thingiverse

free

10mm threaded rod brackets by JackTheQuila

...d screwed it down with those brackets. to make sure, that the brackets don't slide, there is a 10mm metric thread at the top.

thingiverse

free

Round knob for 10mm threaded rod by maakit

... thingiverse a knob on the gas lever of my sailing boat was missing, so i printed one. the knob has a 10mm metric thread inside.

thingiverse

free

Joint for 3 10mm threaded rods by mriv

...joint for 3 10mm threaded rods by mriv thingiverse a simple three-axis joint

thingiverse

free

Spring Spacer modified for 10mm and 8mm thread bar by il_ronca

...hread bar by il_ronca thingiverse same parts modified for fitting 8mm and 10mm thread bar. printed 0.2mm layers, 20%infill enjoy

thingiverse

free

Motormount for Y-Axis - 10mm threaded rods by benzed78

...e of the motor is not moving away, if you tension the belt 27.10.2015: i modified the design, a bit, so it looks nicer for me. ;)

thingiverse

free

Table feet adapter for 10mm threaded feets by waffenmeister

.... especially useful for exussr regions, there these furniture accessories were widely used print with 4 layer wall and 20% infill

thingiverse

free

"Threaded" Barb for 7mm ID Hose to Radiator 10mm by protryon

...p computer radiators being used in my 3d printer. didn't bother with threading, but can probably be done, scad file included.

thingiverse

free

Cable chain buffer for 10mm threaded rod by i-make-robots

...nt the chain from ever reaching the bearing. i needed two to make it work. you can see them in the top right of the photograph.

thingiverse

free

Dual 608 bearing Y idler for Prusa i3 with 10mm threaded rod by Tech2C

...-slightly reduced the bearing rim. you will need: 1x m8x30mm cap screw 1x m8 nut 2x 608 bearings 2x m4x20mm cap screws 2x m4 nuts

thingiverse

free

Adapto Z-Axis Upper Smooth Rod Holder 10mm w/ Threaded rod support by Endless3D

...g/wiki/adapto if you like what you see please feel free to leave a tip: http://modernwebsitesolutions.com/resources/tipjar.html

thingiverse

free

pulley and wheel with 10mm thread square nut compatibility by bhaberdash

...center of 10mm in diameter with additional space to place a square nut. the wheels have space on both sides to fit 2 square nuts.

thingiverse

free

Prusa I3 spool holder (for 10mm threaded rod) by Dranoweb

... complete, as currently this is untested. and all my machines are running flat out. enjoy - and comment if you need assistance.

thingiverse

free

adjustable y endstop holder for 10mm threaded rods i3 by curious_pl

...it or modify scad file, it might crack otherwise (don't force push it). peraps soften tip a bit with acetone if you are lazy.

thingiverse

free

Bridge head with thread by FutureDwight

...oosehead threaded bridge head for use with the two-piece break down bridge. 10mm thread through the body which is also 10mm wide.

thingiverse

free

Sur Ron/Segway X160/Segway X260 Custom Headlight Connector (10mm Thread) by dahrell

...ork for any headlight that has is 10mm thread mount and any bike that has a 27.65mm spread to their handlebar-stem bracket cover.

thingiverse

free

Hex Nut for toilet seat 10mm

...hex nut for toilet seat 10mm thingiverse hex nut for a plastic toilet seat bolt 10mm thread

thingiverse

free

Rodrest by fixitdaz

...rodrest by fixitdaz thingiverse rod rest with 10mm thread

thingiverse

free

Threaded Drawer Knob by CraftingWorks

...threaded drawer knob by craftingworks thingiverse threaded (m8) drawer knob. mounting hole is 10mm deep.

thingiverse

free

Paint mixer 2 by OzzytheMozzy

...paint mixer 2 by ozzythemozzy thingiverse 10mm extruded for drill chuck, or 10mm hole for threaded rod with 2 nuts.

thingiverse

free

Prusa i3 Y-Corner 10 mm by Draman

...prusa i3 y-corner 10 mm by draman thingiverse y-corner for 10mm threaded rod (front) and 10mm/8mm (back)

thingiverse

free

Centrifuge Foot by gringer

...centrifuge foot by gringer thingiverse centrifuge foot with 10mm threaded hole.

