thingiverse

free

Mini-quad frame for 8" props (max) by ScottCher

...f escs, radio receiver and other components will likely need additional tie-down spots - this design will continue to be refined.

thingiverse

free

Gen 8 Quad by pborges

...sing the frame in conjunction with rotor guards. also, the sensor mounting plate is not accessible from the bottom of the frame.

thingiverse

free

GoPro Hero 8 mount for FPV quad zmr250

...ter. a long m5 screw and a m5 nut secure the camera to the mount. test fligt on a really shaky quad https://youtu.be/ewecngvtf_4

thingiverse

free

Iphone 8 gopro mount for quads by nijotak

...nted with nylon just for extra protection and lightness, but should be ok with pla as long as you print in the right orientation.

thingiverse

free

Ozone Quad-X and X-8 Mulitcopter 300mm by orionunmanned

...inspired) -designed with lean manufacturing methods in mind hot glue works good to lock in the motor booms, and void wobble.

thingiverse

free

Quad Fidget Spinner (with 8 M5 nuts and ceramic bearing). by mc0676

...ning time: about 90-120 with that bearing but u can use the 608 model u want, of course. print at 150 micron (0.15 mm) each part.

thingiverse

free

H king colour quad frame WS2812 8 BIT LED mount by clifton2

...d from gearbest http://www.gearbest.com/lcd-led-display-module/pp_227264.html? also has a mounting hole for a standard 5v buzzer

thingiverse

free

High Speed Quad 8 inch props by LeonardTHall

...inside the arms that must be removed with a screw driver. be careful not to spit the arms during removal of the support material.

thingiverse

free

Quad Copter by gabetz89

...ant the story behind the construction of this quad visit https://sites.google.com/site/betzmobileengineering/projects/quad-copter

thingiverse

free

Oxym 7" GoPro 8 mount by iporty

...thingiverse gopro hero 8 mount for oxym 7" foldable quad ...

thingiverse

free

PM300 LED Mount Bumper by PeteDee

...for the ws2812 8 led strip on a pm300 quad ...

thingiverse

free

Quadcopter Hanger

...standard closet wire shelving. large version will work with 4-8quot; quads and the small version will work with 2-3"...

thingiverse

free

Folding 450 Quadcopter by VooDooMoN

...this quad can fold up into a 12" x 8quot; x 3" envelope. extended, this quad becomes a 450...

thingiverse

free

Redmi note 8 52mm filter holder

...thingiverse 52 mm filter holder for redmi note 8 quad camera. the support has a hole for all the...

thingiverse

free

Mini Quad LED holder by PHansen

...these are for the the programmable led sticks with 8 leds such as neo pixels stick or clones. i'm...

thingiverse

free

Spacer 8 mm for FourOut (XL) by smartshapes

...by smartshapes thingiverse this spacer is for the mini h-quad fourout (xl), it can be used, instead of the...

thingiverse

free

keychain quad tool by voodoopt

...thingiverse key to be used for screws 10 / 8 / 5.5mm to ring use (type1)https://goo.gl/zrwubp similar in...

thingiverse

free

Spacers for Go Mini v2.0 FPV - UntestedPrototype by flybybye

...mm spacers to use instead of nylon ones. frame linkhttp://untestedprototype.com/2014/03/go-mini-v2-0-fpv-quadmanual/ ...

thingiverse

free

lipo quad->okto charge adapter by bkubicek

...adapter by bkubicek thingiverse this device enables to charge 8 3s lipos using a quad 6s charger. this is...

thingiverse

free

Mobius holder for ZMR250 by rnelias

...mobius holder, including damper fixing points, for zmr250 mini quad it's tilted 8 degrees upwards to compensate forward...

thingiverse

free

Goby 210 FPV Quadcopter LED Mount by clobybar

...goby 210 quad. pla .1 layer height (.15 initial) .8 wall thickness 20%...

thingiverse

free

case for 2inch quad by Witty420

...to- 100mm motor to motor with 2.5inch props has 8 holders for 300mah 2cell..4in bottom and 4 in the...

thingiverse

free

DAY: 8 Quadcopter Bracket by 365_Days_of_3d

...i know another quadcopter part. sorry but i am building a new quad and needed another level. holds a kk board and small receiver.

thingiverse

free

Inov 3D Flower Power Quad by mujin

...we call it flower power uses 5 22 by 8 by 7 ball bearings print 1 flower power quad...

thingiverse

free

Chameleon Hero 8 Mount 45deg

...mount to have 45deg back tilt when mounted to quad original file has about 25deg tilt when...

