thingiverse

free

30mm Pan Magnet Holder for Drill Bit Adapter by dys0n

...n petg at 235, retraction at 7.5@45mm/s with 70c or higher heated bed. dremel to friction fit and print flat, no supports needed.

thingiverse

free

Double Molle 30mm flashlight holder with magnets by CosmicVelocity

...magnets). magnets are awesome! either use it as a magnetic holder for the lamp or attach a pocket knife...

thingiverse

free

Hexagonal Bases with Magnet Sinks, Single and Multi-Hex - 30mm scale for Lancer, Battletech, etc. by thathobo

...le, the size 2 and 3 simply have 2mm deep holes, the idea being to seat the magnet so it's flush with the bottom of the base.

thingiverse

free

Raspberry Pi 3 Slim Case (REMIX) for 30mm Rpi Fan and Magnetic Feet (Optional) by schmittycity

...et mounted anywhere on your cr-10 or metal control box. i plan on using the magnets to mount the pi easily on an enclosure later.

thingiverse

free

Magnetic mount for Foscam R2 and similar

...mounting link to use with a standard magnet (diameter 30mm ...

thingiverse

free

mini kossel JT magnetic effector plate by davejavu123

...effector plate by davejavu123 thingiverse this works with the 30mm fan (thing:948319) and the mini kossel magnetic ball joint...

thingiverse

free

Magnetic Mount for FW3A by Zuki416

...or any light with a 21.5mm od uses a 30mm x 3mm...

thingiverse

free

Magnetic Cupboard Door Catch by dazzadazzadazzadazza

...3mm magnets required plus fixing. size is 50mm x 30mm x...

thingiverse

free

Magnetic Whiteboard marker holder

...in the back to glue in a round magnet. (30mm diameter and 7mm thickness or smaller) i just used...

thingiverse

free

Dicebox with lid and Dicetray for Feldherr mini 30mm high by Rvd11t

...(l 70, w 170, h 30mm) dicetray (l 200, w 170, h 30mm) dicetray and dicebox fit side by side inside a feldherr mini transport case

thingiverse

free

Magnetic tools by ikeay

...stickers in the indentations. the size of indentations is 30mm x 30mm x 2mm. -- 磁石で壁にくっつく小物の収納道具です。 30mm x 30mm...

thingiverse

free

Magnetic Parts Tray 60x60mm by Adeninex

...the square size is 60mm x 60mm with a 30mm diameter circular recess for the...

thingiverse

free

Magnetic tool holder for pegboard by d300vs

...first layer over the cavity where the standard neodymium 30mm x 3mm cylindrical magnet goes, available wherever magnets are...

thingiverse

free

30mm fan duct for mini kossel by davejavu123

...that works with my mini kossel effector with custom magnetic ball...

thingiverse

free

magnetic gopro style mount by daster

...to know that i havent included. these fit three 30mm neodymium magnets with a tapered hole. obviouisly the screws...

thingiverse

free

30mm Desert base with small slot by Ghostknife

...to table on a cookie/baking sheet. these are sized for 30mm. have printed and tested with multiple minis for warmachine / hordes.

thingiverse

free

EZ Spin Motor experiment by Deman01

... my thoughts on the free positioning of the coils. must still be printed to be tested ... dia. 6mm x 2mm magnets 30mm x 8mm anker

thingiverse

free

Shape Primitive Magnets by rocketboy

...e em stay drop a small drop of zap-- or any cyanoacrylic glue along the edge of the magnet once you've press fit it in place.

thingiverse

free

Water level indicator for the rain barrel - Wasserstandanzeige für die Regentonne by Alegoty

.... die skala wird mit doppelseitigem 3m klebeband befestigt und der rote stab mit montiertem magnet in den styroporblock gesteckt.

thingiverse

free

KOSSEL EFFECTOR by WAIT24

...er of 12mm, it is necessary to prepare six magnets thickness 4mm. because protruding portion is small, modeling height increases.

thingiverse

free

Dungeon Floor Snap-Fit Base (30mm, 25mm, and 20mm) by dutchmogul

...verse designed these bases for my reaper models. snap-fits without any need for glue, and you can put weights or magnets inside.

thingiverse

free

Hexagonal Box with lid by Superrei

...ed. comes with another version that allow you to install magnets to lock the lid. so the content will never come out by accident.

thingiverse

free

Dial Indicator Magnetic Lathe Mount

...and cheap to get from ebay. one m6 x 30mm bolt. some strong glue to fix the magnets in...

thingiverse

free

Medium miniature vault XL by Rusty19861

...ses. this version allows for a 30mm overhang from the base. added holes for additional 6x2mm magnets to keep the lid more secure.

