thingiverse

free

SSD Stackers - 2.5" HDDs work too! (Previously "Dual SSD Stackers") by ryang3d

...widehole version) myself, and i'm pleased to say it works great! i only had spare 2.5" hdds laying around...

thingiverse

free

Sabrent ROCKET XTRM SSD Holder For Macbook Air and Pro by techkhamun

...3 external ssd. this is an ssd holder that works great with the macbook pro and macbook air. comes...

thingiverse

free

Lenovo T410 SSD Spacer by layrshift

...is spacer to make the ssd fit. slides right in place. should work in all models though. printed with foodsafe 3dk.berlin filament

thingiverse

free

Portable SSD Holder (SanDisk)

...39;t want to have the ssd just hanging there this enables me to just always strap it on the back of the laptop and keep it there.

thingiverse

free

32 Ford Hotrod Battery Tray for SSD TrailKing by BigPercy

...ercy thingiverse battery tray for ssd trailking 32 ford hotrod conversion worked great for me, hopefully useful for others also

thingiverse

free

Samsung T5 SSD holder by blockarchitech

...complete printing because i ran out of filament, but works ...

thingiverse

free

Adapter SSD 2.5" to HDD 3.5" tray for Supermicro servers by Strn72

...quot; in supermicro servers. tested. working. ssd targeted to sata-socket, thats ok. may be need to increase some holes by drill.

thingiverse

free

SSD rails for 7mm to 9.5mm ThinkPad T420 by dmiracle

...e for fitting a 7 mm ssd drive into the 9.5 mm slot on a thinkpad t420. might work for other laptops, but hasn't been tested.

thingiverse

free

5 SSD holder by garfi3ld

...than it most likely needs to be but it works ...

thingiverse

free

SSD cradle for EMU e4/64/ultra sampler by VengTheVader

...e6400 sampler using a separate scsi to sata bridge (works a treat). in theory will work with the ultras...

thingiverse

free

7mm SSD case for StarTech SATA to USB adapter by RedTopper

...to usb adapter into a portable, external media device! works well for media, clumsy folks who don't want to...

thingiverse

free

Sabrent SSD case by Xarib

...ittle bit the corners of the case. if the ssd is too lose take a piece of paper and fold it once or twice and put it in the case.

thingiverse

free

SSD Trail King Exhaust Headers

...e is tight and all bodies will be a bit different. i believe the aluminum shock towers from ssd are required so these will clear.

thingiverse

free

SSD Tray for HP Z840 by mcthon

...use double sided faces to mount it as the hole are misaligned from the drive. overall work great and no need to buy a hd from hp.

thingiverse

free

Fake SSD for Phanteks cases by Polypropylen

...e looking in that position i made this 3d model. should work for any ssd mounting thing that uses the same layout of the cutouts.

thingiverse

free

SSD holder for Malolo's Pi4 case (Raspberry Pi 4) by tedder

...clips to hold a ssd with your raspberry pi. works vertically or horizontally. clips can be moved to give...

thingiverse

free

XBox One 2Tb External SSD Side Holder by SilverSkullJS

...place flesh with the top of the xbox. this works best on a dresser or desk with flat sides....

thingiverse

free

SSD Adapter by Engineering_Aesthetics

...ell clip in trays as seen in the photo above. it will fit any 3.5" hard drive tray that uses the standard side mount holes.

thingiverse

free

SSD Adapter for Lenovo TS130 Series by hemocyanin

...end where the cables are plugged in. but this works and it is obviously a really niche sort of...

thingiverse

free

Samsung T7 SSD Laptop Bracket by Bluetopia

...is allocated for the fit on the monitor. it works well with an asus zenbook 15. two clips are...

thingiverse

free

2.5" to 3.5" SSD Mounting Adapter

...2+. this was specifically designed for a hp z420 worksation but should work with any...

thingiverse

free

Samsung 960GB SSD tray by firemandave6024

...s will need something similar. it is labeled for ease of organization. i also have a 1tb version for samsung's consumer line.

thingiverse

free

Samsung 1TB SSD tray by firemandave6024

...ll need something similar. it is labeled for ease of organization. i also have a 960gb version for samsung's enterprise line.

thingiverse

free

3.5" mount for an SSD by McQuacky

...so you might have to adjust a little but works ...

thingiverse

free

PI-4 with SSD case by afleak

...rent usb and ethernet port configuration of the 3. if you print the box in a vertical orientation, support structures are needed.

thingiverse

free

3.5" HDD SSD Disk Rail Mount by Anhixus

...adaptor found here on thingiverse, so i redesigned my original one. should work with most adaptors and 3.5" hdd/sshd drives.

