thingiverse

free

Spear Tip Trident with 6mm standard thread by Nys1

...spear tip trident with 6mm standard thread by nys1 thingiverse spear tip trident with 6mm standard thread, 80mm....

thingiverse

free

Toothpaste Tube Squeezer with Threaded Tip by touxiong

...y touxiong thingiverse the cap wouldn't stay on, unless i glued it... this has a threaded tip for easy removal and tighten.

thingiverse

free

Threaded Pool Cue Tip by dsakko

... to use. printed with 0.1mm layers, and 30% infill. increase the infill if you want a harsher more solid feel to the cue. enjoy!!

thingiverse

free

Freak threaded muffler tip

...the marker while tuning and teching it indoors. the threads on this are compatible with smart parts/freak barrel backs....

thingiverse

free

M5 Cap for the tip of 5mm threaded or smooth rods by AbbyJones

...ods by abbyjones thingiverse designed to top the m5 threaded rods on a prusa i3. the part is not threaded, just pressure fit.

thingiverse

free

Paintball Muffler tip - Dye threads

...ions in the future. this was designed by bmc fabrication and your more than welcome to print it for you and your friends. enjoy!

thingiverse

free

Orange Tip Thread Protector (left-handed M14) by Scarlet_Engineering

...with the end. it is designed with only 5-6 threads in the center, so it doesn't take long to...

thingiverse

free

3/4-5 Acme threaded tip for a 1" broom handle. by GavWorks

...horizontally with supports. i added extra supports under the threads in s3d and printed at 03.mm layers with three...

thingiverse

free

Tips box by Achuhran1126

...tips box by achuhran1126 thingiverse threaded box to hold tips

thingiverse

free

Q-tips Canister RevB by FJRocha

...by fjrocha thingiverse this is a traveling q-tip canister created with freecad. the lid is held in place with a two turn thread.

thingiverse

free

Spinning Top With Screw In Tip by antennatree

...p with screw in tip. screw part is 6mm with default thread type in fusion 360 (6h?). screwing the tip in takes a bit of pressure.

thingiverse

free

Totes Large Golf Umbrella Rib Tip Repair Replacement by pulsewave369

...k. nylon thread is suggested so the replacement tip would be less likely to be lost. i bolstered the existing factory tips too.

thingiverse

free

Orange Tip for Lancer Tactical SR-3 VIKHR Whirlwind by Malaka

...all capable of printing precise threading i avoided designing threads to secure the tip so instead i cut out...

thingiverse

free

Barrel tip / adapter für Cyma CM131 and Tracer by Bummi

...für cyma cm131 and tracer by bummi thingiverse a replacement for cyma cm131's barrel tip supporting inner thread für tracers

thingiverse

free

Aspire Cleito Drip Tip by MafrosFPV

...thingiverse this is a macho drip tip i designed for the aspire cleito, you have to print with rubbery thread i use for this one.

thingiverse

free

Threaded Dart Shaft

...t thingiverse compatible with unicorn england champion dart set steel-tipped darts 1/19/2020 - updated thread end to be tapered.

thingiverse

free

bobbin holder by pitracer

...s a threaded bobbin to the matching spools of thread. if the tips curl up try the model with the dots on the ends. happy making!!

thingiverse

free

Replacement Umbrella Tip by dmt

... slight mods to mnis's umbrella tip -- added a hole for sewing thread and a slot to pull out excess nylon before gluing. ymmv

thingiverse

free

Airsoft gun Suppressor by pixelsniper89

...airsoft gun suppressor by pixelsniper89 thingiverse no threading stays on with friction, meant to go over 15mm orange tip.

thingiverse

free

Threaded can by One3di

...mple can where you can place your objects! dimensions: outer: 49.4mm inner: 46.2mm height: 100mm tip: print the thread 0.15mm

thingiverse

free

z axis motor connector prusa i3 by marcomx

...rse motor connector for z axis, for a 5mm or 6mm thread rod fits m5 thread any tips will be much appreciated, but not necesary,

thingiverse

free

Nerf Dart with Custom Tip - and Make Your Own by BuzzAldrin

...tinkercad. tolerances were not taken into account so the threads need to be warmed slightly on the body for...

thingiverse

free

Thread Snipper Case by amasraff

...t have any safety on it and it is quite sharp. made this sleeve case so the pointy tip are enclosed https://youtu.be/giutknwcn2c

thingiverse

free

Eductor with added gardena connector and standard threads for soda bottle

...m16 threads to the tip to add some other tips but they are really not needed. printed on an...