thingiverse

free

Q iBalance by Dr_One_aka_Layer_Man

...diameter) - 2 on each side depending on magnet magnetic field strength if not enough add more magnets. 4...

thingiverse

free

Magnetic stirrer tool for 4⌀ motor shaft by Xylitol

...by xylitol thingiverse the two round places will fit 30mm x5mm neodymium magnets.https://www.youtube.com/watch?v=jbhp6q80qkw i case of video block du...

thingiverse

free

Magnetic button/indicator by PPK

...magnets. the stl and openscad source is for a 30mm diameter button with a 12.75x3.2mm magnet, but it's customizer-enabled...

thingiverse

free

Zweibrüder LED Lenser P7R and P5R (and others) dual charge mount by PredatorJr

...predatorjr thingiverse mount for fits with both types of magnetic chargers with 23 and 30mm diameter the large 30mm...

thingiverse

free

Portal Box for storing 20x - Micro Secure Digital Cards by Atiesh

.... aperture logo is the intellectual property of valve co. p.s.2. i buy 8x2mm magnets... but they are 8x1,8mm ! china magnets ftw!

thingiverse

free

Table Saw Measure Guide (Magnetic) - Triton by famacdonald

...with the heights being; 5mm 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm the angles are 30, 45, 60...

thingiverse

free

LED-Panel-Magnethalter 30mm hoch by Hans_n

...ecke haben trafo und kabel genug platz. für ein 30x30cm panel habe ich 2 stück verwendet, die 4 magnete reichen dafür locker aus.

thingiverse

free

Hex base customizer by aaronu7

...magnet holes go all the way through to support magnetic bottoms as-well-as the ability to put magnetic dials on...

thingiverse

free

Pokéball Badge / Pin / Fridge Magnet by pikafoop

...shell red: pbb_shell if you want to print in one piece and paint it instead, i've included a pbb_one_piece_flat file as well.

thingiverse

free

Circular Container by Wonky

...by wonky thingiverse circular container on a swivel with magnetic latch. 8 cm dia. 3 different heights 15mm, 20mm...

thingiverse

free

Magnetic Screw Boxes by thomasrmbt

...the box (outer size : 50 * 50 * 30mm inner size : 40 * 40 * 27.5mm) the...

thingiverse

free

Anet Magnetic Extruder Fan Frame KIS by Axxaran

...but just because i wanted to use the original m3-30mm and m3-20mm machine screws. you dont need the fat...

thingiverse

free

Tesla Model 3 Jeda USB hub 30mm deep door

...mm diameter 3mm deep neodymium magnets. i was able to recycle the magnets from the original door by peeling back the rear veneer.

thingiverse

free

Door Holder by neo777

... glue as well. printed all parts in petg. video of it working @: https://www.youtube.com/watch?v=53dxsichru4&feature=youtu.be

thingiverse

free

Magnetic or Suction Cup Pen/Pencil Holder

...be used to mount the keyhole-type holder. made for 30mm suction cups with a 7mm nub/end; easily available at...

thingiverse

free

Whiteboard Holder by Julian_Schroth

...te-10-st%c3%bcck-dick/dp/b000gpi6z0/ref=sr_1_2?ie=utf8&qid=1488746653&sr=8-2&keywords=stifte+10er+pack+dick+d%c3%bcnn

thingiverse

free

Extruder Fan Removable Assembly by valadium

...easy access to internals of the extruder. this is magneticlly attached using 8x 2.5mm x 1mm neodymium magnets. this...

thingiverse

free

Trash Can Deodorizer Box by seajseven

..." neo. cube magnets to attach to metal lid of trash can) 3 different box depths are provided ( 18mm, 21mm and 30mm deep )

thingiverse

free

USB Magnetic Stirrer by J-Max

...neodymium magnets for the rotor + 1x stir bar (20>30mm or +-1") build instructions :...

thingiverse

free

Kossel Mini Effector for E3D V5 Hotend by AlexBorro

... hotend has a tight fit into the effector. if you prefer clamping, just print 2 clamps and fasten with 2x m3x16mm bolts and nuts.

thingiverse

free

DSLogic Pro and DS212 case by chris_law

...ttom. hardware needed - 2 off 6mm x 3mm round magnets, 2 off m3 x 6mm posi pan head screws, 2 off m4 x 30mm posi pan head screws

thingiverse

free

Lina Inverse Demon Amulet take 3 by senjak

...wo 6mm*m3 screws. please post pictures of any you make! oh, i've include a picture of the round cabochon's i'm using.

thingiverse

free

Spool holder with magnetic clamp by Tachion

...required parts: 2pcs 61806 bearings 2pcs dowel pins: d=3mm, l=30mm (https://www.szogker.hu/products/illesztoszeg-hengeres-d03*030-din-6325st-edzett-(m6)-import-3396427544.html) 8pcs cylindrical magnets: d=10mm, l=5mm 8pcs cylindrical magnets:...

