thingiverse

free

Landing Gear 22XX Motors

...landing gear 22xx motors thingiverse custom landing gear for any motor that fits 16x16 or 19x19 motor mounts.

thingiverse

free

Motor Landing Legs (e.g. for 2306 Motors) by Simongotnews

...motor landing legs (e.g. for 2306 motors) by simongotnews thingiverse .

thingiverse

free

220X motor landing pad by JoeStanFPV

...220x motor landing pad by joestanfpv thingiverse landing pad or slider depending on material used. tested on a 2205 motor.

thingiverse

free

ZMR250 landing legs and motor protector by jturn217

...zmr250 landing legs and motor protector by jturn217 thingiverse landing legs and motor protector

thingiverse

free

Landing Feet for 22xx Motors by carstenheuer

...landing feet for 22xx motors by carstenheuer thingiverse 40mm landing feed for 22xx motors! you need m3 x 10mm srews!

thingiverse

free

Motor Mount Landing Pads by HAAUK

...auk thingiverse this is a generic motor mount landing pad providing 18mm ground clearence. i used this for my emax nighthawk 200

thingiverse

free

[1104 BL Motor] Landing gear by marcelou

... a 4 parts landing gear for 1104 bl motors. it's screwed directly on the frame thanks to motor threadings. one part by motor.

thingiverse

free

DALPROP DL220 motor protector + landing skid by Chuck314159

...dalprop dl220 motor protector + landing skid by chuck314159 thingiverse for 22xx motors!

thingiverse

free

Simple CJMCU 7mm motor landing skid by httpneo

...ng skid by httpneo thingiverse simple and lightweight landing skid for 7mm motor like hubsan height 12mm perfect für cjmcu build

thingiverse

free

landing gear and motor guard for Mantis85 by mcooz

... gear for the mantis 85 quad. prints with out supports. only made one end use cura to make a mirror image for the opposite sides.

thingiverse

free

DT750 Motor mount with optional landing gear by robhsaunders

...inum arms. the motor mounts with small wire ties and you can also add the landing gear that mounts to it with wire ties as well.

thingiverse

free

1306 motor skid/landing gear by MatthijsJordense

...ear by matthijsjordense thingiverse perfect landinggear/skid for a small sized quad, designed for a 1306 motor with 2mm screws.

thingiverse

free

Quad Motor Mount with Landing Gear for Fusion Quad by gustofusion

...stofusion thingiverse this is an alternative motor mount with built in landing gear all as a one piece unit for the fusion quad.

thingiverse

free

Brushed Sparky v0.2 landing gear and motor cup by peabody124

...rky that also serves as a landing gear. the mount clips onto the arms under the motor mount. see the writeup on the frame here.

thingiverse

free

One screw motor mount with foldable landing gear by stefanino

...giverse motor mount with foldable landing gear assembled with a single screw. the mount is designed for 14mm outer diameter arm.

thingiverse

free

multirotor motor mount with landing gear by Kezat

...pter tail pivot and the batbone from flitetest.com (with center cross-brace removed) changes: went from 2 to 1 hole in the boom

thingiverse

free

Multirotor Motor Mount for 1/2" Shaft with Landing Leg by MajikSpoon

...mount for 1/2" shaft with landing leg by majikspoon thingiverse multirotor motor mount for 1/2" shaft with landing leg

thingiverse

free

QAV210 motor protector + landing gear by goldendark

...r qav210 - suits 2204 motor - tested with emax + xnova abs : infill 50% + support material great result with 0.4 mm / 0.1mm layer

thingiverse

free

Eachines Falcon 250 Motor Guard with Landing Legs by Handground

...ave enough clearance for the motors on my falcon 250. there are two versions of the file, one with landing legs and one without.

thingiverse

free

Drone Motor-Mount Landing Pad Foot Thingie by damightyj

...otor-mount landing pad foot thingie by damightyj thingiverse screws go through this, then the mounting arm, then in to the motor

thingiverse

free

Armattan Chameleon Ti - Arm and soft Motor mount / landing gear by Smtechmatane

... by smtechmatane thingiverse this an flex protection for the end of the arm and btw , soft mount for your motor and landing gear

thingiverse

free

ZMR250 Motor Guard + Landing by bfboarder

...or the original zmr250 (3mm thick arms)! feel free to change or update for later versions updated version, less weight better fit

thingiverse

free

Motor mount + Landing legs for 10mm square tube by Rop922

...olts. there is a hole on the end of the motor mount so you can run the motor wires through the tube for a nice and tidy copter!

