thingiverse

free

Quick detachable mount for videocard

... mount for videocard thingiverse the mount can be adjusted both in width and in height. it can be used on different video cards.

thingiverse

free

Detachable Mounting System by HMDesign

...has a hole for 1/4 bolts perfect for camera mounts and the like. you can mount them on the...

thingiverse

free

Gopro SkiPole Mount 16mm Rotatable and detachable mount by TIR

... it dosent crack so easy in below -0 degrees. added some space in this parts, so its easier to attach and detach the gopro mount.

thingiverse

free

detachable laser mount for x carriage by Matt19888

...ncludes a slot for the driver to sit in. the mount itself is designed for a 30mm x 30mm laser. i purchased my 3.5w laser on ebay.

thingiverse

free

Reptile S800 Detachable motor mount by emourant

...ath the carbon fiber plate that they screw into. i designed this in openscad so anyone can grab the source and edit if they want.

thingiverse

free

Easy detachable Speaker mount, angled by Niun

...easy detachable speaker mount, angled by niun thingiverse print settings: support: yes res: 0.2

thingiverse

free

Pegboard Pencil Holder and Mount (Easy Detach)

...o make it. makes would be awesome too. i am going to try to design other stuff for my girls' craft pegboard. happy printing!

thingiverse

free

Detached Screw Mount Ethernet Keystone Port by smysnk

...a textured bottom for mounting using adhesive instead of screws. slide on cover. secure cable with zip-ties using provided slots.

thingiverse

free

Detachable Wall Mount Toothbrush Holder by dstarke

...e with two 2kg tesa powerstrips at the bathroom tiles. p.s.: both designs are made for easy custom front engravings (like names).

thingiverse

free

K8200 E3D v6 mount with detachable airduct holder by SeveQ

...an. this is what my mind came up with. //edit: the airduct is the one from the original http://www.thingiverse.com/thing:267337.

thingiverse

free

Detachable Motor Mount for RC Planes by marcotheboy

...r supply.) it is advisable to print this in abs or pet-g in case the motor gets too hot (these are more heat resistant than pla).

thingiverse

free

S800 detachable Winglet Mount by MoRayCH

...mirror the part in your slicer for a left / right version, if someone has issues with this, i could upload a l/r version as well.

thingiverse

free

Detachable filament spool holder / mount by Skimmy

... bolted into the lever to give it more rigidy. the mounting holes are there. made the lever a little bigger for better fitting.

thingiverse

free

Pringles can detachable wall mount by gashopper

...de parts from pla. if using abs or petg reinforcements may be deleted. i've used polyurethane glue to attach part to the can.

thingiverse

free

Detachable Pedal Mount - Brompton + MKS Ezy Superior by let

...reduce the risk of scratches on the frame. distance of mount from frame can also be adjusted by 'frame_pedal_mount_dist'.

thingiverse

free

Orqa FPV.One - Shark Byte Detachable Mount (Beta) by TheEly

...s://a.aliexpress.com/_mpulro9 -https://www.aliexpress.com/item/32823077143.html -https://www.aliexpress.com/item/33059330785.html

thingiverse

free

Mini Flamewheel detachable Mobius mount by Arakon

...d of course. also sand the small bumps at the front that hold the mobius at an angle, if you find it tough to get the camera out.

thingiverse

free

Nintendo Switch rotating and detachable wall mount (No scratching) by RarePepeMeme

...well so you can seamlessly switch between using a stand and a wall mount settings; printed in green pla 2 mm height 50 mm/s speed

thingiverse

free

TEVO Black Widow Detachable Accessories Holder by dean1walsh

...this is the second mount in a series of mounts that use the same mounting plate. see the detachable...

thingiverse

free

KOBRA Bike Light Detachable Handle Bar Mount by DeepfriedchriL

...although i wish i made the locking notches just a little deeper. i just use a hose clamp to attach the top part to my handle bar.

