thingiverse

free

Vacuum cleaner nozzle by Tonzade

...cleaner nozzle by tonzade thingiverse vacuum cleaner nozzle for tiny places eg. phone charge port, laptop keyboard...

thingiverse

free

K40 Lasercutter Air-Assist Nozzle by Gountled

...for a 6mm outer dia. air hose. the 4 tiny air holes in front of the nozzle are directed...

thingiverse

free

Karcher FJ6 Foam nozzle to PET bottle adapter

...bigger detergent bottle to be used instead of the tiny original...

thingiverse

free

Tiny Touch Mount for Tevo Nereus by vpruzhan

...mount. i used 0.15 resolution because i have 0.3 nozzle installed for a previous project. i believe that standard...

thingiverse

free

GreebleCity: Burial place for 0.4mm FDM by mardur

...prevents the filament from building proper pressure in the nozzle the material lost to stringing is then missing in...

thingiverse

free

Tiny RTC mount by RCzepil

...a real time clock for my raspberry pi. 0.4mm nozzle &...

thingiverse

free

Nozzle Probe Guide by Steamboat_Ed

...bottom funnel makes a big target to guide the tiny wire into the tip of the nozzle. this would...

thingiverse

free

Grease nozzle by yvanos

...diameter 14,5mm approx, pitch 1,5. i also made a tiny cap to close the nozzle. be careful using the...

thingiverse

free

Nozzle Spanner Handle by moodypoopman

...thingiverse i was tired of changing nozzles with this tiny wrench without enough leverage. also the wrench would get...

thingiverse

free

Very Small knurled container

...small knurled container thingiverse pla any color no supports nozzle :205-220 bed :65-70 can be used for small and...

thingiverse

free

Miele suction nozzle 38mm - 3mm by alabiana

...38mm vacuum and has a 3mm hole vor cleaning tiny spaces or cleaning drawers without emptying them. this is...

thingiverse

free

N scale PIKO coupler and Knuckler - PIKO reduction by svenny

...0.25 nozzle settings (it's working fine even with bigger nozzle. the "standard" one needs one compression spring 2x5mm, the...

thingiverse

free

Cyberpunk 2077 - Keychain by Mkvgz

...thingiverse highly suggest you to use a 0.2 mm nozzle and use 0.08/0.10 (depending on your stepper) for better...

thingiverse

free

Sprinkler for 8mm hose, 1mm nozzle (customizable scad) by tgaertner80

...1mm nozzle (customizable scad) by tgaertner80 thingiverse modified this tiny sprinkler to match my selfmade holidays watering system. with...

thingiverse

free

Iwata airbrush nozzle remover/holder by LeQuackUK

...iwata airbrush nozzle remover/holder by lequackuk thingiverse so those tiny airbrush nozzles that you will drop and spend ages...

thingiverse

free

Remixed nozzle box cards by Chitmaker

...box up to 105%, it made the nozzles a tiny bit eaiser to get in the card but still...

thingiverse

free

Tiny T-Rex with Support (Rebalanced) by mihizzudin

...http://www.thingiverse.com/thing:614067 rebalanced: http://www.thingiverse.com/thing:615875 printed at 0.2mm height with 0.4mm nozzle infill at 35% for better surface...

thingiverse

free

MINGDA Rock 3 Pro Parts Cooler by Pops668

...it go? 5) mount 5015 fan on bracket, install nozzle using a trace of mod podge...think rubbery white-glue! 6)...

thingiverse

free

Thrasher V3 - nozzle adjuster grip by IXLR8EZ

...went and grabbed myself a m2x50 mm bolt, a tiny spacer and a m2 self locking nut. i also...

thingiverse

free

Ender 3 Tool Tower BASIC

...driver hobby holders -nozzle needle cleaner holder -x5 spare nozzle holder -wrench tray -spare parts bin -snip plier holder...

thingiverse

free

Ender 3 Tool holder SIMPLE

...knife holder -tiny flat tip screw driver holder -needle nozzle cleaner -bin for small parts -bin for flat spanner...

thingiverse

free

LED driver box by Old-Steve

...i designed a smaller box. printed in petg 235 nozzle 70 bed, 0.2 layer, 25%...

thingiverse

free

IT Dusters Compu Cleaner Xpert 5mm Nozzle Adapter by elementsoftware

...fit right on. you may need to trim a tiny bit from cutouts as there may be some hangover,...

thingiverse

free

Prusa Mini Compact Toolbox by senzinka

...by senzinka thingiverse a tiny unobtrusive box for my nozzle wiping paper and other small tools. you'll need a...