thingiverse

free

Talon V1 / DIY 12mm tube motor mount Landing Gear by phreakmonkey

...t_12mm_tube_ar_warehouse_.html i use those motor mounts on the turnigy talon v1 frame, so i printed this landing gear for them.

thingiverse

free

QAV250 19mm landing gear and motor protection by mtbox

...ttp://www.thingiverse.com/thing:1023906 by tbraber and http://www.thingiverse.com/thing:970329 by idnarbjm. 14g for the 4 motors.

thingiverse

free

Landing gear for Aurora 90 or similar quadrocopter with 11xx motor by Alex_E

...ight of each landing gear is about 0.4 gramm. attached with stock screws. i use small silicone tubes for additional amortisation.

thingiverse

free

Beerotor 250, ZMR 250 Motor protection and landing feet by tbraber

...mirrored in your slicer. the black soft knobs can be bought from banggood: eachine-falcon-210-250-pro-damping-landing-gear-sponge

thingiverse

free

Diatone Lizard with 1104 motor landing gear by clifton2

...rs. thought i would quickly knock up some 3d printed ones and here they are. about 1.8mm thickness for working out screw lengths.

thingiverse

free

Landing skids for 1104 - 1306 motors (9mm-12-mm mounting) by Irishnick86

...ding skids for 1104 - 1306 motors (9mm-12-mm mounting) by irishnick86 thingiverse made some landing skids for indoor micro build

thingiverse

free

Diatone Tyrant 180 Motor Protectors / Landing Gear by aalbinger

... recently rendered version 3. i've not printed or tried version 3 yet but i believe it will prove more resilient to bashing.

thingiverse

free

Motor mount for 1.25 mm wood with landing gear by hermani

...side braces. the pole itself is hollow to save on weight and because of the cone shape you can print it without internal support.

thingiverse

free

Qav-r \ TC-R220 \ Wizard Motor Guard + Landing Gear by Oragami0

... \ tc-r220 \ wizard motor guard + landing gear by oragami0 thingiverse it's remix from nikita_efor.. i added landing gear ..

thingiverse

free

JJRC X1 Drone Motor Pod Landing Gear by starshep

...ards to the bottom of the motor pods. if you are not using the prop guards, you will need to also intall the prop guard adapters.

thingiverse

free

Drone Motor-Mount Landing Pad Foot Thingie v2 by damightyj

...drone motor-mount landing pad foot thingie v2 by damightyj thingiverse this is the same as the other version, just taller

thingiverse

free

22mm Motor Bracket Landing Gear for Drone

...ince my original design kept breaking). these hold up pretty well and i use them regularly. all in all, a good sacrificial part.

thingiverse

free

brushed sparky motor mount and landing gear by odwquad

... uploaded 2 versions. the original motors have 8,5mm diameter. i also uploaded the step files so you can easy modify the things.

thingiverse

free

Customizable landing skids (mount under motors) by btimby

...washers). source code and revision history in github: https://github.com/btimby/things/blob/master/customizable-landing-skid.scad

thingiverse

free

Hoverthings Flip dihedral motor mount and landing feet by BluefishNZ

...se the standard legs. build log with these used is herehttp://www.bluefish.net.nz/2015/02/flip-sport-build-for-acro-flying.html

thingiverse

free

FireFly Nano QuadCopter 8.5mm Frame 6mm Motor Mounts/Landing Gear by calmabalot

...rofile motor mounts that are very secure and protect the motors. one is for the 8.5mm motor that the frame was intended to hold.

thingiverse

free

ZMR250 anti vibration/landing pad motor mount by FPVpolska

...lska thingiverse please be notes that you adding 2,5mm to the screw length. enjoy :) https://www.youtube.com/watch?v=g5nt_mw51lu

thingiverse

free

Quadcopter Boom , Motor Mount and Landing Gear Fusion2 by gustofusion

...usion thingiverse this is a all in one piece for the fusion 2 quadcopter. its measurements are: x 8.058 in y 3.046 in z 1.498 in

thingiverse

free

Multirotor Landing Gear, 19mm x 16mm Motor Bolt Pattern by Mustang7302

...teries in some frame/battery configurations. the sketchup file is included if you decide to modify the dimensions for any reason.

thingiverse

free

ZMR250 Quadcopter Landing Gear Legs for Sunnysky 2204 Motors by mostlydecaf

...m hole spacing and hex cap m3 screws. test fit perfectly, no modification required. enjoy! designed by my son for his new quad.

thingiverse

free

Quadcopter landing gear 1306 motor 12mm hole pattern by jwolfe138

... make them much stronger, ream out the center hole with a 1mm drill bit (or a #60) and glue in a section of 1mm carbon fiber rod.