thingiverse

free

Detachable GoPro HERO 8 mount for GEPRC mark4 by Gregor_11

...hole is on top. camera angle: 20 degrees pla: shells: 3 top/bottom layers: 2 infill: 27% tpu: shells: 2 top/bottom: 4 infill: 26%

thingiverse

free

Detachable GoPro HERO 8 mount for GEPRC mark4 by Gregor_11

...e is on top. camera angle: 20 degrees pla: shells: 2 top/bottom layers: 2 infill: 20-30 % tpu: shells: 3 top/bottom: 2 infill: 20

thingiverse

free

Bottle & Can holder for table mounting, detachable by rebellAubell

...ing'' to the table. the holes in the ''table mounting'' should be bored as to fit the screws utilized. :)

thingiverse

free

C920 mount (for Turnigy Mini Fabrikator v2) by t0bi

...the original mount to save some space. this mount just slides on, both on the printer and the webcam, and can be easily detached.

thingiverse

free

Single Detachable Table Leg Mount (Ford Nugget) by TomGemmell

...ve also made a cap which you glue over the nut slot so it won't fall out (recommend packing out space with some folded paper)

thingiverse

free

Fan mount for Printrbot Classic electronics... by DonaldJ

...fan mount for printrbot classic electronics... by donaldj thingiverse detachable 60mm fan mount to cool electronics.

thingiverse

free

Tissue Box Holder with detachable belt clip and wall mount by sirlee

... and made it a bit more printer friendly, putting in those oval holes to save time and filament. it should print without support.

thingiverse

free

Minelab Equinox 600 800 Telenox Detachable Control Unit Mount

... i made them with petg at .30mm layer height as petg has excellent layer adhesion and heat resistance. i do not use any supports.

thingiverse

free

Ezuhf mount for Futaba 14SG by yoowicked

...futaba 14sg by yoowicked thingiverse a detachable mount for immersionrc ezuhf transmitter only suitable for futaba 14sg. enjoy!

thingiverse

free

Flyingbear Ghost 4S: Fitting retainer by helldar

...flyingbear ghost 4s: fitting retainer by helldar thingiverse detachable convenient fitting mount

thingiverse

free

TEVO Black Widow Detachable Drink/Tool Holder by dean1walsh

...verse this is a detachable drink/tool holder that is mounted to one of the black widow uprights with m4x8mm screws and m4 t-nuts

thingiverse

free

CHAMBERLAIN GARAGE DOOR OPENER WALL MOUNT

... wall mount for my chamberlain klik3u garage opener to mount in the house for the detached garage. attached with a command strip.

thingiverse

free

iPad Wall Mount with On/Off Button & Easy Detachment by Lucas_Beeres

...uot; - scale 100% ipad 3 & 4 0.37" - scale 107% ipad air 0.295" - scale 85% ipad air 2 0.24" - scale 69%"

thingiverse

free

TrakStar TK-109 mount by CGFlyer

...r tk-109 mount by cgflyer thingiverse 2 part mount so you can easly detach your tracker from it. there also a space for a strap.

thingiverse

free

Lifecam HD Webcam Mount by kmanski

...ckplate but the rest of the pieces and webcam are easily detachable. i am still working through to tweak it. feel free to modify.

thingiverse

free

RepRapDiscount Full Graphic Smart Controller Case by PMorel

...rel thingiverse great compact case for lcd easily mountable with 45 degree hanging mount or detachable for flush mount on frame.

thingiverse

free

Yaesu FT-8800/FT-8900 Faceplate Mount by mbilke

...unt by mbilke thingiverse i was looking for a way to mount the detachable faceplate for my ft-8900 and had a buddy draw this up.

thingiverse

free

Case for Raspberry Pi B/B+/2 and Detachable camera mount by likecrashingwaves

...terchangeably with each other, allowing people to make a rig as big or small as they wanted, in a format that suited their needs.

thingiverse

free

Anet A6 integrated autolevel, extruder chain cable and detachable fan by lupus00

... into one: autolevel mount, extruder chain cable detachable extruder fan. sketchup file included for anyone customization needs.