thingiverse

free

Prusa I3 10mm rods parts by villamany

... to use 3 o 4 bearings on the x carriage (two different .stl files) sorry but my prusa i3 was sold and no pictures availables.

thingiverse

free

Coupler 10mm by AzzzTech

...ztech thingiverse simple coupling to couple a 10mm threaded rod to a nema17 stepper motor. needs 4x m3 screws and 2x m5 screws.

thingiverse

free

Macro ring M39 to M39 10mm

...macro ring m39 to m39 10mm thingiverse thread offset 0.1mm. print with supports.

thingiverse

free

Tevo Tarantula Z support by yamojam

...tevo tarantula z support by yamojam thingiverse printer: tevo tarantula z support for 10mm threaded rod

thingiverse

free

5kg 3d Printer Filament Roller

...iverse 5kg spool holder. 6mm/m6 - 10mm/m10 threadded rod required for core. 22mm bearing will fit in shaft and on threadded rod.

thingiverse

free

V brake threaded hole plug by lomar1572

... by lomar1572 thingiverse print as downloaded, no support, use brim, accepts 5mm hex 10mm x 1.25 thread pitch 0.1mm layer height

thingiverse

free

Parametric Prusa/Mendelmax Z Screw Isolator - M8 - 10MM by demanu

...part as created by llluis, but made in openscad for easy configuration and adjustments => m8 threaded rod, but 10mm smooth rod

thingiverse

free

Flush button replacement Faismilani by digdug

...placement faismilani by digdug thingiverse a replacement for the broken flush button, it need a m10 (10mm) thread into the hole.

thingiverse

free

Threaded Handle by CraftingWorks

...threaded handle by craftingworks thingiverse yayyyyy the threads finally transferred to the .stl turns out i'm just...

thingiverse

free

Spool adapter ring by Verid

...ergear. reduces internal diameter of the hub to 10mm. might need a little cleanup with 10mm drill bit to fit threaded rod better.

thingiverse

free

Y Corner for Prusa i3 for 10mm Rod by Jacktheknife47

...hreaded rods. the foot has two 5mm holes for mounting. this corner is ~ 1.5mm taller to allow for clearance of the 10mm bearings.

thingiverse

free

Prusa i3 anti-vibration clamp by CatalanCaptain

... prusa i3 with 4 of this clamps. it holds the 10mm threaded rod in place. the holes are designed for 3,5mm self-threading screws.

thingiverse

free

prusa clip 10mm (prusa i3) by TK_DESIGN

...rusa clip 10mm (prusa i3) by tk_design thingiverse use with 10mm threaded rod. hard to break v2 version. v2バージョンで折れにくく成りました。

thingiverse

free

Coolant Overflow Cap by schrodingers_cat

...coolant cap for my 2003 nissan sentra. overflow tank threads outer diameter, 32.5mm inner diameter, 30.5mm thread pitch, 3.4mm...

thingiverse

free

Rostock MAX mounting for Merlin Hot-End 1.75mm by askan

...the rostock max (v2). you need to cut the threads by yourself. for this you need the stuff from...

thingiverse

free

10mm Flansch / Cover by RapApp

...m rod. 2mm screws, 16mm long. no drill or threading. you can find the file on www.onshape.com try it out, it´s really for free!!!

thingiverse

free

Cartoon Crown Gear Knob by coullsy31

...rown gear knob by coullsy31 thingiverse carton crown gearshift knob. 8.5mm hole ready to be tapped to 10mm thread of your choice

thingiverse

free

Spool hub/adapter by darealmoo

...y darealmoo thingiverse this is a treated filament-spool-hub to center the spool on 8 or 10mm rods. thread-length is 50 or 80mm.

thingiverse

free

Wire Holder by Acarius10

...ng your wires. it fits on both 8mm and 5/16" threaded and smooth rod. it also fits zip ties for securing it tightly to rods.

