thingiverse

free

40mm Fan shroud noctua optimized by tbcustoms

...fans but it should work well with any other 40mm fan mount it on the output side of the fan with the letters out facing outwards

thingiverse

free

Anycubic i3 Mega Bowden Fan Optimization 40mm - SILENT by Meganudelauflauf

...rew din912 m3x5 mm (any-frame) 2x screw din912 m3x10 mm (duese - rahmen) if there are any questions feel free to ask! greetings

thingiverse

free

Gear VR 40mm Fan Mount - Removable - optimized for S6 by patyx

... are moving when adjusting the focus. the uploaded stl's are improved version, so they might differ slightly from the photos.

thingiverse

free

Hypercube e3D 40mm fan mount by cube0712

...fan mount by cube0712 thingiverse this is an airflow optimized 40mm fan mount for the hypercube. it's perfect for...

thingiverse

free

AM8/2020/2040 MKS Gen 1.4 Airflow-Optimized Open Body Case and MOSFET Mount W/40mm/60mm/80mm Fans by KadenShayden

...3 bolts, but i just used zip ties on the 60mm fan and 4 16mm bolts on the 40mm fan. this design works great and has been tested.

thingiverse

free

Cetus3D 40mm Fan Duc-Air distribution optimized by Zong200k

...he software when printing. if you don't have a longer screw, you need to remove the metal barrier on the outside of the fan.

thingiverse

free

Small Can by vitaly12

...thingiverse only a small can, diameter 60mm, height 40mm. optimized for 3d...

thingiverse

free

E3D v6 40mm Fan duct by Space_Badger

...e3d v6 40mm fan duct by space_badger thingiverse added a small angle on the side cooling ducts to optimize airflow

thingiverse

free

40mm spool bearing for PVC pipe by dhg864

...it, if you need other dimensions. current version is optimized for a 0.39mm layer...

thingiverse

free

Nema 17 40mm fan by HPPAVILIONG7

... by hppaviliong7 thingiverse to optimize the cooling of the stepper motor you need to use heat sinks.!!!! tested and printable

thingiverse

free

CR10 E3D v6 CFD optimized cooling duct v1.2

...thingiverse --- changelog --- v1.2 (bugfix): more space for 40mm fan v1.1 (bugfix): missing holes for 40mm fan v1:...

thingiverse

free

Sovol SV01 Fan Mount

...a new fan mount for the sovol sv01 with optimized airflow direct to the nozzle. print it with the...

thingiverse

free

Half Duct for 40mm Props BR0703 BR0705 by SkyTroll

...by skytroll thingiverse print in nylon for best results. optimized for 0.2mm nozzle supports required, but only at the...

thingiverse

free

40mm Supportless, Directed Cooling Fan Duct for MendelMax & Prusa by AeroMonkeyDork

...oling flow across the width of the gap. it also gives more directed flow toward the printed parts at the end of the print nozzle.

thingiverse

free

K8200/3Drag E3D v6 HotEnd extruder mount for 40mm fan by Area51

...duct snap on reusing original extruder screws and spacers, optimized for robustness and easy print. this is a remix...

thingiverse

free

40mm Fan Duct for E3D Chimera by JacobMakes

...fan that comes with the e3d chimera! designed and optimized for the voron corexy but is universal with about...

thingiverse

free

40mm wheels by kylemartin101

...shaft - perfect size for motor shafts. i have optimized this design to use a minimum amount of printing...

thingiverse

free

Double 40mm Fan Holder for MKS Gen 1.4 by Brignetti_Longoni

...inal to fit 2x40mm fan for optimal driver cooling. it fits also larger driver cooling heatsinks. installed on our folgertech ft-5

thingiverse

free

EDF 40mm by Ares566

...s 120 grams of thrust on 18 volts. impeller in action video https://www.instagram.com/p/bitsczagh4n/ https://youtu.be/slvqkx39sl8

thingiverse

free

Raspberry Pi 3 40mm fan case by jHit

...rint fine without supports, but it's recommended to add them for optimal ventilation. model doesn't need supports at all.

thingiverse

free

40mm Fan Guard by KDiDP, the great slayer of penguins. defender of shad.