thingiverse

free

2306 motor protect

...print and click it on. add ~8 grams(pla) to quad ...

thingiverse

free

Multibox round for quad and everything by Belov

...mm height : 50 mm add a version with 84 compartments for larger space in the...

thingiverse

free

Goby 210 FPV Quadcopter Bottom Skid by clobybar

...ground when racing. pla .1 layer height (.15 initial) .8 wall thickness 20%...

thingiverse

free

Evolution Tube Frame Quad

...quadcopter using 14mm tube arms. print 2 plates and 8 motor mount plates, 4 for top and 4 for...

thingiverse

free

Corona FASST Receiver R8FA Holder by Drezt

...r8fa , made for place into rc plane or quadhexa/octocopter.with 2 holes for antenna and easy...

thingiverse

free

Ublox 8 GPS mount for ZMR 250 by imichelena

...a crash protection for the upper side of the quad additionally this provide extra space on the model to...

thingiverse

free

Goby 210 FPV Quadcopter and RunCam 2 Mount by clobybar

...runcam 2 detachable. pla .1 layer height (.15 initial) .8 wall thickness 20%...

thingiverse

free

LED Bar for Emax Nighthawk 250/280 Pro by alfie_mitchell

...led programable led strip on the end of your quad it is designed to slide on top, being held...

thingiverse

free

m3 standoffs for mini quads by Dcdesigns

...in 40, 35, 30, 25, 20, 15, 12, 10, 8 and 6mm lengths. this should work for many different...

thingiverse

free

Propeller guard for Crossfire or T4/Tubular Quad by mattster98

...if yours have broken off like mine! :) also works with t4/tubular quad arms that have similar size tubes under the motor mount.

thingiverse

free

QAV 180/210/250 LED Holder NEOPIXEL by bonzailyte

...holder for quadcopter qav 180 210 250 or whichever quad has a ~29.6mm spacing from screw to...

thingiverse

free

A-Tail Quad by resago

...out: motor : 1000kv/1200kv props : 8"/6" battery : 180 mah 4-cell fc : kk2.1, etc.. esc : 25amp...

thingiverse

free

Quad Spinner by robegg1971

...so i am sure it can be improved on. 608 skate bearing should press in nicely. thanks for...

thingiverse

free

GoPro Hero 8 Rugged Mount - AstroX X5 30 degrees by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. you can find me on...

thingiverse

free

A-Tail Quad Version 2 by resago

...quad in 123d design. completely rounded and filleted. fits 8quot; props as is. needs a large printer. barely fits...

thingiverse

free

GoPro Hero 8 TBS Jello Guard - AstroX X5 25 deg by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. you can find me on...

thingiverse

free

Nano Quadocopter/Nano Quad Wings & Rotorgard by Jedijake1

...a replaced the batt with a bigger 500mah battery 7-8 min flight...

thingiverse

free

Dread_FPV ZZ Quad 5" Freestyle by Dread_FPV

...6 mount is compatible with hero 7. gopro hero 8 mount will be made when requested. right now there‘s...

thingiverse

free

Folding Quad with Removable Gimbal Mount by bmacw

...parts from my 6x6 printrbot simple metal. just need 8 x m4 screws for the folding arms and 8...

thingiverse

free

mobius 40 degrees mount for FPV / QUAD / Strap mounting by dgworks

...40 degrees mount for my mount, not yet tested *82/17 made some minor adjustments like extented bottom plate for...

thingiverse

free

Prusa i3 Steel x axis system leadscrew by 3DS-QUAD

...screw 8 x 35 mm cap screw 2 x tr8 flat sided...

thingiverse

free

Backpack hanger for quads by phaseshift

...are tight, you might want to drill with a 1/8quot; drill bit before to make it...

thingiverse

free

Quad Line Kite Horns for Line Winding by CocoNut

...this the lines should be wound in a figure 8 to be able to do that i designed the...

thingiverse

free

GoPro Hero 8 RS Mount for ShenDrones Squirt v2 15 degrees by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. i'm currently on a mission...

thingiverse

free

GoPro Hero 8 PolarPro ND filter - GEPRC Mark4 HD 25 Degrees by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. you can find me on...

thingiverse

free

Diatone Roma F4 LR Gopro Lite Hero 6/8 mount 15deg by jr_zzzz

...jr_zzzz thingiverse hero6/8 mount for diatone roma f4 lr quad weight about 4 grams. made for betafpv hero6 case,...

thingiverse

free

Inductrix Plus FPV Travel Case by Heatracer

...on the lid to put slight pressure on the quad to hold it so it would not flip over...