thingiverse

free

PiRack SSD - Pi4 Bay Holes by ggrzad01

...the freecad format. compatability the pi 4 bay piece works with the following: raspberry pi 4 + heat sync...

thingiverse

free

SSD Trail King LC70 body mounts by HumboldtEF

...ml this is intended for experienced builders and will require you to do some diy work, dont expect me to change anything for you.

thingiverse

free

Raspberry Pi mount for SSD by nhchiu

...for the document:https://cad.onshape.com/documents/4fb0b117c46b1da221f90aec/w/412f5ccbf00fc3e28ff3a7c9/e/42b29afcfab18d313d0ae016

thingiverse

free

3.5 to SSD adapter for iMac by ramai

...s smaller than a 3.5" drive. this could work for other computers, but it's setup so the cables reach the ssd in an imac.

thingiverse

free

SSD adapter into HP/DELL/IBM HDD tray by glucz

... in a hp z600, but the z400 and z800 uses the same tray. it should work in any tray that connects the drive to a fixed backplane.

thingiverse

free

HDD/SSD bracket 2.5" to 3.5" by xerxes13

...3.5" by xerxes13 thingiverse printed few of this in pla, worked great. holes are made for m3 screws. uses about 10g of pla.

thingiverse

free

SSD Mounting tray for 3.5 inch PC Slot

...with customizing it. suggestions are gleefully accepted. if this works for you, post a...

thingiverse

free

Minimized SSD 2.5 to 3.5 adapter by jepler

...hdd in the photo, not an ssd. it still works ...

thingiverse

free

3.5 HDD to 2.5 HDD/SSD drive adapter

...u to mount a 2.5 inch drive in a 3.5 inch drive bay. this was designed to work with the tool less bays but will work with either

thingiverse

free

SSD iMac Bracket by Root_ish

...ll the hard work. i only removed the spacing in the middle to shave off some print time.https://www.thingiverse.com/thing:2912746

thingiverse

free

SSD 2.5" to 3.5" adapter by rssalerno

...ve a smoother look & feel. clean the holes with a #32 drill if necessary. this adapter will work in any mounting situation.

thingiverse

free

HP Z800 SSD Adapter Carrier Caddy 2.5 to 3.5 by Drzzt

...fixed the first hole with a screw and it works you have to look that the ssd is not...

thingiverse

free

Raspberry Pi 4 + Fan + SSD Tray 1U Rackmount by lufton

...tional) sata iii to usb 3.0 adapter usb 3.0 90° extension cord (turn down) m2.5x30mm screws raspberry pi 4 kingdian 2.5" ssd

thingiverse

free

Thinkpad T400 disk caddy by zbrozek

...eets for dimensions) i now understand why lenovo flipped the disk over in the t410 - disk thickness isn't strictly specified.

thingiverse

free

External SSD Enclosure by Mike_Dawson

...an edit all you want. the ssd cutout was made with a font located : http://www.fontpalace.com/font-details/7th+service+condensed/

thingiverse

free

Mac Pro 3.1 SSD adaptor by gmesqui

...destroy it. i've built and installed the adaptor, it works as intended. thanks guys for your...

thingiverse

free

Phanteks SSD Bracket (For Enthoo Pro Mid PC case and others) by lycrake

...and print my own. printed and tested and it works perfectly. fit is a little tight (done deliberately!) may...

thingiverse

free

Atomos Drive Caddy by jonmatifa

...s is my attempt to build a 3d printable drive caddy for atomos ssd recorders, i am modeling this off the one from my ninja blade.

thingiverse

free

Parametric buckle by ssd

...not the most efficient or strong buckle, but it works update: added a version of the buckle that was...

thingiverse

free

RAMPS 1.4 Twin 40mm fan mounting plate by raprep

...1.4 twin 40mm fan mounting plate by raprep thingiverse works along with http://www.thingiverse.com/thing:141525 using the mounting holes for the...

thingiverse

free

Phanteks Enthoo dual SSD brackets by Pennybags

...other than the pro, let me know how it works out with clearances and mounting locations so i can...

thingiverse

free

Atomos AtomX SSD Dock by u4142020

...of place when removing the drive. the dock has tab rails that keep the drive parallel to the sata connector to prevent damage.