thingiverse

free

ASG Scorpion Evo Barrel Nut/Extender by Andras83

...er diameter 24mm, inner diameter 10mm, total lenght 73mm, 18x1mm cw inner thread (20mm long), 14x1mm ccw outer thread (13mm long)

thingiverse

free

Prusa i3 Z Axis Top and Bottom for 10mm Smooth Rods by Parksie

...uide for 10mm smooth rods. also shifted 2 mm back to allow for x idler and x motor mounts for 10mm in regards to m5 threaded rod.

thingiverse

free

Anycubic Mega Eagle Eye Support

...he printing head. bolts to the nozzle fan bolts. ( the eagle eye ive used is a 18mm flange cob with 10mm threaded shaft 12vdc )

thingiverse

free

M3 Spacers by Adikss

...m3 spacers by adikss thingiverse m3 spacers without thread in different heights: 4mm 5mm 6mm 8mm 10mm 12mm 14mm 16mm 20mm

thingiverse

free

1605 Ballscrew Ball Nut Removal Sleeve ( Hollow 10mm ) CNC by The_Architect_23

... shafts. thread the ball nut off the rod and directly onto this tool. slide off tool and transport nut without loosing the balls.

thingiverse

free

120mm PC Computer Fan Adapter for 10mm Offset

...ount to rad, and the smaller holes can be tapped (#6-32 thread) or self tapped with the included long corsair screws for the fan.

thingiverse

free

8mm Rod Clamps by thystonius

...8mm rod): single (10mm) double (20mm) single (10mm) w/acme threads 2mm pitch (single start) clamp uses m3 20 screws...

thingiverse

free

CTC Prusa i3 z-axis threaded rod bushing by rOzzy

... rod is going through a 10mm hole, and rattles when the x carriage is on the lower parts. this bushing is meant to fix just that.

thingiverse

free

goal zero lighthouse micro cap by b4ll5oh4rd

...an be mount on the standard camera tripod with a 1/4 thread. magnet 20mm x 3mm (hole*10mm) so it can be attached to metal surface

thingiverse

free

Prusa Mk2 Y tensioner by 3ddas

...t uses 10mm threaded rod for all the base. i built this y axis tensioner for the mk2 and made it slightly beefier for a 10mm rod.

thingiverse

free

Ball socket for JD tractor cab suspension by PatCub

...tor cab suspension by patcub thingiverse replacement ball socket for john deere tractor with cab suspension. m6 thread 10mm ball

thingiverse

free

Car Throttle Shift Knob by 123dutchman

... knob by 123dutchman thingiverse this shift knob will screw onto a na mx-5 (miata) and many other cars with a 10mm x1.25 thread.

thingiverse

free

Pokemon Pokeball Gear shifter knob by Afrokid

...r knob by afrokid thingiverse this gear knob suits a 10mm x 1.25mm threadded gear shifter. it was designed for my hyundai excel.

thingiverse

free

Key Duplicating Machine Attachment for Rotary Tool by Walnetto

... cutting wheel adjustable by moving setting blade depth (2x) m5-0.8 screws to act as clamps added m18-2 x 10mm rotary tool thread

thingiverse

free

Nikon 52mm lens cap holder for tripod thread by Siivu

...ou may break the thread into the hole. especially if pla like mine. thread needs a little clipping from the top to fit properly

thingiverse

free

Camera Flash & Umbrella Holder with Tripod thread by MasterFX

... 10mm diameter and can be fixed with a m4 screw. it should be printed with 0.2mm layer height to get the thread working properly.

thingiverse

free

Spool Holder for 10mm shaft by Gephorian

...orian thingiverse throwing my version of a threaded spool holder out there since i was too lazy to look for one that would work.

thingiverse

free

YF-S201 Flowmeter Hose Adapter by mimshad0w

... hose adapter by mimshad0w thingiverse yf-s201 flowmeter hose adapter. suitable for 10mm aquarium pipe. 1/2" npt threading.

thingiverse

free

bulkhead barb by turboprint3D

...for a project so here it is . 12mm threads 10mm large hose barb 8mm small hose...