thingiverse

free

Angled Mobius Mount for Emax / Nighthawk 250 by Zapf

...tilt, compatible with the emax / nighthawk style mini quad frames. two versions available, one with a small hole...

thingiverse

free

Quad frame by touchthebitum

...props : 4x4.5 rx: frsky xsr lipo : 3s 80 mah 24.12.2017 new frame for 30.5 x 30.5mm fc...

thingiverse

free

FPV FatShark 600TVL & CCD Camera Mount for Cloneout & Hammer 2.0 Mini H Quad by MichaelErwin

...as well. use m3 x 36mm button head bolts 8jul-2014 updated to handle the lens set screw to either...

thingiverse

free

Pignon 8 dents moteur électrique by Electronlibre

...moteur électrique 250w acheté sur bangood : https://www.banggood.com/24v-200w-2750-rpm-electric-brushed-bike-scooter-motor-clockwise-2-wire-zy1016-p-1202594.html?rmmds=myorder&cur_warehouse=cn pour quad diy à base de 2 vélos btwin de...

thingiverse

free

Hero 8 Mount for Squirt V2

...the gopro hero 8 for the squirt v2 3" quad - but it may fit on other models. this...

thingiverse

free

Lumenier QAV-S Caddx Vista Antenna Mount QAV S by Jantar

...caddx vista antenna mount for the lumenier qav-s 5'' quad printed in tpu with a 0.2mm layer height, 20%...

thingiverse

free

Angled motor mounts for mini quads! by DengisKong

...3/25/15 - added angled mounts with qav mounting pattern. 811/15 - added 10 degree mounts for zmr250 with 3mm...

thingiverse

free

TFG500 Quadcopter by joefarmer

...use (qty 16) 3x16mm metric bolts or (qty 16) 6-32x5/8quot; sae...

thingiverse

free

GepRC Naked Hero 8 gopro style adapter mount by sircrashalotfpv

...because i use it on cusom mounts used on quad where prongs are not so tall and...

thingiverse

free

BumbleBee back LED plate by ARGHtur

...to hold the 8 x 100mm led. makes the quad look coolhttps://www.instagram.com/p/balcgz4j1sp/?taken-by=arghtur ekstra holes for zipties so you can...

thingiverse

free

Spring Landing Skids for 5in Quad by ScrapHeapInd

...well. (20mm plus mount) for my original design, see: https://www.thingiverse.com/thing:459860 ...

thingiverse

free

NeoPixel mount by David_J

...to fit on the front and back of my h-quad multi-rotor, and the mounting holes are spaced to suit...

thingiverse

free

Fake GoPro 8 + Session by aofpv

...you don't want to risk your gopro on your quad. set your slicer to do a pause or filament...

thingiverse

free

GoPro Hero+ 20 Degree Mount for Drone/Quadrotor/FPV by RockstarAlchemist

...mount. if you want another angle, let me know. 824/2016: added a 5 degree...

thingiverse

free

Simple Motor Mount with 8˚ Tilt to Center by flashbrando

...length. if you're looking for some dihedral in your quad or hex, this could be the thing for...

thingiverse

free

Dirt Tire and Rim by JimmyDean

...around the middle. i created this becuase i like quadng and off-roading and i though this would be a...

thingiverse

free

Diatone Taycan Minimal GoPro 6/7/8 mount by nagobe

...snuggly. i use this style mount on all my quad. i was not able to use standoffs but some...

thingiverse

free

GoPro Hero 8 with Rollcage ND - iFlight DC5 - 30 Degrees by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. you can find me on...

thingiverse

free

GoPro Mount - Martian 215 Polar Pro ND Filter 25 Degrees by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. you can find me on...

thingiverse

free

Goby 210 FPV Quadcopter HS1177 with GoPro Lens Shield by clobybar

...goby 210 quad. pla .1 layer height (.15 initial) .8 wall thickness 20%...

thingiverse

free

3D Printable Mini Brushed Drone "Gamma" by seanzhan0319

...650mah batteries. i am able to fly this little quad for around 8 minutes. for more information, refer to...

thingiverse

free

Ultralight 5" Quadcopter

...to its light weight. here's a full parts list: https://rotorbuilds.com/build/1833 ...

thingiverse

free

Snap-in propeller guards for Eachine QX95 by madlex

...madlex thingiverse propeller guards for the eachine qx95 micro quad about should weight about 6 to 8 grams the...

thingiverse

free

GoPro Hero 8 with ND Filter PolarPro for ImpulseRC Reverb at 25 and 15 degrees by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. you can find me on...