thingiverse

free

Umbrella tip M8 by DmitryK07

...epair of broken umbrella tip. max diameter 20 mm thickness 2,5 mm thread m8 (used only 2 coils) total lenght 10.5 mm material pla

thingiverse

free

G36 Flash Hider by Zerial

...equired : inner diameter is 13mm so you need to use 14mm tap. ...or try print it in 105% and screw it, hoping for self-threading.

thingiverse

free

Cleaning Rod Tip (.22 or .223) by CamasE

...camase thingiverse there are two stl files with different threads they should fit the typical cleaning...

thingiverse

free

M8 Bolt Knob by dantyas

... bolt knob by dantyas thingiverse a printing end for a m8 bolt to turn it into a threaded knob. if you like it feel free to tip!

thingiverse

free

airsoft flash hider / muzzle brake

...in boiling water for 30 seconds and it left-hand threads off easy. also, this is not threaded so it...

thingiverse

free

Trekking Pole Covers by timatee4545

...tips." i have trail ergo cork trekking poles. the threads are weird. i used m14x2.5 with 10 mm of...

thingiverse

free

Tandy leather punch holder by whitetd

...with any standard material .12 layer height for the threads to work well, supports in the shaft support hole,...

thingiverse

free

Airsoft Berrett style compensator / muzzle brake by Zvedak

...tip of the compensator to the bed. no supports needed. if problems with thread, set in the slicer horizontal expansion to -0,1mm.

thingiverse

free

Airsoft M4 Flash Hider by Bionic360

...- 6 seconds. then slowly screw it onto ur threads it should allow you to start the initial threading,...

thingiverse

free

GHOSTS by muzz64

...you feel like sending a tip please use regular paypal and send it to muzz64nz@gmail.com and, to those who do, thanks in advance!

thingiverse

free

LM8UU bearing grease gun injector tip (1/8" NPT) by safety3rd

...m8uu (common 3d printer linear bearing) grease injector fitting to thread onto a standard grease gun with a 1/8" npt thread.

thingiverse

free

US 50 or 25mm circulat knitting needles by JudyBarron

...ith the other end of the string on the second tip 2 and insert in the second tube and attached the second tip 1 on the other end.

thingiverse

free

Water cooling custom loop filling funnel by Empse

...ake sure your final product will fit nicely, it uses very little material and it can be screwed into the thread with 8mm hex key.

thingiverse

free

Vacuum Hose Pivoting Adapter by ksuszka

...ched openscad file and modify the part diameter by yourself. acknowledgments i used the excellent thread library by dan kirshner.

thingiverse

free

Tap Handle - Swirled Decagon

...handle. simply thread the tap handle onto the metal threads carefully the first time, and the threads will be...

thingiverse

free

Muzzle Brake to KC-02 or any 14mm threaded Airsoft barrel

...101% or 102% size to get perfect fit for threads ...

thingiverse

free

Nuke Shift knob by HotEnd

...thread is customizable. the thread is recessed 1" i printed in abs 40% in fill no supports if you like it give a tip......

thingiverse

free

carbon arrow tent pegs_x6 by bjcomp2384

...stronger, and heavier, to use the glue to stabilize the arrow body for real use. also using field tips will give it a better tip.

thingiverse

free

YADHHB - Yet Another DIY "Helping Hands" Base by danricho

...e a bsp thread which is modeled into the base and the soldering iron holder was screwed into the small hole (threaded itself in).

thingiverse

free

Torch Accessory holder by nuttcorp

...for a ronson tech torch. the soldering iron tip threads tend to vary significantly and you may need to...

thingiverse

free

Radius Checker by Graystone

... corners. tip: thread them on a little rope, biggest radius first, and they should snap neatly together as shown in the picture.

thingiverse

free

Taranis Grippy thumb Tips by Ravenholm

...se found these nice thumb grips. made them a little taller so you have some height adjustment and more thread for a solid mount.

thingiverse

free

300ml 310ml Caulk Sealant Cartridge Nozzle Adapter Fitting Cap Thread by silyavski

...to screw. thread is closed there. added 2 male threads if sb need to make their own bottle or...

thingiverse

free

Wood Thread Cutting Jig

...thingiverse this is a jig to help cut wood threads in dowels. the initial version cuts threads in 1...