thingiverse

free

Minelab Equinox 600 800 Removable Detachable Control Unit Mount

... i made them with petg at .30mm layer height as petg has excellent layer adhesion and heat resistance. i do not use any supports.

thingiverse

free

Cover iphone5 with bike mount by elbaru

...hingiverse would you like to attach and detach quickly your iphone5 from your bike? this mount is what you're searching for!

thingiverse

free

Snap Large Plastic E-clip by jedkoch

...rge plastic e-clip by jedkoch thingiverse built this to replace a broken clip for the detachable hose mount on a water softener.

thingiverse

free

endmill and collet organizer for AMB Kress 1050, should fit ER11

...thingiverse detachable wall mount for endmills, neodym magnet d8 by 3 not needed but asures safe hold if mounted to the machine.

thingiverse

free

DJI Matrice 200 GoPro Mount by da429boss

...verse attaches to dji quick detach mount on the dji inspire 1 and dji matrice 200/210. built in blender and printed using cura.

thingiverse

free

Camera mount slideable on to the Y-carriage by aneurin

...with a cutout allowing it to be pushed on to the y-carriage, so it can be attached/detached without having to remove the heatbed.

thingiverse

free

Naked GoPro Mount for Beta85x by j1koba

... can easily detachable the case. the fpv camera mount that fits directly onto the beta85x frame. and strap for 3s and 4s battery.

thingiverse

free

Schnapp Dragon VTX Antenna Mount (AXII) by schnappyDesigns

...stom designed mount. this slot in the bottom allows you to remove the antenna from the mount without detaching the ufl connector.

thingiverse

free

Steam Link Hanger/Mount by AndreasGiesert

...reasgiesert thingiverse steam link hanger: all connectors are accessible easy to use detachable with all connectors plugged in

thingiverse

free

LipoHolder1_GDfpv by gendeldee

...ee thingiverse lipo battery holder for fpv quadcopter using 20mm width strap at bottom part of drone. with detachable led mount.

thingiverse

free

Airsoft M4 CQB endcap for quick detach by tann200

...4 cqb endcap for quick detach by tann200 thingiverse this is an airsoft m4 endcap with qd mount. designed for my cqb m4 project.

thingiverse

free

Bath organizer (Wall mount) by koshu

...all the small things the are lying in front of the bathroom mirror. the containers are detachable for cleaning and customization.

thingiverse

free

Detachable Prusa MK3S LCD Supports by ImHumble

...creen. this mount will allow you to quickly move the lcd screen from your printer, to the front of your enclosure, without tools.

thingiverse

free

X525 quadcopter - 10 cm detachable leg by FPVrider

...pm 2.6 case w. damper middle accessory plate battery tray with low voltage alarm case mobius cam, board camera tilt camera mount

thingiverse

free

Rodeo 110 detachable guard by claytonc2001

...these are prop guards designed to work with the mounts iceytee made here>>...

thingiverse

free

MFD Nimbus VTX and Antenna mount by drnut

...h to increase range. to connect both parts, just use a nylon screw. the ring in tbs_v3 is a spacer to make the bottom part level.

thingiverse

free

PCB Holder / Standoff M3 & M4

...holes. the screws are self locking with m3=2.6mm and m4=3.6mm. useful to mount a pcb detachable with 3.5mm flat-hat wood screws.

thingiverse

free

VESA quick-release mount for AOC e1659Fwu Monitor by scottconnerly

...for my desk, and wanted to hang the aoc e1659fwu monitor off to the right, but be able to detach it quickly to take it on the go.

thingiverse

free

GoPro Taut Strap Mount by lilmikey

...trap slots are split on one end and there's just enough flex to slide a strap through. i designed it for my hiking backpack.

thingiverse

free

M2 dial indicator mount by jsc

...bed leveling and end stop setting. clamps onto the x axis gantry and is quick to attach and detach. see instructions for usage.