...looking for a smooth finished product. anybody's suggestions for optimized print settings are welcome. enjoy! :) if your looking...

thingiverse

free

Printrbot Fan parts for Direct Drive Extruder by in_the_garage

...brooke drumm's simple laser cut source files to be optimized for printing and easy...

thingiverse

free

Nerf Stryfe Jam Door with 40mm Fan Mount by flemdogmillionaire

...u need airflow the most, such as by the motors. for wiring, you can hook this up to the rev trigger circuit or a separate switch.

thingiverse

free

Shure MX412/418 "Presidential Mic" Clip (40mm version)

...neck into the opening on either side then slide the clip up below the base of the mic capsule for best results. holds them nicely

thingiverse

free

Kossel/Delta linear guide Carriage by kirill91

...with m3 screws for more resistant held on belt. optimized cones for igus kbrm03 rod end. distance between rods...

thingiverse

free

Small cup with a spout

...the versions have a 30mm diameter. this model is optimized for cheap and fast 2 layer printing fusing a...

thingiverse

free

Kossel/Delta linear guide Carriage & Support for flying Extruder by kirill91

...with m3 screws for more resistant held on belt. optimized cones for igus kbrm03 rod end. distance between rods...

thingiverse

free

MPCNC MK8Extruder Ringfan by kleingeist

...too much. updated with a 40mm fan version and optimized airflow. updated with a 40mm fan b variant that...

thingiverse

free

Pocket Operator 40mm Topspeaker by snackfart

...for your po, if needed, you have solder the speaker to the speaker pins on your po, more infos at:http://hackingthepo.weebly.com/

thingiverse

free

Malyan M180 PLA Blower V2 by acefx

...for malyan m180 or freesculpt ex2 - v2, with optimized airflow and new circular air outlet. note :pictures on...

thingiverse

free

Dual 40mm Fan Mount for Mini Kossel by Basjohan

... mini kossel. i made it double to mount 2 fans at a 120 degree angle. update: made a cutoff to allow easy fitting around hot end.

thingiverse

free

FT5 Titan Aero claw part cooler by 3DE2016

...printed in silver pegt with good results. wall thickness optimized for .6mm nozzle print speed: 70 print temp: 255...

thingiverse

free

Odroit Extended Case Cover by eerikkarts

...self. model made from original odroid case, little bit optimized for 3d...

thingiverse

free

Extruder and filament cooler for Wanhao i3 mini with mount

...remix of eipionezero model for e3d v6 cooling system optimized for mounting on i3...

thingiverse

free

E3D v6 40mm Fan duct one sided Fan by ArranGaming

...lity of the wire side. also made an adjustment to the front to allow more of visibility for the hotend. doesn't need supports

thingiverse

free

Motorcycle Handlebar 40mm Riser for 28mm diameter pipe by Scorpion

...e picture it shown upside down - 3d printing orientation if you need such thing for other diameter - please feel free to request.

thingiverse

free

E3D V6 Aerodynamic 40mm Fan mount by Br4ndosaurus

...nes to optimize flow for the heatsink, and use the high compression turbines for the "twin tornado" print cooling fans.

thingiverse

free

Layer cooling fans (2x25mm) For TEVO Tarantula by mala04

...cool down layers.https://www.youtube.com/watch?v=2pvu3lcia8q&feature=youtu.be i designed it to be as optimized as possible for my taralu x carriage and my...

thingiverse

free

40mm cooling fan duct for Prusa i3 Rework with J-Head by Gravity1337

...improved print quality quite a lot and i haven't optimized my print settings...

thingiverse

free

Fan support for RAMPS by ostatu

...y. for 40mm fans note that this thing is optimiced for geetech's prusa i3 so its thought to fit with its holes and obstacles

thingiverse

free

40mm extruder cooling fan by erossman

...zations by me. the wonderful cad work on these were provided by my friend eric d., as he is so much faster at cad work than i am.