thingiverse

free

KTM RC125 bolt by JoniErkkila3D

...from the factory and striped the end of the threads this is 10mm longer then...

thingiverse

free

Monoprice filament replacement lever by baden70

...10mm screw for holding the bearing in place. screw threads into the...

thingiverse

free

Let's Split Keyboard Case by ziptyze

...let's split keyboard case by ziptyze thingiverse this design uses 8 x 2.5m 5.6mm threaded inserts, and 8 x 2.5m 10mm bolts.

thingiverse

free

LGDBHG21865 Batterie Box by NeoCortex

...watch?v=6n3jo87saws update i noticed a 5mm thread is enough by far. so i added a box and a cap with a 5mm thread instead of 10mm.

thingiverse

free

Men's Ring - Tyre Thread

...d items. love to see the result. it comes with three different thread patterns. ring size 20mm diameter with 10mm width. thanks..

thingiverse

free

Z Rod Coupler: 4.5mm flat motor shaft to 5mm threaded rod by swapsCAPS

...th a 4.5mm flat sided shaft to a 5mm threaded rod. use m3 10mm hex bolts together with m3 lock nuts to screw the pieces together.

thingiverse

free

Prusa i3 Z axis upper mounts with 5mm threaded rod top bush hole by wayne69x

...hese z axis upper mounts to allow me to fir a bush on the m5 threaded rod and stop the wobble/squeak. the additional hole is 10mm

thingiverse

free

Bolt, Hole & Thread Test Block by timmaz

...m4, m5, m6, m8 & m10 internal and external threads and 4, 5, 6, 8, 10mm...

thingiverse

free

Prusa Bowden China Honend Holder by smoki3

... by smoki3 thingiverse fit to the bg metal hotend without the push fit. use normal push fit with 10mm thread. for 1,75 filament.

thingiverse

free

YANSB (Yet Another Nozzle Storage Box)

...the size /number of the coupler spots the 10mm threads i bumped to 10.1mm, as 10mm was too tight....

thingiverse

free

G3/8 to 10mm barb adapter - water cooling drain plug /fill by ReefDudes

...k-af fillport drain plug and attach a hose to either fill or drain your loop. i sliced it at 0.1 and printed using cura defaults.

thingiverse

free

Spoolholder (M9 thread) by dargul

...so i created a bigger (by 10mm) version (v2). init 03.04.2017: spoolholder for the threaded rod (m9) that comes with the anet a8

thingiverse

free

lamp base by Tropez

...m thread for connecting lamp holder to base.. updated 05/12 2017 with v02 file, with increased surface area for ball connections

thingiverse

free

Springy Spool Holder by mr_fibuli

...igned to sit on an 8mm threaded rod (10mm inside hole), and to fit a range of different spool sizes from 50-55mm inside diameter.

thingiverse

free

SpOOLder; Spool Holder for geeetech i3b acrylic by tncngn

... tncngn thingiverse spoolder is for geeetech i3b acrylic model. you need 8mm and 10mm threaded rods and four m3x20 or 25 screws.

thingiverse

free

Gas Strut End, Ball joint Cup 10mm, M6x1 by Balazs

...a position where you get a slight overlap with the retaining wire to keep it captive. retainer wire holes are sized to 1.1mm dia.

thingiverse

free

prusa i3 rework 1.5 alu frame brace for M10 threaded road by hygy

... long one you need 4 pieces of m4x23mm screw + nut + washer 2 pieces of 36cm long m10 threaded rod + 8 pieces of m10 nut + washer

thingiverse

free

Prusa i3 Y Axis Sainsmart Endstop by AbbyJones

...top holders for the prusa i3 with cutouts to accommodate sainsmart endstops. this is for 10mm threaded rod and 8mm smooth rod.

thingiverse

free

International Moth Sliding Gudgeon for rudder/ tiller mechanism (Updated) by Louis_Cypher

....fits (at least) bladerider and assassin rudder. i updated it to a version that can be enforced using carbon rovings (optional)

thingiverse

free

Prusa i3 Y-Axis Endstop Mount - 10mm by tjb1

...d bed on mine. uses 1 - m3 + nut for the clamp and m2/m3 for the endstop. inventor file is included if you want to modify it.