thingiverse

free

Insta360 Go mount for Source One by ssombra

... printed it in tpu, no supports needed. i guess any other material would work, but i think tpu provides some vibration dampening.

thingiverse

free

SonicModell AR 900 Wing 2-piece Motor Mount by leeph

...with matek 8xled strips and a 19x16 bolt pattern motor. use m3 caphead and/or button-head screws of appropriate length to secure.

thingiverse

free

Quick-Detach LACK-top 12V Power Connector by alahosky

...ver my under-mount filament spool in https://www.thingiverse.com/thing:2614686, and a quick-detach 12-volt power connector below.

thingiverse

free

Orqa FPV.One - Shark Byte VRX Detachable Mount (for closer fit) by hakk4me

...s and to counter the weight issue with additional modules & weighty antennas might be the direction for further improvements.

thingiverse

free

Remix of Cmar's Ring Doorbell Wedge Mount by Cantrell

...tated it slightly, removed a bit of mass, and then cut out an arch on the top and bottom to help me detach it from the print bed.

thingiverse

free

RCX H250 CF Carbon frame handle by micolo

...nting holes. i mounted it in toolbox used to carry my 250 quad easy to attach/detach frame from handle frame is held really tight

thingiverse

free

LACK side panel magnet mount by MrWhitey

...tachable. you'll need some 10mm in diameter neodymium magnets with thickness 2-3 mm. to mount them to the legs use m4 screws.

thingiverse

free

Carry Handle Mounts by purplenova1

... for use on any real firearms and i am not to be held responsible for any damaged optics if you use this on a real steel firearm.

thingiverse

free

E3D’s ToolChanger – detachable spool holder by Skimmy

...p with! update: 2020-08-17: new mounting holes are 2.5mm, able to self-thread with existing mounting screws for the series-model.

thingiverse

free

Pixhawk/APM GPS Mount by Velocirotor

...he base for multirotor transport and storage. stands 80mm tall. let me know if you need more tolerance on the keying in the base.

thingiverse

free

Nidici XF5 30 deg Session Mount by PiManFPV

...ici-freestyle-racing-detachable-quadcopter/dp/b07415y5rw/ref=sr_1_2?ie=utf8&qid=1514856938&sr=8-2&keywords=nidici+xf5

thingiverse

free

Under Cupboard Detachable Spool Holder by NigelWest

...not in use. in addition i have printed several mounts so that my printer does not always have to...

thingiverse

free

Holder for additional floor in (Savic) rodent cage by LamimaGC

...itional floor in a rodent cage (savic). you will need at least 4 of them and the plate is easily detachable but also safely fixed

thingiverse

free

QUADCOPTER SQUARE TUBE LEGS by giek2000

...square tube legs by giek2000 thingiverse detachable legs and mounts for a diy quad. made for 11mm square tube...

thingiverse

free

Orqa - Shark Byte Mount by muhkuh0815

...iece version with more uptilt to be used with 3m dual lock velcro. i left the top hole open. you could squish in some black foam.

thingiverse

free

DELL WD15 Mounting Bracket by Jay8ee

...witter.com/jay8ee/status/1369713915786002432 required hardware: self tapping wood screws 6ga x 1" m2.5 x 16mm machine screws

thingiverse

free

(Final) Oxygen Therapy Bubbler Mount by SurgeFF

...r and easy to detach. example oxygen therapy kit:https://www.amazon.com/dp/b0924kb83q?psc=1&ref=ppx_yo2_dt_b_product_details

thingiverse

free

Pegboard Peg for Detachable Designs

... so they do not snap when bent. sometimes requires a skirt so they do not detach if the first layer adhesion is not good enough.

thingiverse

free

Goby 210 FPV Quadcopter and RunCam 2 Mount by clobybar

...erse designed for the rmrc goby 210 quad with runcam 2 detachable. pla .1 layer height (.15 initial) .8 wall thickness 20% infil

thingiverse

free

Slide Mount by jpcw

...wall with double side tape or screws and the other to the object you want to mount. then you simply slide them together or apart.