thingiverse

free

Pool Bridge by Mozella

...you may need to chase the 5mm set screw threads with a...

thingiverse

free

Glue gun tube cartridge angled tip by DArkwIng2

...v4 and v3 for printing standing up for better threads ...

thingiverse

free

Toothpaste Tube Squeezer by Julian248

...ne-hand operation. tip: when threading the toothpaste tube, first insert a corner and pull the squeezer open slightly diagonally.

thingiverse

free

Soap Connector

...to get the stl for this print, tip me 1usd, and write your email in the transfer. then you'll get the stl in mail. -- info --

thingiverse

free

Tip-Barrel Nut Housing by Corsairs

...for a 3d printed paintball marker. so you have threads for a barrel. print 2 copies. some sanding may...

thingiverse

free

ZYX Cartridge Reprogramming Boot by jbebo

... thread (to thread the thread through, i just put the tip of the thread in one end of the hole, and sucked it through the other).

thingiverse

free

Practice Arrow Heads

...(8-32 thread) into a typical arrow insert. not as much weight as a standard field point nor as dangerous in a less rural setting.

thingiverse

free

Turbine Faucet Watersaver by madsoul666

...lockwise direction ¿looking for similar designs? look at this: https://www.thingiverse.com/madsoul666/designs tips are welcome ;d

thingiverse

free

CheckGo golf ball spin balancer top cover

...presses spin button, right hand inserts pen then twists threads in a turn or so until pen tip lightly...

thingiverse

free

Squid pole top spike by vk3ohm

... i found that the threaded spike on the end wasn't strong enough, so i have replaced it with an m6 x 25mm nylon bolt and nut.

thingiverse

free

P.E. Threaded Muffler

...sound. this has been tested to fit with good feedback so far. happy printing! i will be adding other versions down the road soon.

thingiverse

free

salt and pepper shaker by Marcolara2580

...thread results. if lid is too tight try heating threads with hair dryer. 30% infill or higher worked for...

thingiverse

free

FlashForgeFinder Ext SpoolHolder by TotteJohansson

... parts with inner thread to 101% and parts with thread on the outside to 99% and you will have a great result. good luck! /totte

thingiverse

free

3D Printed Pipe connector for 3/4 inch by X_P

...3/4 inch pipe thread using 3d print. https://youtu.be/gw0p3qppiee if you like my designs, give me tip for my next project. enjoy.

thingiverse

free

BFPTouch using Radiator Fan Screw by cpxazn

...people may already have. these particular screws only have threads on the tip, so there are no extra threads...

thingiverse

free

Christmas Tree Stand tree huggers/grip for screws by mopenstein

...tree better. i printed 2 threaded and 2 without threads with the plan to set the 2 threaded pieces...

thingiverse

free

Remix Spool holder for big cones of sewing thread by cmzullian

..."rack" on the wall and have all my sewing threads on display. on the tip of the cone fits...

thingiverse

free

Microphone desk stand (M-Audio) by theanam

...a loose fit because i avoided messing with the threads but because of the weight of the microphone, it...

thingiverse

free

Disney Cruise Mickey Ornament by mmoniz610

...le love in your tip to buy me a drink or or a nit on the town with my sweetheart, the more tips the more i'll create. enjoy!

thingiverse

free

Rain Gauge by samshadnc

...3mm magnet 12mm read switch 2mm metallic road(for connecting the tip bucket) m2.510mm nut 2.5mm threaded nut insert m4*20mm screw

thingiverse

free

Wall Mount Dart Tool Holder by SWolfe360

...ly available at lowes or home depot. the command strip version is easily mounted on any wall using a single medium command strip.

thingiverse

free

Geeetech Spool Holder Top Mount M10 by schlaubi666

...rder to load/unload _v2: - thread rod side open -> makes load/unload easier questions , comments are welcome, tips as well ;-)

thingiverse

free

Bolt and nut by PinoCAD

...with resin printer, because of the better quality of layer, otherwise the thread could not match. if you enjoy it, please tip me!

thingiverse

free

8x22x7 bearing bracket by Scrachi

... are 4.20 mm for m5 thread. <= if you like my work, you can tip me on thingiverse :-)https://www.thingiverse.com/scrachi/about

thingiverse

free

RC0700C table base by Manuya

...ng more. the screws to adjust the table are m6 and i recommend remove the tip. to put those screws is necessary make the thread.