thingiverse

free

Ender 3 Y Axis Motor Standoff 40mm Fan Mount by zuberio

... appropriate length m3 screws (m3x12 in my case) & use a ziptie to secure in place. take note that this mount is directional.

thingiverse

free

Ikea office desk cable cap flap Plug with and without clearance for cables by BenderV2

...caps - one is fully closed and on is optimized to fit same cables through (40mm wide slot). the...

thingiverse

free

Extruder barrel cooling duct for MK5-6 by MakerBlock

...it's not really an easy print and wasn't exactly optimized to avoid overhangs. that said, i printed it with...

thingiverse

free

External Heated Bed Mosfet module mount (HA210N06) by S3bape

...fan mount included. 24-06-2017 - v2 version added - optimized fan mount placement and fan mounting holes...

thingiverse

free

Bullseye fan duct for 20mm deep fan (noctua etc.)

...ics engineer. i just made it a bit longer. it still appears to work totally fine but may not be optimal if you like naval gazing.

thingiverse

free

E3D V6 Supercooling by Br4ndosaurus

...on full power the print cooling fans put out so much air it they down the heatblock! i only run mine at full power for bridging.

thingiverse

free

Prusa i3 MK3S sliding PSU holder

...k together with a weak vacuum. reason the original psu holder for the prusa printer enclosure isn't compatible with the mk3s.

thingiverse

free

Compact micromanipulator by BDan

...ne and material (0.35mm nozzle and pla-pha). in the sketchup model you'll find the assembly instruction in the layers window.

thingiverse

free

Optimal Extensions for Transmitter - E010, Makerfire, H36... by JKSniper

.... :) edit: 5 different pilots have this extensions and confirmed that this is actually the best size. happy flying! jure korber

thingiverse

free

Fully printable Dremel table saw by nikolai2111

...t the dremel it does the job pretty well. please leave comments to improve this thing. for the assembly instructions scroll down.

thingiverse

free

Micro Swiss Direct Drive Cyclope Fan Duct by DannyGi

...xtuded filament. the design of 40x40mm fan duct is for optimize the air flow to the extruded filament let me know in the comments

thingiverse

free

Cyclope afterburner tri-fan by DannyGi

...swiss plate. i'm thinking of a version with 50mm fan for extruded cooling mounted horizzontally to the bed. work in progress.

thingiverse

free

Fan Plate - Inventables X-Carve by stevenholland

...40mm, 50mm, 60mm, or 70mm fan (with countersink) but optimized for a 60mm fan. it attaches to the electronics...

thingiverse

free

iPhone 6 Telescope Adapter by Wayne91

...reworked to bring lens closer to the eyepiece. 2018-07-18: optimized design for easier printing. 2018-07-20: updates with improvements from...

thingiverse

free

PrintrBot Plus 1404 Dual Extruder Fan Mount by Bailey5531

... don't line up try mirroring the model and print again, this can be due to the carriage being assembled slightly differently

thingiverse

free

Dual Jhead Bowden Cooling mount by chanyote66

...r rail to head (z) fan sits over top rail for optimal clearance in all directions this will work best with a 40mm high speed fan.

thingiverse

free

Flat Case for RAMPS 1.4 Mix & Match Edition by Yvan

...be printed flat, one at a time. these new optimized parts all fit and swap around with the original...

thingiverse

free

40mm fan cooler mod (for the duplicator i3 plus, the new 2.1's and possibly others) by Myanc

...imported to different slicer programs. this model is not optimized in anyway. it was a crude mock up of...

thingiverse

free

M2 FPV Cam holder by Wildpix

...distance between standoff and cam hole (m2) is 10mm optimized for m2 standoffs with 3,2 - 3,4mm outer diameter...

thingiverse

free

Grolsch Beugel Beer BIKE HOLDER by renzovonk

...olt sports bottles fit but the shape is not optimal. the shape is modelled to fit the fit the grolsch beugel beer bottle tightly.

thingiverse

free

40 mm fan guard/guide by bbo

... version in only 40mm friendly, i will parameterize the scad and publish it if there is enough interest in that level of control.