thingiverse

free

Goby 210 FPV Quadcopter HS1177 Camera Mount by clobybar

...if nicely asked. pla .1 layer height (.15 initial) .8 wall thickness 20%...

thingiverse

free

MOBIUS Cage mount for FPV racer RCX, QMD by AndreaSignoretto

...mobius lens. available in different angles and for different quad models. i added a lens cap that fit the...

thingiverse

free

QAV180 30 Degree Camera Mount by rocketburn11

...be used to help secure the mount to the quad if you're worried about...

thingiverse

free

Prop guard for 75x75mm micro quad by Patchlead

...crash a few times, and see what is needed 8) ...

thingiverse

free

Kite Line Winder by wingmaster

...winder by wingmaster thingiverse i designed this for my quad line kite. the lines can be hooked over the...

thingiverse

free

Hubsan Q4/Estes prop guard by Ze_Racing

...estes proto x nano/syncro/slt 3-21-14 v2 fits all current quad. 6-16-14 v3 the lightest you could probably design a...

thingiverse

free

Laser Cut Quadcopter Frame by DylanFM

...designed to be cut out of 3.1mm (sold as 1/8quot;) baltic birch plywood. the whole thing is glued together....

thingiverse

free

Naked Gopro mount for whoop boards (26x26mm) by osliang

...boards (26x26mm) by osliang thingiverse what's this mount for? https://oscarliang.com/ultralight-3inch-quadnaked-gopro/ it's designed for the namelessrc gopro 8 case and...

thingiverse

free

Quadra-Pigeon by jimlee

...here's a video teaser we made with them : http://vimeo.com/10892499 ...

thingiverse

free

250 Quade Racer by Heffnut5000

...canopies: .2 resolution, 10% infill, w/raft and supports update 815 printed well had to make some changes to the...

thingiverse

free

8-LED Neopixel Stripe holder (OpenScad), 2 mount versions, fully parametric by HenningS

...as provided it fits to my diatone fpv 250 quad with 28mm fixing hole...

thingiverse

free

CR-10 Rear Switch Mounts (3D Chameleon)

...mounts (3d chameleon) thingiverse this print is for the quad color option by 3d chameleon. one switch will require...

thingiverse

free

Lynxmotion Crazy2Fly Quadcopter Feet + Prop Guards by dmerand

...6", and 7" props. update 2015.07.13: i've added an 8quot; prop version. i made the walls 3.5mm by default...

thingiverse

free

Diatone Tyrant 215 Front Camera Mount and WS2812 LED Mount. by footoed

...more pictures when i finish mounting it to my quad ...

thingiverse

free

DJ Stage Setup by Blom_Productions

...in the setup: moving heads: fun generation picobeam 30 quad led led bars: varytec giga bar pix 8 rgb...

thingiverse

free

FPV racing frame A244 by G_Bonatti

...googles from banggood or quantum v2 from hobbyking) whole quad cost me: about 110$ for the quad without fpv...

thingiverse

free

Quad Sillcock Key by gabrielkrell

...i have tried to recreate the keys sold for $6-8 in hardware stores and online. this one includes 1/4",...

thingiverse

free

Pignon 48 dents pour vélo - filetage standard France by Electronlibre

...filetage standard france by electronlibre thingiverse salut, fabrication d'un quad en cours à partir de 2 vélo btwin, 1...

thingiverse

free

Knuckle H-quad with walls for 10mm booms by Mei

...happy with these though) prop: http://hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=25815 board: http://hobbyking.com/hobbyking/store/__49254__hobbyking_kk2_1_multi_rotor_lcd_flight_control_board_with_6050mpu_and_atmel_644pa.html battery: http://hobbyking.com/hobbyking/store/__832__turnigy_2200mah_3s_20c_lipo_pack.html ps. mount for gopro in the works. just gotta...

thingiverse

free

T4 Quadcopter Body - Split by Tdangerson

...the full size version isn't printable on a basic 8quot; entry level printer. well, it wasn't printable; because now...

thingiverse

free

Micro Quad LED Race Gates by Moddersunited

...tubing. 8 200mm lengths required 3m led fairy lights: https://www.ebay.com/itm/3m-30led-3a-battery-operated-string-lights-silver-wire-xmas-party-decor/20169725860?sspagename=strk%3amebidx%3ait&var=501479675183&_trksid=p2057872.m2749.l2649 ...

thingiverse

free

Arrowhead Quad Copter FPV Frame by VooDooMoN

...batteries. the arms can be 1/2" wood or aluminum; 8quot; long. (i went with wood) i am using (and...

thingiverse

free

3/8" Tiny Whoop racing gate base for EL wire/neon rope by mattkins99

...technically you could use this for other types of quad, but i wouldn't go any bigger than a babyhawk....