thingiverse

free

Spill-resistant Laundry Detergent Cap by matthewfrazier0

...when the detergent container took a fall. not perfect, threads could be a better match, but appears to be...

thingiverse

free

Ambiano Blender gear by mdgli99

...ne around the nut. print in abs with support and you'll get second life for this product. tip: the nut is left hand threaded.

thingiverse

free

Spool holder for Prusa

...(m8) - 13 cm long. tip: first print part "perah_final_small" and check that thread in the rod fits good for the model.

thingiverse

free

M10x1.5 Bolts and Nuts by JorgTheElder

...chamfer on the bolt tip, easier to clean up threads added washer added sets clearer file names feel free...

thingiverse

free

Baby Lock Babylock Serger Specialty Thread Cup by patmancuso

...these. tipping the designer $1 is appreciated if you find this useful, just hit the blue button to the right of the picture area.

thingiverse

free

Customizable air pump valve adapter by Frodotus

...tor tips may break off easily if force is applied. hence strengthened versions. (threaded m18x2 is adapter for cabrinha airlock.)

thingiverse

free

Parametric Z-axis coupler (stepper and threaded rod coupling) single object by 3DGenie_xyz

...-axis wobble and all my thanks for this simple but great model goes to aspesilorenzo. if you tip me for this one, tip him, too ;)

thingiverse

free

ASG M40A3 Sportline Barrel Thread Adapter by HeartFoxx

...measurements on the model are correct, but circles and threads can sometimes come out rather small, especially in abs...

thingiverse

free

Small Mallet Hammer Tip by jadamo

...fit into 1/4 bolt hole. you manually cut the threads by twisting it in the hole. made it out...

thingiverse

free

Valet Keychain by wepollock

...easily. it's a bit harder to print the inside threads a tip would be to lower temperate and...

thingiverse

free

Bolt Shaped Drip Tip! by morganlowe

...petg. it's a 14mm hex headed bolt with m12x1.25 threads for your e-cig! see it printed here: https://youtu.be/poxalukhzve enjoy,...

thingiverse

free

Nipple Wrench by calviniba

...ng tool. however, it did survive building two wheels and probably could have done a third before i would have to replace the tip.

thingiverse

free

Biro(BIC) Mod by anton610

...anton610 thingiverse for easyer writing. print, drill holes, make threads fill with 5g of 2 compound silicone. holes: 2,5mm,...

thingiverse

free

Dremel 4000 Desk Cutter - Remix by USG

...a function to hide support. please cut the three threads in the vice adapter with a thread cutter. (m5)...

thingiverse

free

Tops

...bottom to prevent material from blocking bottom of handle threads from fully engaging. threads are 8 mm 1.25 pitch....

thingiverse

free

Boeing 747 Wing Bolt Replacement by Gazorpa

...until the head is flush with the wing. existing threads in the aluminum will cut perfect threads into the...

thingiverse

free

Wilton Cake Icing Tool Coupler Nuts by thatguykeek

...break on your icing tool. these take pretty fine threads so i am recommending a resolution of .12mm and...

thingiverse

free

HTProbe Bed Level Probe

...two printed parts. it is very challenging print, the threads are difficult to get right at the same time...

thingiverse

free

Raggio Unify SMA + TBS GPS Mount by falconmultirotors

...raggio! this mount requires m1.6 6mm self-threading screws. pro tip: you can find these screws with a fsd tx-200 or runcam tx 25.

thingiverse

free

Compensator 14mm Negative Thread by SV3Design

...t supports if you can. please tip me for the time i spent modeling and test printing. email me if you have any special requests

thingiverse

free

Glue Bottle Replacement Tip by kimncris

...cyano acrylate bottle nozzle. the good news is the threads work, the bad news is the tip is too...

thingiverse

free

Hollow Cylinder - Threaded top by ITGuy1138

...screwed on completely the seam is almost invisible. i created this cylinder for my girlfriend to use with her item photography.

thingiverse

free

Lid for 5 Gallon / 19L Water Jug by gamla3d

... to seal it. enjoy! gamla 3d workshop ps: please consider following and "tip designer" if you find my designs useful :)

thingiverse

free

Sawyer Water Filter Bits by 2phburns

... a sawyer water filter. ziptie a wide mouth bag to hang filter your water. cover is designed as a cap to keep the hose tip clean.

thingiverse

free

ROBO3D R1_Filament _Colorizer by TronLabs

...for best results. tip: print samples to determine the final color each of your sharpies and filaments will produce for reference.