thingiverse

free

Ender 3 Tool holder by daandw94

...i printed it tool-side down. temperatures: 200/50 degr. c, nozzlebed ...

thingiverse

free

Korg Monotron Carry Case by epideme

...pillar is just a discardable piece to move the nozzle away and give the top of the lock clamp...

thingiverse

free

Caddx Ant Nano tiny whoop pod canopy from 30 to 50 degres with and without fin by AngryDonFPV

...angle on each one. printed in tpu with .4mm nozzle and .15mm layer height. weight from 2g to 3d...

thingiverse

free

Origamix Rabbit earring by Riptide3d

...nape of the neck and printed with a .25mm nozzle .07mm resolution with no supports and made it into...

thingiverse

free

Vase Mode VMT Gothic Phone Booth for Tabletop Gaming

...down) i recommend 3 base layers for a .4mm nozzle extrude at .6mm for a .8mm nozzle extrude at...

thingiverse

free

QZB 85 - Tiny Whoop style quadcopter by HicWic

...a 32mm long fc (or less) optimized for 0.4 nozzle print inplace at 0.15mm layers, 0.4 wall, 30% infill....

thingiverse

free

Ender 3 Tool Tower PRO

...store your ender 3 tools -wire snips holder -needle nozzle cleaner hole -x2 spanner wrench slots -x5 allen wrench...

thingiverse

free

Gap Thickness Measurement Blocks by nBurn

...calibration. notes i printed this with a 0.4 mm nozzle and 0.1 mm layer height. it might also be...

thingiverse

free

MK8 heatblock silicone mold - full nozzle cover

...the bottom nozzle little holes 3 - block the tiny bottom nozzle hole 4 - lay it there for...

thingiverse

free

Tiny funnel for perfumes, fragrances and other small bottles by nachbelichtet

...is only 42mm in diameter and 55mm long. the nozzle is 20mm long and 6mm in diameter. it's perfect...

thingiverse

free

Sihedron rune by juan_004

...on a mingda d2, .1mm layer height and .4mm nozzle but i didn't really like the amount of detail...

thingiverse

free

Funnelmania -customizable funnel by stellarinnovation

...this one in clear petg with a .8 mm nozzle the smaller funnel (40 mm) was the one i...

thingiverse

free

Efficient Spray Can Holder by mlavallee

...print. these only take about 40mins with a 0.8 nozzle and 12g of filament. you need supports, but they...

thingiverse

free

USB C-type dust plug by magonegro

...ninjaflex or any other flexible material and a 0.4mm nozzle or below as this is a tiny thing....

thingiverse

free

Airplane Liquor Bottle Christmas Tree

...bottle. i printed this in pla with a 0.8mm nozzle using a 0.4 layer hight and it took about...

thingiverse

free

Hi-Link HLK-PM01 box by tomazy

...i printed it in petg. i used a 0.6 nozzle but whatever you have will...

thingiverse

free

Pocket Drone FQ777 Propeller Protection by mschiller

...superglue. there are two files - one for 0.5mm nozzle and the second for 0.3mm nozzle. 0.3 mm nozzle...

thingiverse

free

Eachine EV800 insert focus fix by Sebbbb

...left and right) can be printed with a 0,8mm nozzle a tiny bit shorter height: 0,3mm support: yes support...

thingiverse

free

Radius Gauge With Embossed Numbers by jimustanguitar

...so that they'd print more legibly with standard sized nozzle. it's easier to print around fine details than it...

thingiverse

free

sub 3g tiny whoop frame by obelix662000

...the trick is to use extrusion width smaller than nozzle diameter and print walls in 1 line thickness. good...

thingiverse

free

Parametric Microdrone Replacement Frame

...models. printed with 0.2mm layer height with a 0.45mm nozzle without...

thingiverse

free

Tiny Epic Tactics Insert by EriOldMan3D

...print faster and without gap (2 walls with 0.5 nozzle separated player tokens from units separated lantern tokens from...

thingiverse

free

Tapiru bubble tea board game insert by canadiankorean

...up with as the box is tiny. use 0.4 nozzle as the walls are pretty thin two options print...

thingiverse

free

Anycubic i3 Mega (S) Storage Box by matsch3d

...brezzzz because i wanted to have smaller inlays for nozzle, cutter and tiny printed parts. so my remix has...

thingiverse

free

80mm fan dust filter / grill

...a simple 80mm fan dust filter designed for 0.3mm nozzle printing with 0.15mm layer height. it is a tiny...

thingiverse

free

Battletech Bewegungsmodifikatoren

...mm deep if you are using a 0.4 mm nozzle and you want to scale them down, keep an...