thingiverse

free

My SMARS Quad by vince_palleschi

...down for bringing the 8 volts of the two 1850 li-ion batteries in series to 5v, more acceptable for...

thingiverse

free

x300 Quad by Johnny1070

...escs any flight controller utilizing cc3d/naze32 size. gps (optional) 180-3000 mah 3s-4s battery. camera and vtx of your choice,...

thingiverse

free

Hero 8 Mount for Budget Basher (Hecate5 frame) 10° tilt by RCwithAdam

...mounting screw pattern on my budget basher 5" fpv quad (built with the hecate5 frame). it fits the gopro...

thingiverse

free

Quad track outer curve rail Ver.2 for PlaRail by hjfuji

...please refer to the youtube video for details.https://youtu.be/a0bbglurteg プラレールの複々線外側曲線レール改良版です。 以前に作ったものは1周を16分割していましたが、今回のものは8割になっています(通常の曲線レールと同じ)。 ...

thingiverse

free

HyperQuad by george_rap

...at least 140*140 mm. the model also requires 8, 8m outer diameter, carbon tubes. the quad is designed to...

thingiverse

free

Blade MQx 180QX Motor Thrust Adaptor by odie_wan

...of each motor towards the center line of the quad this gives a bit more stability and a bit...

thingiverse

free

GoPro Hero 8 RollCage ND Filter - Diatone Taycan 12 Deg by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. you can find me on...

thingiverse

free

GoPro

...this mount system! material: sainsmart tpu gopro #gopro_mount #hero_8 #avantquad #avant...

thingiverse

free

Scythe Motor cover for UDIRC 816 quad copter - protects your delicate wings by cichonj

... tightened the slot to fit tighter and prevent wobble, and strengthened the radial arm by 1 mm in width to give it more strength.

thingiverse

free

GoPro Hero 8 Adjustable Mount v2 With or without ND Filter - baseplates for Diatone Taycan Alpha Monster DMR Thunder and Hyperlite Glide by FlyHighFPV

...altered or something different entirely, i love doing custom quad parts, remixes, and prints. i'm currently on a mission...

thingiverse

free

Raspberry Pi NAS quad SATA RockPi quiet n cooler by ichwarsnicht

...= 56 lv2 = 57 lv3 = 59 after 8 hours idle cpu 52, hdds 37 32 35 37...

thingiverse

free

Quadcopter Design by Arma

...other parts. the two tubes are 10 (od) - 8 (id) cf tubes. i didn't want to cut tubes...

thingiverse

free

Q8 Dracula by Juhaur

...this is nr 8. there is a lot of quad designs out there but most are still the x...

thingiverse

free

QAV-R GoPro Mount (25°, 35° and 45° STLs included) by Dahlphin

...against a lipo. it visually looks great on the quad and i hope it is of good use to...

thingiverse

free

Power Button Cover for Hystou fanless Mini PC by jschievink

...rubber foot as a guide. mini pcs in question: https://aliexpress.com/item/hystou-quadcore-n3160-fanless-mini-pc-windows-7-8-10-dual-lan-nics-wifi-pfsense/32804129552.html?spm=a2g0x.10010108.1000016.1.27e72678pexjmi&isorigtitle=true ...

thingiverse

free

f105vZz qudcopter by crysis_ps

...by crysis_ps thingiverse this is the frame for home quad 105mm diagonal. you can use hubsan x4 board and...

thingiverse

free

Large quad offset angled fidget spinner. by MNicky008

...23-2rs-walk-behind-snowblowers-jackshaft/dp/b01j8921cs/ref=sr_1_2?ie=utf8&qid=1495816678&sr=8-2&keywords=bearing+1623

thingiverse

free

Foldable FPV Quad Copter - PBC350v1 by Nikke

...handy power distribution board. devo rx701 receiver immersionrc/fatshark 250mw 5.8hz with a small aomway camera. various lengths of m4...

thingiverse

free

Axiom 250 Quadcopter by jsnodgrass

...narrow (8) zip tie, 8" (2) self-adhering velcro strap, 28mm (1) 2mm hex driver...

thingiverse

free

Dol_110_RC_Q by Makenlar

...dol_110_rc_q by makenlar thingiverse tiny quad 110 size easy to print and fly parts list:...

thingiverse

free

Mini Quadcopter hold-down by muidaq

...are suitable for 12mm velcro straps. harbor freight case: http://www.harborfreight.com/tool-storage/part-storage/8bin-portable-parts-storage-case-93927.html velcro strap style...available many places:...