thingiverse

free

SD/microSD/CFast 2.0/SSD Magnetic Holders by jakkuh_t

... in the thumbnail. the tolerances for all of them are fairly large as they were designed very quick and dirty, but they work fine

thingiverse

free

GPD-WIN 2 2280 2242 converter cover panel by ciphray

...n combining it with my ssd door print, though i may just keep it as is to be attached via a carbon fiber skin or some other means

thingiverse

free

2u 10 inch rack Mini-itx more SSD, stackable cooling rework by EmpirePhoenix

...a third can be added) the sides are compatible with the original case as well, so if you need more mounts this would work as well

thingiverse

free

Simple, compact SSD to 3.5" bay adapter by pruckelshaus

...ount in a drive bay, but it will work with just 1. has a slot for 7mm drives and 9.5mm drives. autodesk inventor file included.

thingiverse

free

raspberry pi zero 2,5" HDD/SSD Mount by Dennop1243

...no way to attach the pi zero in the pc i have constructed him this mount.i will still design a 2nd version of the 2.5" mount

thingiverse

free

2.5" SSD Secure Storage Rack by wuddadid

...ry wrong if you try to(especially the locking mechanism which is enclosed behind the front panel with the "lock" on it.

thingiverse

free

3.5 to 2.5 drive caddy with connector locations preserved by garethwestwood

...tested it on my hp g6 servers and it works great for putting 2.5 inch sff ssd's into a...

thingiverse

free

Flexible external SSD Case by nigelayres

...n flexible filament so that it would better protect the drive. i printed this in ninjaflex- which took ages but worked perfectly.

thingiverse

free

raspberry pi zero 2,5" HDD/SSD Mount by Dennop1243

...ach the pi zero in the pc i have constructed him this mount. there is still a 2nd version for another type of 2.5 "recording

thingiverse

free

2.5in-to-3.5in bottom-mount adapter by kitlaan

...at mount drives via the bottom holes, then the 2.5"-to-3.5" adapters that come with your ssd probably don't work...

thingiverse

free

1U Rack Case(Mini ITX, 2.5" SSD) by laptopdude90

... i've done a test print, in 6 pieces, and i fixed the problems i found. so it should work perfectly now, but no guarantees.

thingiverse

free

Low profile PCI SSD bracket - reversed by andrewzona

...ith the top/side of the same riser. screw reliefs are currently too shallow. may not work if risers are surrounded by capacitors.

thingiverse

free

Double 2.5" disk bracket by onmeow

...ld hp chassi so i created this adapter. printed it quite fast and hot in petg but pla will work as well. you will need 12 5mm m3s

thingiverse

free

GPD-WIN 2 SSD Door by ciphray

...ended to combine with a 2280 adapter, but still working on that part of it, it fits on with the original screw. made in tinkercad

thingiverse

free

Samsung T3 Stand by jremar

... 0.4mm should work fine too, as the little posts that keep the drive secured can flex a little (at least when printed with petg).

thingiverse

free

Universal Adapter HDD 2.5> 3.5 by Clax

...d 3.5. in my case it served to upgrade to ssd. the side holes are in the same position hdds 3.5, so it should work with most pcs.

thingiverse

free

Element Enduro SSD Front Bumper Mount

...nduro mount. the older has a wide flat surface for mounting electronics on. both have the center pass-through for the winch line.

thingiverse

free

Mini ITX Case

...n added for nas usage in back case using 2 trays holding 3 hard drives each. items that still need work: working on gpu support

thingiverse

free

HDD Caddy 1-4 SSDs to 5.25 bay by TRENDi77

....2 mm layer hight. 10-15% infill. pla for caddy. pla or abs for front panels. if you like my work, donate on my web site, please.

thingiverse

free

Tool Free 2.5" to 3.5" HDD/SSD Adaptor Mount ABS by TBRIshtar

...flow and tapered fittings so nothing's loose or vibrates around. second picture just to illustrate the actual printed part.

thingiverse

free

Home Assistant ESPHome Raspberry Pi tower case by glmnet

...meant to go bottom, it's not very stable but works well optionally you can print the base, it can...

thingiverse

free

HP Prodesk Mini Mods Hacks Fan Cool (600 G4) by qwksilver

...a 4k tv as a drafting station. the machine works well but runs hot. especially with 2 ssd/nvme and...

thingiverse

free

KUBEEK - The Raspberry PI game console and computer by Kubeetus

...ons. it will cost around 200 $ including filament!!! be patient and soon you'll have all the instructions and the full bom ;)

thingiverse

free

XPS 13 9370 Clip on Samsung T5 Holder by 4lon

... are for a phone holder but i'm currently working on a version two that is more minimalist and has the phone holder included.

thingiverse

free

2.5" to 3.5" adaptor for sata backplanes by mzandrew

...the top to capture 2 more mounting holes. either works ...