thingiverse

free

Honey Comb Fan Grid for 40mm cooling fan by nitram3x3

...may be considered to go with it. it is optimized for 0.4 mm nozzle, with most structures of the...

thingiverse

free

LED Hinged Light Bar for Fang Mod and 40mm Fans by SCS_TeamRocket

...avoid pinpoint light reflections it is one single part, optimized for easy 3d printing after many iterations of design,...

thingiverse

free

Prusa Mk2s two-piece filament guide by DockGuy

...part to work with a top-mounted lcd panel and optimized the part thickness to print rock-solid. i also added...

thingiverse

free

E3D v6 40mm Fan duct with Layer Fan .tiny by Aynareth

...with other hotend additions i´m working on. updated and optimized geometry. 08/01/2017 a tiny updated version with improved airflow...

thingiverse

free

Anycubic Kossel Trigorilla Stepper Cooler by PedaBot

...2x 40mm for cover mount v1: deleted v2: deleted optimized air-input and output v3: deleted +hole for fan-fixing (m3...

thingiverse

free

Raspberry Pi 7" Cover Mod by Capdo

...20-40mm/s as a result i wanted to share my optimized cover with you. the original case is this...

thingiverse

free

Anet A8 - Duet Wifi / Ethernet with Mosfet and 80mm Fan Mount by garv3

...ure no wires jam the fan. last but not least you may add a mosfet for the bed heater to it which is placed on the left hand side.

thingiverse

free

Exoslide Titan Extruder Mount with BL Touch

... for the 2040 you'll need 12 m4x12 (extruder and timing belt retainer), 2 m3x8 (bl touch), and 2 m2x8 (fan mount) cap screws.

thingiverse

free

Tenlog TL-D3 BMG Clone Extruders by andrewseago

...fan duct is modified from @davinci2000 "e3d v6 cfd optimized adjustable part cooling duct" https://www.thingiverse.com/thing:3590464 you will need: 2...

thingiverse

free

brushless whoop 64mm by a768phoenix

..."64mm brushless tiny whoop" by thatdonfc (https://www.thingiverse.com/thing:2303314). i have optimized the motor mountings and the propeller guard for milling....

thingiverse

free

SDX's Double CR-10 Stock Fan by SDX

... fit tight. screw on the 40mm fan and (optional) the front plate (the bottom holes are not optimal placed... i used cable straps)

thingiverse

free

Robo3D R1 E3D V6 Double Fan Super Cooler by 3DNG

...super cooler by 3dng thingiverse new 2018 model, heavily optimized for abs printing. model with custom .5mm "crisp support"...

thingiverse

free

NEMA 17 stepper motor cooler for 40mm fan (even for helloBEEprusa) by Phineas_Hephaistos

...as this is a standard size. the thing is optimized for easy airflow and has a build in safety...

thingiverse

free

Rigid 2020 Corner Brackets by Hultis

...2020 corner brackets by hultis thingiverse these are carefully optimized to bring as much rigidity as possible at a...

thingiverse

free

Anycubic Delta Trigorilla board mount and cooling tunnel by Ivanmartin18

...with any 40mm fan and the external walls are optimized to give space for the motor connectors. there is...

thingiverse

free

Shelf Bracket - Topology Optimization by mosertim001

...is yet: - original 130mm design stated by vettsepp simulated to hold 50kg hardware: - (4) 3.5 x 40mm countersunk screws.

thingiverse

free

60mm Fan Adapter For Dual Extruder Lion Mounts by morganlowe

...be heavy and is air flow optimized not printer optimized it mounts with 4 screws in the center. any...

thingiverse

free

[CR6-SE] Improved original case 40mm fan duct (remix) by michaelbourque

...4334 if you optimal look and air flow, you can also add this to the out side of the fan:https://www.thingiverse.com/thing:3620191

thingiverse

free

Smart effector/Volcano Fan ducts/mounts for 2 5015 part cooling fans and 40mm heatsync fan by NCNFN3D_Arts