thingiverse

free

Tiny keyboard parts by fjkraan

...switch cap is printed top-down with a 0.4 mm nozzle ...

thingiverse

free

IFIXIT Jimmy cover/cap by WAMWAM

...is just about ok. i think having a .35mm nozzle or smaller would be better. the difficult part is...

thingiverse

free

Prusa MK2 Nozzle fan mount by alexfagundes

...but my fan came with nothing to attach that tiny little fan to the heat sink of my nozzle....

thingiverse

free

Eachine TX03 FPV camera mount with double guard protection cover for Eachine E010, JJRC H36 or FuriBee F36 Tiny Whoop mini drones by SxSierra

...the printing is mandatory to use a 0.4 mm nozzle or less in the 3d printer because the insertion...

thingiverse

free

Ultra long and ultra slim vaccum cleaner nozzle (extendable)

...50mm of really ultra slim nozzle (6mm) for those tiny spaces besides the seats sliding rails. the vacuum cleaner...

thingiverse

free

Aldi hand vacuum to Dyson V8 adapter by JorgD

...latch. i use 3 walls and a 0.6 mm nozzle i would recommend using enough walls so that there...

thingiverse

free

E3D V6 Delta bed level switch mount by Old-Steve

...it so the switch just gets activated when the nozzle gets to where i can slide a single sheet...

thingiverse

free

Tiny Whoop Quarantine Gates by smitjoshrov

...215 bed temp: 65 infill: 10% layer height: 0.3 nozzle ...

thingiverse

free

Salt Shaker by silence1337

...printers, too. printed well with 0.15 layerheight and 0.4 nozzle sliced with...

thingiverse

free

Sentinel class FRC SOLID Non-RC

...what this is. you will need a pretty small nozzle maybe .2 to get it to look smooth at...

thingiverse

free

Road Grader by Gophergames

...move you need to print it with a small nozzle at 1 mm layer height, or scale up the...

thingiverse

free

Marble ball box again by marion_3d

...ball that sizes 1,6cm. i had to pause the nozzle and insert the ball at 63% this is not...

thingiverse

free

Tiny Epic Zombies Storage by FStar

...as is. no supports needed. i have used 0.2mm nozzle on a cr10 printer. the material used a translucent...

thingiverse

free

Tiny Tower by armedgeek

...armedgeek thingiverse when printing with fine (0.25mm and smaller) nozzle, scaling down a regular temp tower just doesn't cut...

thingiverse

free

Tacblades_Fast_Test_v1 by Tacblades

...ringing ghosting zits and blobs thin walls (x2 0.4 nozzle width) surfaces horizontal surfaces vertical both axis curves all...

thingiverse

free

Hotend Drill Handle by nebarnix

...you can get online for cleaning out a clogged nozzle you can also get some tiny tungsten wire and...

thingiverse

free

Battery door for Microsoft Wireless Mouse 3500 by NirDobovizki

...with a 0.4mm nozzle, if i had a smaller nozzle i would have probably used it. the door isn't...

thingiverse

free

Inductrix Frame by Mr_Disintegrator

...in abs on my taz 5 with a 0.5mm nozzle the light blue one is the 'thin' frame for...

thingiverse

free

New Ender 3 adjustable endswitch mount by CPS-3

...homing for the first time i noticed that the nozzle was in front of the bed, so i designed...

thingiverse

free

Slim MendelMax multi-purpose clip by cobra18t

...at a time. these were printed with a 0.35mm nozzle and 0.25mm layer...

thingiverse

free

Remixed Map Tray for Tiny Epic Zombies by Jfsknight

...reduced tab tolerances which are now at 0.5mm. the nozzle won't arrive for 3 weeks... the sleeved cards fit...

thingiverse

free

Table tea light by morphygee

...for it. printed the shade with this configuration (k8200, nozzle diameter: 0.5mm): layer height: 0.25 perimeter min: 3 top...

thingiverse

free

Open Cable Chain - reliable print springs by truglodite

...i printed mine in 0.3mm res with an 0.4mm nozzle 0.45mm line width. no infill will be used, no...

thingiverse

free

Tool holder for Wanhao Di3 / Monoprice Maker Select v2.1 by xenz

...to locate any in thingiverse that hold the tiny nozzle drill that comes with it. so i remix evaken's...

thingiverse

free

Roman Fort Paperweight in 1:288 Scale by scherera

...an fdm printer at 0.15mm layer size and 0.4mm nozzle this printout takes 13-14 hours to complete. had to...