thingiverse

free

HP MicroServer Gen8 Additional 2.5" Mount (SSD/HDD) by h0ly0ne

...is currently tested in my own microserver - currently works quite well for ssd drives. used some m3 counter...

thingiverse

free

Basic Raspberry PI NAS Box/Case by nikl4s

...an opportunity to relearn modelling in blender but it works :) warnings: layers are only loosely stacked on top...

thingiverse

free

Geoffs mSATA to SATA adapter by geoff_cohen

...ot glue to hold the ssd in place. printed with a 0.3mm nozzle - you may need to scale yours slightly for a different nozzle size.

thingiverse

free

Axis Tensioner - X axis by MakerBlock

...3 has a slight change suggested by ssd which may help some people. if you're trying this for the first time, use version 2.

thingiverse

free

Apple iMac 2009 2010 2011 2012 21.5" 27" Universal SSD Caddy by Borntrippy

...are using a hdd use both parts ps pla works just fine, use supports from bottom of build plate...

thingiverse

free

PC Testbench for ATX and MATX by Im_Aesthetic

...sd. i made clips as well for extra support but havent printed those yet as the screws are working well. printed on my ender 3 pro

thingiverse

free

7mm 2.5" HDD/SSD Mount for PCEngines APU2

...se copyright (c) 2020 s3lph this thing is licensed under the terms of cc by-sa 4.0https://creativecommons.org/licenses/by-sa/4.0/

thingiverse

free

Dell Optiplex 760 SSD Caddy by DavidDeeds

...ly (common industry accepted standard on hole spacing) so other brands of ssd's will be fine. i hope this helps someone else!

thingiverse

free

SSD Mount by jrwells

...de a stand-off and match the depth of the mounting pegs in my chassis - you could leave them off, or adjust their height to suit.

thingiverse

free

Raspberry Pi Smraza Case to 2.5" SSD Adapter

...d a lot of fun making this. let me know in the comments if you'd like me to make you a custom version to fit your case/drive.

thingiverse

free

Magnetic SSD support by Jarounet

...ht direction. please note that installing this system in a pc that also contains one or more mechanical disks is not recommended.

thingiverse

free

Skull Knob by schlem

...k. this shrunken head was derived from "cleaned skull" by ssd. i added little round eyeballs in the orbits. zoinks!

thingiverse

free

Raspberry Pi 4 Server Case by Papiertiger

... and cut very carefully m3 threads i printed it from pla and used a 3-phase thread drill, maybe it`s better to use petg have fun!

thingiverse

free

2.5-inch to 3.5-inch SSD/hard drive converter by Mehiradev

...if you found this useful, please donate what you think it is worth to my paypal.me. help cover the time of design. thanks, enjoy!

thingiverse

free

dremel foot by ssd

...into the slot in the base of a dremel worksation (220-01). this might help stabilize a work piece. i...

thingiverse

free

Raspberry Pi 4 Microserver (Concept) by Multimedia4Linux

...cool the raspberry pi 4. the casing should also works with the suptronics x872 m.2 nvme ssd shield. initial...

thingiverse

free

SSD 2.5 to 3.5 Full adjusted for OEM by DC010

...ath to give some support for bottom mounted screws. if i run into a situation where i need 100% flush, i'll make another one.

thingiverse

free

3.5" to 2.5" Hard Drive Bracket by deeek777

...eel screw-to-expand insert for plastic (p/n: 92394a113 at mcmaster) in the larger holes so that you have something to screw into.

thingiverse

free

Intel MinnowBoard Max PCI-E case by paulcox

... size pci-express board (currently tested to work with humusoft and vector informatik boards). full bill of materials upcoming...

thingiverse

free

Nuc NVME 40x40mm fan mod by dukenuking

... screws to mount the 40x40x10 fan (12v) 40x40x10mm 12v fan bottom cover = 10% infill middle_screws = 50% infill feet = 50% infill

thingiverse

free

Small Size Rack for Raspberry PI, NAS, IOT, HDD, SSD and more by TimPeter

... but not tested) mounting brackets for normal 2.5 hdds and ssds if you have any questions or suggestions please use the comments.

thingiverse

free

Raspberry Pi 4 model B Omen Case by diogoquina

...by diogoquina thingiverse everywhere you can find me:https://www.instagram.com/quinadiogo compatibility works with the following raspberry pi models: raspberry pi 4...

thingiverse

free

Extender for Icy Box IB-189U3 M.2-enclosure (+F3D)

... tight tolerances, fdm might need some work with a file. f3d-file included, in case you need to adjust according to your own ssd.