thingiverse

free

10mm LED Mount Holder by bbeavis

...y more lenient tolerances to make assembly easier added some chamfers for aesthetics added ramps to the nut to prevent loosening.

thingiverse

free

BSP 0.5 Cap by tsohr

...e bsp (g) thread 0.5 inch diameter, 10mm depth cap not sure how much it can provide water tightness. o-ring room in the bottom..

thingiverse

free

Z Bearing holder for 1200DKF, Sparkcube by eduard80

...threaded rod for z axis on a sparkcube. sparkcube is a great open source 3d printer design! have a look:http://the-sparklab.de/

thingiverse

free

One Hitter with Hole for an M3 Threaded Insert by himonroe

...o pop it out. m3 threaded insert with an m3 screw to hold it all together. you can make this so tight i'd say its waterproof.

thingiverse

free

2020 Extrusion Thread Tapping Jig by mjbudden

...t the tap, and once you have tapped about 10mm, unscrew your tap, remove the jig and then continue your tap to the desired depth.

thingiverse

free

2020 Filament Spool holder by Brasse

...(300mm+ diameter). the slot for the threaded rod has threads to keep the rod securely in place. you need...

thingiverse

free

Super simple spool holder for Prusa i3 (Box frame) by ffleurey

...nd a piece of 8mm smooth rod. it works great. i used 2 pieces of m10 threaded rod (16cm each) and about 40cm of 8mm smooth rod.

thingiverse

free

Gladiator GearWall / GearTrack Mounting Backets

...n. if you want a better fit the holes can be tapped. i found printing with extra walls adds great strength to the threaded holes.

thingiverse

free

Heigth Gauge by nilsolav

...been able to print the gauge or fasteners with threads that actually work, so the gauge1/gauge2 and fastener models...

thingiverse

free

Prusa Secure Y-Corner by Empyrion

...rsion of a prusa y-corner, i designed this thing to meet my own needs. this is designed for 10mm threaded rod and 8mm smooth rod.

thingiverse

free

Spool box by RMB

...achine thread spools. the box holds 18 spools 21mm diameter and 9mm wide. the hinge is made to use m2,5 screws 10mm to 20mm long.

thingiverse

free

120mm Fan Filter holder by meryan00

...a 120mm fan with m3 screws threaded into the printed plastic. a 10mm thick mesh filter then sits inside the lip for easy removal

thingiverse

free

Cable grommet by sifosifo

...s up to 14mm. edit: version with right thread is added. both nut and bolt look a bit differently, but dimensions remain the same.

thingiverse

free

Adjustable z limit switch holder by Jigsaw232

... regular screw m6x30, m3x15mm plus nut m3 2x wood screws m 1.7x10 this is fitting to switches with distance betwen screws of 10mm

thingiverse

free

Anycubic Kossel Frame Corner Reinforcement by dromlada

...r and 1 upper braces / rod. hole for steel pipe or threaded rod (length that fit your printer) are 10mm. glued whith super epoxy.

thingiverse

free

Ball and socket magnetic holder by jabberwoku

...gnet dimensions: 3mm thick, 10mm diameter socket nut threading: none-standard thread, just made it strong enough as plastic part.

thingiverse

free

Under-tray nut for Porsche by fl_mike

...abs or nylon may work as well. note: the threads on this nut are not a standard metric machine...

thingiverse

free

propeller balancer by MichiKirchi3D

...de with the threaded rod for balancing i use spray-paint (i cannot guarantee that it is 100% accurate) but i'm happy with it

thingiverse

free

Porte-bobine de fil à coudre / Sewing thread spool holder by Lolo3DLab

...machine. the base is provided with places to put what you want. you will need a 10mm aluminum bar to cut according to your needs.

thingiverse

free

Thread Rack by Kirjava

...ntre and centre to end, 5mm deep and however wide your pin is. string holes: 5mm from edge, 2mm between edges of holes and sides.

