by pallol

...the mount which interfered with the phones compass, gyro, accelerometer abilities. i initially used the dslr dovetail from here...

thingiverse

free

Anycubic Kossel ADXL345 Effector Mount by Qwuille

...more ease. it is for the blue 8pin noname accelerometer found on most sites. documentation for wiring and such...

thingiverse

free

Voron Afterburner Galileo Bl Touch Ender 3 by tzeman

...clockwork mount plate for creality ender 3/cr printers with accelerometer (adxl345 or similar) mount bowden mount for afterburnerhttps://www.thingiverse.com/thing:4756923 use...

thingiverse

free

Rostock Max Dual HE280 by Turpinator

...chance i need it. as is, you lose the accelerometer board, so... its not really a good idea. maybe...