thingiverse

free

Rambo II Arrowhead 1.1 by tacticalkubrick

...better printers you will get better results. i hope you like it pd: the body stl has better resolution than the one in the photo.

thingiverse

free

Hitch loop for WWII military Jeep trailer (Ossum Jeep) by bidulm

...crew to make a thread at the tip of the part. the spring does its work, and the ring rotates on its axis, as on the real trailer.

thingiverse

free

T Shifter/Knob, M10x1.25 Threads by WeberO

...the supports i used. these supports have .4 mm tips so i'm not sure if they would work with...

thingiverse

free

Adapto Z-Axis Upper Smooth Rod Holder 10mm w/ Threaded rod support by Endless3D

...g/wiki/adapto if you like what you see please feel free to leave a tip: http://modernwebsitesolutions.com/resources/tipjar.html

thingiverse

free

Prosthetic Finger by Natalie2980

... the finger on and attach the string to your wrist! feedback is appreciated and i will try to incorporate it into future versions

thingiverse

free

Center Scribe Measuring Tool by tmt0727

...ob for the set screw. https://www.mcmaster.com/thumb-knobs/system-of-measurement~metric/thread-size~m8/mount-type~threaded-hole/

thingiverse

free

Turbine Faucet Watersaver (Thin Cone Version) by madsoul666

...ded a m24 mini version added new files with more definition (h) (supported slic3r) added clockwise direction tips are welcome ;d

thingiverse

free

Super Glue No Clog Replacement Nozzle by Revedon

...ing. fits glue masters super glue bottles from amazon. may fit others. please comment if it does so i can update the description.

thingiverse

free

Rain Bird Bleeder Valve by Kruzntat

...eeder valve for a 100 asvf 1" part# 100-dv-f 6mm thread // extruded to 7mm with a custom tension tip. distribute and enjoy!

thingiverse

free

Self-Watering Planter in a jar by Jewlz

...ction. i designed a second version (v2) that is easier to print. i am new, if you have any tips for me, feel free to write to me!

thingiverse

free

Hoover Cordless Vacuum wand ring by shakingApple

...it would make a simple modelling and printing project. threads are custom sized and didn't match any defaults in...

thingiverse

free

Umbrella tip replacing by fitimollas

...illo de un trípode. si no tienes ventilador de capa, es mejor que imprimas dos piezas a la vez para que le de tiempo a enfriarse.

thingiverse

free

3mm Guitar Switch Tip by baldygitt

...correct size drill depending on your printer accuracy. printed in abs and smoothed with acetone for factory looking finish. enjoy

thingiverse

free

5 Swiss Franc Coin Box

...me play. i only had to sand it lightly. then i rubbed a candle over it to reduce friction. the coin box has a diameter of 120 mm.

thingiverse

free

Nema 17 Cable Clip for Threaded Rod M8 (Drawing Robot)

... slid into position from the side with the opening. please leave a feedback and if you like my creation a tip is also welcome. ;)

thingiverse

free

PCB Plotter Addon with variable spring load by sidecarfalcon

... on the tip. i used a 3,5mm diameter rod with a threaded end to screw it into the spring bearing, the springs are 5,5mm x 20,2mm.

thingiverse

free

TS100 T12 handle by LegacyCode

...into the 3d printed part, i'm guessing because the threads don't print well, the original screws of the ts100...

thingiverse

free

Double ball bearing spool holder (colorfabb, esun, SOVB, Neofil...) by Nguyenhv

...board). the axis and tips are dimensionned for weasy spool stand, and the adaptors for colorfabb, neofil, sovb and esun spools.

thingiverse

free

Autobody sprayable seam sealer tip by brandonlee603

...ngs: duramic pla+ 220 nozzle 60 bed 30% infill 80% fan z seam: left (to interfere with the slit in the end as little as possible)

thingiverse

free

Bondtech BMG PC4 M6 pushfit adapter

...the type of adapter i used. i didn't add threads to the adapter. it should thread itself in. insert...

thingiverse

free

Bolt from "Iron Giant" by jphnny4

...an appropriately sized split nut that engaged after some depth. well that makes the weird thread termination issue not an issue.

thingiverse

free

Threaded Apple Pencil Case by jsc

... the tip in my pocket, leaving part of it still in the pen. required a replacement. link to latest source: http://a360.co/2tn29qf