thingiverse

free

Ncase M1 - EK D5 Pump/Res Mount by wywywywy

...mp bracket, with four m4 screws slot the entire assembly to the front frame of the case, where the internal ssd is supposed to go

thingiverse

free

Raspberry Pi 4 Flirc and SSD enclosure by Zapdos

...terial being printed and having to be removed. no other supports were needed in the print. hope this will be of good use to you.

thingiverse

free

Support Double HDD TV Common Interface 5V by cerfalois

...ip. there has been a lot of design work and test printing so do not hesitate to support me by leaving a i like and why not a tip.

thingiverse

free

2.5 inch drive tray (CUSTOM MOUNT HOLES) v1.0

...ne) build plate adhesion: brim for abs / none needed for pla supports: no resolution: 0.2mm infill: 70% (it will work with less)

thingiverse

free

Vertical Holder for M.2 Sabrent Rocket NVMe (X299-E board) by ResonantRoseWraps

...for the 2ndary slot but i lost mine, this works and lines up properly. at least should, can fix...

thingiverse

free

Tool Holder Multi by trevor524

...pens, etc. has a tape holder on the side. works well on a tool bench to hold smaller tools...

thingiverse

free

Universal 2.5 HDD holder by grepaly

...tors are slightly displaced from the standard position. tested and working in an hp desktop, a fujitsu siemens and in some imacs.

thingiverse

free

Extra Bracket Parts for ThermalTake Core X9 case (140mm fan) by Amphetamine

...of uv reactive white>blue pla. all prints sliced in simplify 3d with default wanhao settings and printed on my wanhao i3 plus.

thingiverse

free

SSD 2.5" Mounting Plate by RunnerPack

...), anyway. i may get a shorter usata converter and redesign the plate. i may also switch to pla, which doesn't warp as badly.

thingiverse

free

3.5 inch front panel SSD hotswap pull-out trayless adaptor by Dimbit

...till trying to think of an elegant way to make an eject mechanism, but for now i'm making do with a piece of tape to pull on.

thingiverse

free

Odroid-H2+ to Mini-ITX Adapter by jarpatus

...odroid-h2+ to mini-itx adapter including 2.5" ssd adapter. probably works with non-plus as well. created this due to clearance...

thingiverse

free

DIN-Rail Adapter for Raspberry Pi 4 Case by SamWhiskey

... used as well. the spring for the snapper should be printed in tpu. i used das filament tpu v2 which has a shore hardness of 94a.

thingiverse

free

Ender 3 case for Raspberry Pi + X850 V3 mSATA SSD Shield by HoM3r17

...if there is anything i should change, but it works well for me :) ################################################################## voici ma première chose...

thingiverse

free

Sega Saturn SATA tray mount by damcoole

...rive. should work with any standard thin 2.5" hdd or ssd. some thicker drives will not allow the lid of the saturn to close.

thingiverse

free

Invisible 2.5 Inch Hard Drive Wall Mount by natpie

...;ve printed this in pla using .1 layer heights and the threads work surprisingly well even though they were printed horizontally.

thingiverse

free

Parametric thumb nut by ssd

...of finger holes can be adjusted, etc... the model works well with 3, 4, and 5 wings. more wings...

thingiverse

free

small pillbox with sliding lid by ssd

...need some work so that the adjusted box always works some of the walls may be thicker than necessary....

thingiverse

free

2.5" HDD silencer for BeQuiet Silentbase 601 HDD Cage

...but for 3.5" drives in a common 5.25" slot. works only with bequiet (silentbase) hard drive cages! see my...

thingiverse

free

HP Z1 Dual 2.5" HDD/SSD SATA Caddy

...eye. beware: adding solid.stl only for imagination how all works please do mind that it's broken. beware: top hdd/ssd...

thingiverse

free

Elvis recleaned Skull by ssd

...thing but verify if the files are ok and reorient the faces. i've been manually cleaning them up in blender, but it is slow.

thingiverse

free

Macpie by bolmen

...small desktop computer running ubuntu 64 bit linux. cooling works nicely on my overclocked pi (2 ghz). even under...

thingiverse

free

Raspberry Pi 4 & Samsung T5 SSD = Extreme Fast Pi --> cached read 7.2GBit/s :D (with instructions)

...y damage your pi. happend 3 times to me now. you can fix the pi to the case with some rubber band or the hair tie of your sister.

thingiverse

free

2 x 2.5" HDD in 3.5" Bay by McCallum99

... 0.2mm speed: 60mm/s i have include the left and right sides on their own as well as together in case you ever lose or break one.

thingiverse

free

Open Air GPU Mining Rig by pbrickwood

...e right orientation otherwise the mb will not fit between the space left working on integrating a psu holder, fans and ssd holder