thingiverse

free

HK X900 Tricopter Motor mounts and Landing Gear - ReMix - scad source included by shmorgan

...l. http://www.hobbyking.com/hobbyking/store/__39064__hobbyking_x900_tricopter_glass_fiber_multi_rotor_frame_usa_warehouse_.html

thingiverse

free

Quadcopter Landing Gear (also some motor soft mounting) by oxivanisher

.... make sure to not tighten the motor screws too hard. my succession is, to print this in tpu to not destroy it on a hard landing.

thingiverse

free

T-Motor FT5 225 Landing Skids by theronin

...ps://www.thingiverse.com/thing:4600593 modular fpv gopro session mount - session case: https://www.thingiverse.com/thing:4580640

thingiverse

free

TBS Source One Arm Bumper / Motor Antivibration / Landing Gear 0.2 v3 by piaosn

... 9mm screws work well for me. 10mm screws may work as well, but pay attention don't let these screws damage your motor wires.

thingiverse

free

ZMR 250 motor guards / savers with landing foot by SxSierra

..._sxs.stl zmr250_landing_foot_sphere_with_high_motor_guard_sxs.stl zmr250_landing_foot_sphere_with_high_motor_guard_cutted_sxs.stl

thingiverse

free

Atas Defiance 265 front landing skid for 10° tilted motors by liftbag

... find here http://www.thingiverse.com/thing:693423 the 10° motor tilter you can find here http://www.thingiverse.com/thing:710052

thingiverse

free

Zilla LAND SHARK Robotic - Motorized Meccano Lego Compatible by jlsilicon

...uding: meccano base parts plates struts angles , geared motors to meccano and lego conversion - kit parts for additional parts.

thingiverse

free

ZMR 250 landing foot for 1806 motor savers / guards by SxSierra

...tted_sxs.stl and the original top part of the motor 1806 guard (not modified - open motor 25 mm): 1806_zmr250_motor_gaurd_top.stl

thingiverse

free

motorized trailer landing gear 1/14 scale

...t to many problems i can't seem to grasp but eventually i will figure out a good method print the leg supports with supports

thingiverse

free

220x Motor Landing Feet for FPV Drone and Quad (Braap and Steez) by CheFPV

...y low tolerance on purpose. install each screw looslely before tightenign them equally in a rotating pattern. check screw length

thingiverse

free

FT Explorer landing gear and motor mounts by justdave

...glued behind the first velcro slot with a pushrod going back to the rudder servo. use a m3 screw to hold the nose wheel in place

thingiverse

free

landing/sliding gear + soft mount for 19x16mm screw holes [like 2205 motors] by TomaszFPV

...f, your prop wont catch the ground. yes, yes i know my frame is from plywood :] its ongoing project waiting to be cut from carbon

thingiverse

free

H4 680mm Alien Folding Multicopter - Mounting Plate (Motor Mount) for retractable landing gear servos by Barracdil

...ore/__23483__servoless_retract_with_metal_trunnion_33mm_x_35mm_mount_2pc_.html depending on printer holes might be a bit tight.

thingiverse

free

Basic Quad by Gloloph

...included; the motors are copies of a basic 900kv motor ...

thingiverse

free

CineQueen Landing Gear by Aistaca

...mounted underneath the motor arm, bolted together with the motor. there are 2 parts; the landing gear itself and...

thingiverse

free

Diatone #37 landing gear by WMalloy5

...cf frame. will possibly work with any 16x19mm mounted motor. i used the m3x6mm bolts that came with my...

thingiverse

free

Miniquad Landing Gears by Filatech

...it also protects the bottom and bearing of your motor from...

thingiverse

free

ZMR250 Landing Gear V2 with Sloted Holes by Tjm_27

...holes are slotted so they should work for other motor. holes are 3mm...

thingiverse

free

AcroBrat Landing Skids by cdasso

...landing skids by cdasso thingiverse i don't care for motor soft mounts so made these to soften...

thingiverse

free

Quanum WISP 110 Mortor cover and landing leg. by tsq

...110 mortor cover and landing leg. by tsq thingiverse motor cover with landing leg for quanum wisp 110 micro...

thingiverse

free

Quad Drone 8.5mm Motors by etdouglas

...that fits 8.5mm motors. there is a model w/ landing feet and one...

thingiverse

free

Racing/Freestyle Drone landing Gear

...thingiverse very useful landing gear for your racing/freestyle drone. motor ...

thingiverse

free

1306-1707 Landing Gear Mini Quad by Agutierrez84

...quad by agutierrez84 thingiverse landing gear for 1306-1707 size motor. has 12mm bolt centerline and 20mm...