...rds the bottom of the heat sync to help avoid heat creep in an enclosure. so far the version i have been testing works very well.

thingiverse

free

Apple Watch Charging Dock (optimized for printing) by mattjoneswo

...a snap fit (not too tight). ***also works for 38mm/40mm frame also. just place a small piece of 1/8"...

thingiverse

free

Domoticz case - boitier domoticz by peke

...hinner ( 0.3 mm) to allow the vizualisation of the leds status by tansparency. (if the case is printed in white should be nice !)

thingiverse

free

Locust 4" by MantleQuads

... long as credit is given to the original design. please contact me if you are interested in using any of my designs commercially.

thingiverse

free

Locust 5" by MantleQuads

... long as credit is given to the original design. please contact me if you are interested in using any of my designs commercially.

thingiverse

free

Folding CAM blade stops by bitis

...d 40mm for installation aft of the prop holder. they are both 2 mm thick and i recommend printing in a strong material, like abs.

thingiverse

free

Safety Buckle for Children Seat Belt by flux1991

...rks; i don't know if it fits your situation. contribute if you have any idea how to optimize/change something, let me know ;)

thingiverse

free

Anycubic I3 Mega Dual Fan Duct! by Epic3DPrinting

...osition (centered better over regulators). notes: printed in petg at 235c brim build plate adhesion 0.20 layer height infill 100%

thingiverse

free

Anycubic Trigorilla 50mm turbo fan mount for stepper drivers cooling

...inks (those for raspberry pi are fine): on the processor (14x14x5mm heatsink) and on the four mosfets (8x8x5mm heatsinks). enjoy!

thingiverse

free

Hictop Prusa I3 E3D V6 Carriage by odonnellp24

...this firmware is very much a work in progress however will print very well using external software like octoprint/astroprint etc.

thingiverse

free

Generic Parametric Cooling Fan Nozzle by mouseas

...for z. designed to fit a 40mm fan. v2: optimized for customizer, since the design can be easily adapted...

thingiverse

free

Rear Fan Bracket Mod for Biocube 32 by biofish

... will allow the fan to maintain the tank temp to within .5 degrees when combined with a auto-on temp controller like the inkbird.

thingiverse

free

A02 plane C-3D by Stolidus

...plane a02 c-3d (3d creation) manufacturing kit, designed and optimized for 3d printing. easy to print and manufacture, tough,...

thingiverse

free

"golden cone of mobility +1" - trigger point massage tool by widerporst

...ball at the tip - the size has been optimized by several tests - and a holder with suction...

thingiverse

free

Configurable 40mm fan duct / mount for Wade's extruder by AndrewBCN

...arm variations. 25/04/2015: a new v3 40mm fan duct optimized for compact setups, and a z-shaped arm. 23/12/2014: please...

thingiverse

free

Bowden Carriage - BlTouch - 40mm Noctua - ADXL345 - Lightweight by SphaeroX

...- lightweight by sphaerox thingiverse update 7/5/2021 duct now optimized for best airflow (deutsche anleitung befindet sich weiter unten)...

thingiverse

free

e3D V6 Part Cooling Wing 40mm Fan for Heavy Duty Modular e3D V6 Mount by NightOowl

...reliable, i created a mixed version of the original optimized for 40mm fans. noctua or noiseblocker 40x10mm or 40x20mm...

thingiverse

free

CNC Milling Dust Shoe by TiSpace

...a wooden cnc milling machine "dötzchen" from cnc14.de, i've modified/optimized a few features. the most important is the dust...

thingiverse

free

40mm Air Filter w/ Stackable Carbon Cartridge by Sndgjaytr

...rm-fit. only need 2 screws for the fan. feel free to tinker with this. if you made it better in anyway, i would love to use it!

thingiverse

free

D-Bot Titan dual blower fan duct center/offcenter by faekie

...from tekkydave: https://www.thingiverse.com/thing:2613346 adjustable in z direction but zmin optimized for tekkydave carriage. this consumes some space in x...