thingiverse

free

Transcend Drive Pro 220 Dashcam, adjustment mount by Dyason

...gate vibrations. this makes attaching and detaching the mount more difficult but makes it more secure and with fewer vibrations.

thingiverse

free

Glock Front Rail Strap Mount by benawhite

...n from the front, but it doesn't slide back off very easily. the best was to attach/detach the mount is from the side. enjoy!

thingiverse

free

8mm magnet holder mount clip by bjburns13

...man mask i printed so that i could detach the mask easily. can be used for a ton of parts that need to be routinely disconnected.

thingiverse

free

Hercules webcam holder and eye for InMoov by kwatters

...uilt with a 180 degree fisheye lens. ( http://www.amazon.com/onegood-detachable-degrees-camera-iphone/dp/b00k11vlme/ref=sr_1_4 )

thingiverse

free

FLSUN Q5 Hotend Light Holder by SmileyMan3D

...used 4 x 6x2mm n52 neodymium magnets to mount. mounts to level sensor location (just detaches same as level...

thingiverse

free

C270 WebCam Monitor Mount for Dell Monitor by blyefd

...to the monitor. squeezing the webcam holder part together will easily allow the mount to be attached or detached to the monitor.

thingiverse

free

DJI Digital FPV Air Unit and Camera mount

...external mount by brett and combined with the antenna mounts from this air unit mount by flynn203 from...

thingiverse

free

GoPro Magnetic Mount by gtsianak

...ch the mount from where it's placed the magnets tend to stay where they 're stuck to) i suggest to print with 40% infill.

thingiverse

free

Joey Electric Folding Bike Water Bottle Mount by blakehaas

...ny frame that is circular and ~19mm in diameter. bike can be found here: https://www.ridescoozy.com/collections/all/products/joey

thingiverse

free

Jumperwire Holder by nikolai2111

...holes and mount it with screws. it has 20 slots with a width of 2mm in a interval of 5mm. the holder is 145mm long and 38mm wide.

thingiverse

free

FGC-9 adjustable butt stock by Untangle Remixed for Oculus Quest by slykittycat

...quick detach sling swivel mount https://www.amazon.com/gp/product/b07bqnmhth/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=utf8&psc=1

thingiverse

free

Bicycle Helmet BT-S3 Bluetooth Intercom Mount by HLMAX

...torcycle helmet version, bt-s3, for the purpose. it can be easily attached and detached from the helmet with the supplied velcro.

thingiverse

free

Enclosure for 2 Rocker Switches by dhoefle

...nt. the whole system fits perfect on the edge of a lack table. ideal for 2 switches, one for lights, one for powering the printer

thingiverse

free

JTech - MPCNC Magnetic Mount by sfidler

... mount to the back of the laser and wait for the glue to dry. the laser module will easily attach and detach from the tool head.

thingiverse

free

Martian 3 Cannopy (Multiple Versions) by -N-

...le runcam-mount al versions without the need to add standoffs fully closed version to protect electronics for out side influences

thingiverse

free

450 size quadcopter by mosteveo

...k in progress. there is a complete version, and sections that are broken into smaller portions for printing. print with supports!

thingiverse

free

QX95 LED Strip Mount by JBFUK

...s the usb port. initially designed something more fancy but had a re-think; this is simple and lightweight. weight 0.13g in petg.

thingiverse

free

Vive Stock by hapteck

...eir magnetic fields are modified so that twisting them 45 degrees makes them repel. which is how they detach from the mount here.

thingiverse

free

DJI Spark Propeller Guards with Lock System by youngwing

...rs. aids flight safety, protecting people and objects from spinning propellers. small, lightweight, easy to mount, and detach.

thingiverse

free

Toothbrush holder Oral-B by ploebb

...th slide-on mechanism for easy detachment for cleaning. just stick the small attachement part to the wall with double sided tape.

thingiverse

free

Roku 4 Fan Alternative by bubbax

...aching the mount from the roku. the original roku 4 fan uses 5v and seems adequate but 12v is available (from the dc power jack).