thingiverse

free

Micro Quadcopter Landing Gear by benc101

...are) is 1 mm thick, so make sure your motor screws are long enough for your motor thread. the...

thingiverse

free

8.5mm motor grommets for your micro quads by Sylv77

...ones on my qx 95, they also double as landing pads and protect the bottom of the...

thingiverse

free

Quadcopter Landing Gear by IGotYourDoughnut

...supports the motor hole layout for 19mm x 16mm motor. ...

thingiverse

free

220x motor soft mount by JoeStanFPV

...mount by joestanfpv thingiverse a sliced match to my landing ...

thingiverse

free

FPV Racer Landing gear 22xx by FPV57

...gear 22xx by fpv57 thingiverse flex( tpu) landefüße 22xx motor ...

thingiverse

free

ZMR250 Landing Gear by hpz937

...offsets. i used m3x8mm bolts to attach to the motor on my zmr250 frame. the screw holes are 3mm...

thingiverse

free

T41 Aerobros Landing Gear by nicolasgod

...i designed a landing gear that fit under the motor mounts, i'll upload later on a longer...

thingiverse

free

Race Copter Landing Skits by cornholio209

...use for racecopter 250er create with longholes for different motor ...

thingiverse

free

Gears GT2 for 28BYJ-48 Stepper Motor by Zmei242

...was created for the stepper motor, it has a landing under its shaft. if the belt slips, then increase...

thingiverse

free

MB Epic Landing Feet by DirtyDogFPV

...landing feet for quads. they fit 19x16 and 16x16 motor mounting. i have always hated top mount battery frames...

thingiverse

free

RD290 landing gear set for tilted takeoff by liftbag

...use tilted motors. you can find a suitable tilted motor mount set here:...

thingiverse

free

DJI Inspire 1 Style Landing Gear Feet (NOT COMPATIBLE WITH ORIGINAL) by elvish

...project still in progress this part is the landing skid/motor holder/esc...

thingiverse

free

universal 1000kv quad landing peg (illuminated) by Fully_Retractable

...(illuminated) by fully_retractable thingiverse intended for xl quadcopters 1000kv motor 6mm hole, and chase for led possibly useful as...

thingiverse

free

Simple Multi-rotor Landing Gear by ScottCher

...the zip-ties that hold the landing gear to the motor spars, dissipating energy from a hard landing to, hopefully,...

thingiverse

free

80mm landing gear for 25mm tube clamps by TooTomThumb

...25mm tube clamps used to fix a carbon fibre motor mount on a tube arm. their length was determined...

thingiverse

free

SK450 alternative landing feet by zeus

...found this useful. i added a cable-tunnel for the motor wires. added the scad file for custom...

thingiverse

free

Landing Gear by vivienfrank777

...inventor, 3d printed, connected to an arduino and servo motor and powered using a 9v...

thingiverse

free

X525 Simple landing gear by luisanllo

...simple landing gear. i used one screw of the motor support and for more restraint you can use other...

thingiverse

free

Vortex Arm with Motor Mount by MoD_Doc

...dimple on the bottom to hold a snap on landing ...

thingiverse

free

Immersion RC Vortex 2204/2206 Motor Mounts Bottom by enjoinick

...from:http://www.thingiverse.com/thing:1033206 motor mount bottom with added feet to prevent landing on or damaging...

thingiverse

free

mini quadcopter landing gear by beark54

...desgined by tosjduenfs. it is meant to have the motor base pressed into the arm and down into the...

thingiverse

free

Landing gear flange for quadcopters by charles_linquist

...any quad/hex copter that has 28mm and larger diameter motor. this flange bolts to the mounting holes of a...

thingiverse

free

Armatten Tadpole Landing Feet

...armatten tadpole landing feet thingiverse dont grind your motor screws. use zip-ties to mount on the...

thingiverse

free

Chameleon-Ti Motor Mounts

...motor mounts for the armattan chameleon-ti. i removed the landing gear and thinned out the mount to 2mm thick-...

thingiverse

free

Quad Motor Mount for 3/4 OD Aluminum Tubing Insert by gustofusion

...square aluminum tubing for a cost effective quad copter landing gear/motor mount solution for the diy...

thingiverse

free

Quadcopter Landing Feet by Supermichnix

...thingiverse universal landing feet for quadcopter/multicopter. fit on different motor size: 2204/2205/2206/2305/2306. feet length: 35mm (for graphene lipo pack...