thingiverse

free

Trillerpfeife / Whistle "Siemse" Loud! by KamikazeJoe88

.../ whistle "siemse" loud! by kamikazejoe88 thingiverse 0.4 mm nozzle 0.1 or 0.15 mm layer up to 120mm/s inside...

thingiverse

free

Flute Microphone Clip (Thomann t.bone ovid system cc100) by acidbourbon

...keep the clip in place. printed with 0.4 mm nozzle standard fused filament printer. sand/file the tiny clip open...

thingiverse

free

Articulated Dump Truck by Gophergames

...move you need to print it with a small nozzle at 1 mm layer height, or scale up the...

thingiverse

free

Blade Inductrix Frame w/Snap In Battery Mount by Fila_Mentor

...prints so print with no larger than a .4mm nozzle slowly with supports. also, the battery mount should be...

thingiverse

free

Mazda RX-8 - Corner Seal and Spring Box by Slavitom

...and numbered likewise. print as is, with any layerheight, nozzle size up to 1mm. not the final version, will...

thingiverse

free

Tiny Box by Gossamer

...one, 60 on rafted. filament: 2.94mm (checked with calipers) nozzle .4 drive gear: 10.58 not sure why the walls...

thingiverse

free

Lighter level by 3DTSUJ

...and flame adjusters and you can then unscrew the nozzle and inject water (untill find a better fluid) with...

thingiverse

free

Really simple 20x20mm extruder fan mount and nozzle thingy for a Prusa i3 by Sneezy3D

...so i knocked up this one to fit a tiny 20x20mm fan that i could just glue on to...

thingiverse

free

Eachine TX01 TX02 FPV camera mount with double guard protection cover for Eachine E010, JJRC H36 or FuriBee F36 Tiny Whoop mini drones by SxSierra

...the printing is mandatory to use a 0.4 mm nozzle or less in the 3d printer because the insertion...

thingiverse

free

Ice Cream Cookie Container by mgs925

...from the build plate or get moved from the nozzle i recommend using a bit of glue-stick to keep...

thingiverse

free

Another Tri Spinner by RoPa

...just the right size for my printing setup (0.4mm nozzle abs; 0.15 layer height). scale the model up or...

thingiverse

free

Tiny sheep from LEO the Maker Prince (MINIATURE) by leothemakerprince

...and carla did. the next thing you know, his nozzle heated up and his spools started spinning, and this...

thingiverse

free

Fluid Amplifier Block by Gene_Hacker

...a completely fluidic acoustic amplifier. specifications derived from patent: nozzle size is 0.02" x 0.016" and operating supply pressure...

thingiverse

free

80mm chasis fan nozzle and Sunhokey Prusa i4 cooling by mosave

...resolve stepper driver overheating problem. complete solution includes: replacing tiny stepper driver chip heatsinks installed by default with bigger...

thingiverse

free

Nema mounted nozzle cam for direct drive Ender 3 + pi camera

...in the housing too, because i couldn't find screws tiny enough for the camera pcb. i printed this in...

thingiverse

free

RostockMax Dual v5 E3D by bubbasnow

...is required just loosen the two screws on the nozzle that needs adjustment and insert shim between effector plate...

thingiverse

free

The Whoop Coop - 6mm by SkyTroll

...is fine even if you are using a 0.4mm nozzle just change the "line width" or "extrusion width" setting...

thingiverse

free

a|s Tornado v1s (Creality CR-10/Ender 3 Fanduct) by kelokera

...all around the nozzle, so no meter where the nozzle goes, the air will be there. this fanduct was...

thingiverse

free

Raspberry Pi Zero Swivel Case Top(with LOGO!) by billioncash

...will even come out unless you have a 0.2mm nozzle or even smaller! i've tried on a 0.4mm nozzle...

thingiverse

free

Tiny Ukulele Peg Winder Print In Place by Dr4l3g

...are too close, but i print with a 0.5 nozzle it's perhaps that. so i make one from scratch...

thingiverse

free

Pink Floyd The Wall (fixed)

...meaning the bank printed on the bed, and the nozzle then rose up an inch to print the top...

thingiverse

free

BMO Switch Dock by CASS_Designs

...youtube channel: youtube.com/c/cassdesigns?sub_confirmation=1 i printed with low resolution: 0.8mm nozzle with 0.32mm layer height. you might need to scale...

thingiverse

free

Backhoe by Gophergames

...move you need to print it with a small nozzle at 1 mm layer height, or scale up the...

thingiverse

free

Antweight Robotwars Firestorm R/C Robot by alexmordue

...off (or i complete my bigbox upgrade to dual nozzle). you'll need a bunch of other parts they should...