thingiverse

free

Removable Motor Mount by sciguy987

...apped or just threaded using the screws themselves. i've also uploaded the raw inventor files if anyone wants to modify them.

thingiverse

free

iPad carmount - variable positions by Mc_Orkel

...r the bit on top. the thread is a pretty tight fit. you might have to "work" the screw into the thread. happy printing!

thingiverse

free

10mm LED Strip Light Mounting Bracket by Mframe

...ts at the ends. the adhesive generally works well but these keep the ends from peeling up when you attach/detach the power cord.

thingiverse

free

Wind Turbine by BorticusMaximus

...se with a slot for routing the wires out the bottom. i used the original versions of the motor mount and the bottom of the tower.

thingiverse

free

Prusa i3 MK3S sliding PSU holder

...k together with a weak vacuum. reason the original psu holder for the prusa printer enclosure isn't compatible with the mk3s.

thingiverse

free

MendelMax 1.5 Z Endstop Holder by snc5178

...this to work on the mendelmax for the motor mounts that have detachable legs. simply remove one of the...

thingiverse

free

Turn signal cover for Kawasaki 1700 by italymaker

...signals. just a little to ensure the hanging, not too much to be able to detach it if you should need to replace the lamp inside.

thingiverse

free

Spool Mount Holder for Vertex K8400 Printer by 1D2D3D

...the printer doesn't consume so much space cause the mounts can be detached quickly. caution! i'm just printing the...

thingiverse

free

GoPro Adapter for Lumina NiteRider Bike Lamps by Vince_Prints

...ou will need to remove the screw for charging as well). i have attached the .stp files if you would like to customize the design!

thingiverse

free

Lock for Husky 12 in. Stackable Click Bin by thinkb4print

..., scale it up to 101% or 102%. link to the binhttps://www.homedepot.com/p/husky-12-in-stackable-click-bin-gray-17193662/202931357

thingiverse

free

IPHONE 12 MAGSAFE CAR MOUNT (ONLY ADD) -15MM BALL by kellersing

...agical attach and detach experience every time, while charging at the same time. 【only work with magsafe phone case if necessary】

thingiverse

free

Mobile Smartphone Holder VW Phaeton

...he smartphone. my phone have on backside an steel sticker magnets are 10x2 mm magnets are sunk 0.5 mm, so that no scratches occur

thingiverse

free

Lisam 210 TBS Unify VTX antenna holder by tonda

...emoved without detaching the antenna. also holds a little led strip i found here. side plates/camera holder in the photos here.

thingiverse

free

CR-10 E3D V6 fang addon for Heavy Duty customisable modular mount by bakingam

...fan, so i designed this. i have tested only with the v6 version only, the fang attach to the fixed body with the lateral fixings.

thingiverse

free

IP Camera holder for Makerbot 2 / 2X by RodLaird

...s932 (or other camera in the same packaging). the holster attaches to a mounting bracket for the makerbot 2 / 2x series printers.

thingiverse

free

CR10 Logitech C270 Rotatable Mount by Wassname

...et mount instead. added some extra support for the head in v2, as there is still a degree of wobble, not as bad as it was though.

thingiverse

free

Runcam3 GoPro qav mount by cornonthecobbs

...pace underneath the camera housing for a strap. ignore the scuffs near the strap cavity, i had to wrangle the supports out of it.

thingiverse

free

ImpuleRC Alien DJI Mounting System by Sh4rp

...e part as soon as we get more testing done. v1 (current): tolerances a bit tight, but fits nicely. currently no antenna solution.

thingiverse

free

Faceplate Dash Bracket (2015 Jeep Wrangler) by fangwisp

...ertical) surface, so presumably, you could mount whatever you would like. if you use the design, send a pick of what you mounted.

thingiverse

free

Detachable Z-probe w. magnetic connection for delta printer by robkar

...e a charm. uses the common omron mechanical switch, and six 10 mm magnets. my effector: http://www.thingiverse.com/thing:881793