thingiverse

free

Arduino bluetooth controller by TheSwedishBear

...ast 10mm. threaded inserts like this i added the f3d files so if you want to make a remix to it you can download it and remix it.

thingiverse

free

MPX plug form for hot glue by 3D-Muc

...temperature. ptfe material is best suited for milling. the threads are to be made with a thread cutter. 4...

thingiverse

free

Distance Bolt M3x10 by Golkun

...uld be compatible with many cad programms. spannerwidth: 6mm outer thread length: 4mm inner thread length: 6mm corpuslength: 10mm

thingiverse

free

Shutter hook

...utters you will also need a bolt and the respective nut for each individual piece the bolt has a 10mm head and a 6mm threaded rod

thingiverse

free

Radus Prusa i2 - LM10UU - 10 by radus

... prusa i2 - 10mm, reprap 3d printer parts compilation for lm10uu linear bearings 10 mm thread rod frame t2.5 or gt2 timing belt

thingiverse

free

Extrudeur pour mk7 by phil34

...odified: for pulley mk7, i increased the height for the blocking ptfe and decreased its diameter to be able to the thread in 10mm

thingiverse

free

12 mm Tee Nut 10 mm thread for Minimill

...ot cut lengthwise down the thread three thread sizes 10, 8, 6 mm not of widespread interest i know but may be useful to some :-)

thingiverse

free

Bird 8000-series dummy load feet

...drilling needed. 4 pcs. m6 screws needed, the thread depth of the foot is 7mm. the screw lenght must threrefore be 7mm or less.

thingiverse

free

hatchbox spool holder by Fordreagon

...nt spool 1.75mm 1kg required for single spool x10 m6 nuts x3 115mm length m6 threaded bar x2 m6 barings with 10mm outer diametre

thingiverse

free

Support bobine Witbox bis by gdjeff

... behind with existing bolt 10mm threaded shaft (i still have to make it shorter) i'm working on a fast fastener for the spool

thingiverse

free

Malectrics Arduino Spotwelder Case With Built-in Threaded Standoffs by mishrasubhransu

...responding side. both top and bottom part of the case are to be printed with supports on and outside of the case facing the bed.

thingiverse

free

Universal Filament Spool Holder for 6000Z bearings by wizardpc_gct

...2mm bearings and 8mm (5/16") threaded rod. i made this because i had some 6000z 26mm bearings on hand and the math was easy.

thingiverse

free

Prusa i3 spool holder by mahdikhashan

...; parts and 10mm threaded rod for filament holding. use two cable tie to fasten "bottom" part to the plexiglass plate.

thingiverse

free

G13BB remote IAC mount V1 by DaGamma

... for putting in short pipe with inside dia of 10mm. the standard iac valve has a bottleneck of 81mm² while 10mm tube has 78,5mm².

thingiverse

free

dial indicator for axa toolpost for a smaller lathe by magiva

...plastic. i use a thread tap to clear the threads ...

thingiverse

free

Standoff M3 Collection by MrPurple

...wrench size. i recommend to clean and cut the threads by screwing in a metal bolt/nut a few times....

thingiverse

free

Snoot tube for sea&sea YS-D1 - 20-10mm diameter by donmegglos

...something similar. this allows you not to worry about loosing them when there is no time to screw them onto the threaded sockets.

thingiverse

free

Screwable Tolerance Test

... +up to (10 + tolerancestep5) the model is fully parametric, using freecad you can set the tolerancestep easily in the spreadshit

thingiverse

free

cross brace Ender extender 550mm high by crazydutchman

...hreaded rods m6 (6mm), 800mm long, 4 m6(6mm) nuts, 10mm socket wrench, m6 bolt on the top to secure the brace to the 2020 profile

thingiverse

free

P3steel Parts: Z Spindel stabilizer by dargul

... created two version, one with a 12mm and one with a 10mm thread shaft. 8x22x7 bearings: http://s.click.aliexpress.com/e/dlk7ligu

thingiverse

free

Halt Holder i3 Y Edition by markab

... 10mm threaded rod but could be modified in the source file. success will depend on your microswitch and bearing holder design.