thingiverse

free

TBS Vendetta landing skids/pads by AirPixFPV

...required screws length: m3x8mm to m3x10m (depends on your motor base thickness). the file is for self use -...

thingiverse

free

PyroX Arm - Motor Protector by WorkshopBeasts

...a ziptie. around 15mm of motor protection and small landing pad. screws go straight to carbonfiber, no tpu in...

thingiverse

free

Diatone Grasshopper 160 Landing Gear / Feet by whoisthis_95

...fibre frame, and use the existing screws for the motor mount. used for both the front and rear arms....

thingiverse

free

EMAX BabyHawk 2 HD Landing Pad by cmacclel

...new babyhawk 2. i hate bumpers that use the motor screws so this was designed to be applied with...

thingiverse

free

DJI Spark Landing Leg by Isaiahsdad

...of the spark. just clip it on at the motor and slide it towards the...

thingiverse

free

Landing Gear (10mm) by BankNYank

...with the screws going through them and into the motor this item is also for sale on my website...

thingiverse

free

Landing Gear (7mm) by BankNYank

...with the screws going through them and into the motor this item is also for sale on my website...

thingiverse

free

2-3" Brushless drone landing gear by Makeadrone

...like the eachine aurora and many others. matches a motor base where the holes are 9mm...

thingiverse

free

Marui CJ-7 Golden Eagle / Landcruiser rear motor cover by rwxr

... rwxr thingiverse rear motor cover for marui cj-7 golden eagle / land cruiser. print with support and pins down for best result.

thingiverse

free

Skywalker X6 Wing Motor Mount by Blackfede (altered mountpoints) by CrazyCrow

...were a bit fragile and could crack on rough landing or propstrike during landings or take off. all credits...

thingiverse

free

Hovership Alternative Landing Gear by philsson

...wanted a landing gear that was attached to the motor mounts instead so i came up with this ones....

thingiverse

free

Resptile S800 Remoable Motor Mount Plate by heinduplessis

...my ply wood plate broke off on my first landing so i made this that has slots for m3...

thingiverse

free

Micro Quad Drone 110mm by vicviper

...print 4 of them. motor mounts for 8.5mm coreless motor ...

thingiverse

free

Zohd orbit motor mount by Elliot_fpv

...orbit wing to replace the original one after broken landing several iterations were done and now the tolerances are...

thingiverse

free

Quadcopter motor mount and parts for 1/2 x 1/2 square dowel from Home Depot or Lowes. by flugtek

...the main frame is 1/2" square dowels and the landing gear are 3/8" square dowels on the motor mount...

thingiverse

free

Motor protection for Quadcopter diatone DIY 250 by milcent

...land correctly .... i draw this protection fixed using 2 of the 4 motor screws under the arm. may be longer screws may be needed.

thingiverse

free

Tarot TL250 Landing Gear 10 degrees by valade

...by valade thingiverse special landing gear for 10 degrees motor tilt, damped by the original foam. front and back...

thingiverse

free

Diatone Taycan MX-C Landing Skids by theronin

...two versions included with 0.5mm base thickness for the motor mounting screws as well as...

thingiverse

free

43mm Quadcopter Landing Gear by Xcopter

...to the arm or if you cable tie your motor on, the cable ties should go right through this....

thingiverse

free

Quadcopter motor shield (30mm round arm ends) by Painless360

...protect the motor from water, mud and grit on landing thanks for looking, happy...

thingiverse

free

QX90 Motor Endcap by HayoBrouwer

...camera as much as possible. they als work as landing gear and protect the motor...

thingiverse

free

Emax 250 Motor Mount Feet by jcborden

...motor mount feet by jcborden thingiverse these are replacement landing feet for the emax 250. they mount underneath the...

thingiverse

free

LANDING GEAR BACK TEST ASSEMBLY JIG FOR 307 by Theidd

...42.40 mm landing gear strut mount back arm assembly motor pin 62.10 mm landing gear strut mount back arm...

thingiverse

free

Talon V1 EDF Flange Mounts by phreakmonkey

...to clamp 70mm edf flanges to turnigy talon v1 motor mounts. also serves as "landing gear" to protect edf...

thingiverse

free

Arttech Mustang motor mount by touchthebitum

...motor mount by touchthebitum thingiverse after several crash at landing my support mount broke. i decided to build a...

thingiverse

free

Tarot TL250 Motor tilt 10-4 degrees for 2204 Motors by valade

...deg calibration stand (optional, can use special 10 deg landing gear) tested with 2204 tarot...

thingiverse

free

Small wing motor mount by jolars

...motor plate. more space to protect the motor in crashes/landing. you will need the base, two sides and a...