thingiverse

free

FanDuct_2in1_40mm_E3Dv6 by MoayadH

... the results are amazing. my printing quality improved significantly, i tried it on regular apa, carbon fiber pla, and ninjaflex.

thingiverse

free

InfinityONE - 3d printable Octocopter by xvzf

...escs (i use turnigy plush 12a) flight controller (design optimized for nazam, i use my own fc) battery rc...

thingiverse

free

Geeetech i3 Electronics Cover by rlogiacco

... on one side which is required to accommodate the captive nut. please keep comments flowing, i look forward to seeing your makes!

thingiverse

free

Cl-260 Ultimaker Max carrier belt tensioner for bearing with 12mm outer diameter like most brass, PTFE and POM bearings by ForenSeil

...most brass, ptfe and pom bearings by forenseil thingiverse optimized for 24mm long (or two 12mm long etc.) bearings...

thingiverse

free

Raise3D N2 - Active Air Duct v4 by Firesped

...d v4 side files, v4 is better version. back is designed to fit a 40mm fan. update: 5/17/16 added v3 back to mount the blower fan.

thingiverse

free

Extruder barrel cooling duct for MK5-6 v6 by MakerBlock

...extruder barrel cooling duct. ( http://www.thingiverse.com/thing:8461 ) it is optimized for a 40mm fan, which won't fit inside the...

thingiverse

free

Customizeable Cooling Fan Blades by Triple_S

...lm8uu - igus like - with mount spoolhoder tube to lower rotational resistance (requires two axle bearings) cable clip (anet like)

thingiverse

free

E3D Duct - 40mm w/ Stator Vanes by truglodite

...wind tunnel etc. so the geometry is far from optimized for any given fan. however i did use my...

thingiverse

free

X carriage Loop by Alf_Arobase

...for a proper rigidity. belt attachement position have been optimized to avoid collision with extruder gear (see my extruder...

thingiverse

free

DJI Air Unit Enclosure - Actively Cooled by silverbullet126

...ip off and doesn't restrict airflow through the roof. i've installed this on my test platform, we'll see how it does.

thingiverse

free

Power & Control Box (Arduino Mega 2560, Ramps1.4, ATX-Clone) by dr_delta

...o avoid always loosing them during opening and closing the cover in case of maintenance. (see example pictures at the end) enjoy!

thingiverse

free

Filtration Mask (TPU) by 3dmpro

...nner filter case, through the opening in the mask. this will secure the filter material and seal the openings around the filters.

thingiverse

free

T-Rex Cooler Mk3 (Updated) by Perdurable

...the big advantages of this design are as follows: -optimized cooling area. -massive print visibility increase. -ultra lightweight. -only...

thingiverse

free

CR-10 E3D V6 mount Dual FAN Mesh by chips777

...the same hight as the original cr-10 extruder and optimized the airflow for cooling the filament and not the...

thingiverse

free

INFINITY One v2.0a - 3d printable Octocopter by xvzf

...escs (i use turnigy plush 12a) -flight controller (design optimized for nazam, i use my own fc) battery -rc...

thingiverse

free

CR-10 E3D Mount Modular Hurricane by TheSniper

...end is a direct mount 40mm fan. and imho optimized to keep the hot end cool. the blower assembly...

thingiverse

free

e3d v6 adapter for Monoprice Select Mini V1 by mverive

...es now reworked to allow nuts to be "press fit", eliminating the need for the previous spacer (see 9/13/17 note above).

thingiverse

free

FT5 aero setup for Volcano with partcooler by WalterSKW

...sensors (will post a new mount for the bltouch optimized for the 8.3mm z-distance to the nozzle for both...

thingiverse

free

Udoo Dual & Quad Mini PC Case - Multiple Configuration Options - rev. 2.0 - Updated Nov.28 by engrkris

...- revision 2.0. first release of the new design. optimized for easy printing and active cooling. the number of...

thingiverse

free

Ender 3 Fan Duct - Easy, Powerfull, Lightweight by AcJoker2

...a added (mountet on the fan) 10.04.2021 fan duct 4010 v1 is too short, i don't know why fan duct 4010 v2 corrected this issue