thingiverse

free

Hex (allen) key grips by Thomllama

...can adjust sizing if needed in slicing to accommodate nozzle size and spread.. sizes are 1.5mm 2.0mm 2.5mm 3.0mm...

thingiverse

free

Tiny Whoop Brushless by BdejaN

...is 0.8mm tick – two layers if using 0.4mm nozzle angled struts slots for motor wires. braking duct doesn’t...

thingiverse

free

Roborock S5 Max - raised water nozzle by InToSSH

...this completely fixed the issue for me. i used tiny bit of hot glue on the chamfered edge (be...

thingiverse

free

Gloomhaven Boss: Prime Demon

...it on my prusa mk3 with a .25 mm nozzle for this model are available to my patrons at...

thingiverse

free

Blender Top Filler Cap by herbw

...a food-safe material is printed with a stainless steel nozzle fdm prints contain tiny gaps that could become contaminated...

thingiverse

free

E3D V6 Carriage with Autoleveling and M3 Nut by Tobi97l

...x_probe_offset_from_extruder 30 // x offset: -left +right [of the nozzle #define y_probe_offset_from_extruder 8 // y offset: -front +behind [the...

thingiverse

free

Tapered Ender 3 Hot End Fix by lounl

...i tried to get the filament up to the nozzle it seemed to get jammed. i hypothesized that the...

thingiverse

free

Tiny Whoov FC Lipo Battery Holder by edwardchew

...1s 45c lipo upgrade!https://www.banggood.com/5pcs-eachine-e010-3_7v-150mah-45c-upgrade-battery-usb-charger-set-rc-quadcopter-spare-parts-p-1103569.html?p=dg23031123036201501p micro vtxhttps://www.banggood.com/5_8g-48ch-25mw-vtx-600tvl-ntsc-fpv-camera-for-eachine-qx95s-qx105-micro-fpv-racing-drone-p-1235875.html?p=dg23031123036201501p 3d printer i usedhttps://www.banggood.com/diy-creality-cr-10-3d-printer-300300400mm-printing-size-1_75mm-0_4mm-nozzlep-1085645.html?p=dg23031123036201501p ...

thingiverse

free

Pi Pico Case by marffinn

...other to that matter ) print temp.: 210 c nozzle 0.4 infill: 30% is enough ( overkill ) this...

thingiverse

free

Dyson - Wall mount (single) by TJJPrusa

...the base part. printed on: prusa mini + 0.4 nozzle .1 or .2 layer...

thingiverse

free

Mandelbrot - dual extrusion

...the picture shows a print using a 0.35 mm nozzle printing as shown in picture: i used the flipped...

thingiverse

free

MP Select Mini Scale Model 1:5 - Overdetailed by LolloTheMaker

...shroud added 2 copies of the heating body with nozzle (hope one prints ok) main "tower" is now partly...

thingiverse

free

M8 Hexnut-Flower Fidget Spinner by RoPa

...just the right size for my printing setup (0.4mm nozzle abs; 0.15 layer height). scale the model up or...

thingiverse

free

2 x 2 inch gate post cover by humppanukke

...like a glove. i would recommend using a 0.4 nozzle don't use too much fill, or the orb will...

thingiverse

free

Super simple semi-auto Z-probe for E3D type extruders by jdawud

...a made this z-probe. it just slides onto the nozzle and butts up against the heater block. makes for...

thingiverse

free

Dozer Blade / Räumschild für BTTB BR 250 DR Deutsche Reichsbahn by 0perat0r

...a very fine extruder nozzle. i used a 0.25mm nozzle on my um2 and it printed just fine. of...

thingiverse

free

MPX TwinStar BL/II Servo Adapter for Micro Servos by FZS1_Fazer

...3 perimeters; 25% 3d-honeycomb infill, but the standard 0.4mm nozzle should work fine...

thingiverse

free

Mallet, Weighted Head by hemocyanin

...this was printed on a lulzbot mini with 0.5mm nozzle -- if your nozzle is smaller, the fitment between...

thingiverse

free

RKH Tiny Whoop CNC Carbon Fiber Replacement by junior_maker

...printer is not accurate. i printed with a 0.6mm nozzle (what i had on at the time) and had...

thingiverse

free

Specialized Drill Cases by kendel3d

...has varying hole sizes. i usually use a 0.6mm nozzle for this kind of print with very little infill....

thingiverse

free

Gravitrax - High Speed curve by TJJPrusa

...might be needed. printed on: prusa mini + 0.4 nozzle .1 layer height ironing of top...