thingiverse

free

Icosahedron Puzzle Slicers

...00mm slicer, 4mm magnet depth): used to created the "anatomical heart puzzle" https://www.thingiverse.com/thing:4146688

thingiverse

free

Quest 2 Magnetic SaberGun controller Stock for oculus by ethan_m

...] 2x m4 x 40mm + 2x nuts four 30mm x 5mm magnet (or anything smaller) duct tape happy...

thingiverse

free

Hello, I'm Baymax. by prinPLA

...) app(android)! option : slicer : cura speed : 30mm/sec top/bottom thickness : 1.6~mm wall thickness: 2mm infill : 0% raft : on

thingiverse

free

Magnetic Fridge Pen Holder by mza1979m

...been modified to make it better (changed height from 30mm to 50mm, cylinder diameter from 10mm to 12mm made...

thingiverse

free

Polygon Stack Box by romaswe

...of magnet recess: 10mmx2mm print time v2polygonstackboxbasic: i use a 0,8mm nozzle, 20% infill and no supports and it took 1h 46m

thingiverse

free

Dishwash indicator by uvens

...shers door and set to clean when you start the dishwashing . when the dish is removed from the machine, turn the knob to dirty.

thingiverse

free

Simple Racing Sim Magnetic Shifter by andrewwong2000

...easy to print. this design uses an m3 x 30mm standoff spacer (has a 5mm od) commonly used in...

thingiverse

free

3-phase brushless motor by DylanMissu

... stator 3x spool 6x m3 hex nut 3x 30mm m3 bolt 1x 25mm m3 threaded rod 2x 8mm dia 3mm bore bearings 4x 6mm dia 4mm length magnets

thingiverse

free

Magnetic tray for a 30x10mm NIB magnet by magonegro

...is a magnetic tray for a mini monster cylindrical 30mm diam x10mm height nib magnet, the design is thought...

thingiverse

free

Ekobots - Magnetic levitator shield for arduino nano. by jsirgado

...magnets 10mm x 10mm x 3mm + 8mm x 30mm threaded rod);http://www.youtube.com/watch?v=w-jtu5cxl9o video 2 (1x cube magnet 10mm +...

thingiverse

free

BIBO Bed Level Jig (works for Replicator as well) by SergeBu

...temperature first bom: m3 x 30mm screw m3 nuts (x2) 10mm diam neodymium magnets (x2) dial gauge with 8mm rod (+/- 20€ on amazon)

thingiverse

free

Magnetic probe holder for aquriums by Prozium

...sealed magnets from my eshopps frag rack that measure 30mm x 12mm best to print in abs or pet...

thingiverse

free

E3D 30mm Fan for autolevel effector by abriggs12

...can be used without modification. magnetic joint upgrade kit: http://www.chimesindustries.com/product-page/kossel-mini-magneticupgrade-w-o-hotend-and-fan ...

thingiverse

free

Min Projector 45 degres by fbd38

...l affect the clarity of the image. (note that an extra lens can be added, after the mirror to improve the overall focus.) enjoy !

thingiverse

free

Magnetic Walking Robot "Magno-Rama" 3d printed by RobotHut

...two 20mm electric magnets could be replaced with larger 30mm magnets if you wanted to make a larger robot...

thingiverse

free

Infill 3D Delta Bot Magnetic Effector by Infill3D

...add to the magnetic force considerably. it uses dual 30mm fans, there is 2 options in how to run...

thingiverse

free

Modular Magnetic Deck Holder, Horizontal/Vertical Card Stand and Token Tray

...for 1st layer), infill 10% and average speed of 30mms: 1h 30m. modular magnetic vertical stand: a stand for...

thingiverse

free

Quiet Lightweight Magnetic Print Head - Kossel - e3D V6 by TBehr

...40mm will fit however. if you use the full 230mmish) print bed i'd recommend not a 10mm thick fan....

thingiverse

free

CTC Enclosure by bula87

...and screws to mount it to 5mm wood frame. fill free to remix, edit and whatever. i attached design spark mechanical source files.

thingiverse

free

kossel magnetic ball stud carriage redux by ElJefeDSecurit

...configuration. bored the holes so that you can use 30mm m3 screws with delrin wheels. also added a tensioner...

thingiverse

free

Kossel K800 Magnetic Effector with inductive probe

...don't needed to glue them. nossel sensor distance is 30mm i bought the magnets here:...

thingiverse

free

Mega 2021 Puzzle Cache

...box and has been re-mixed to take a geocache magnetic micro. i've done two versions one with the lincolnshire...

thingiverse

free

Spice Rack for Camping (magnetic lock) by seravi

...a spice rack to hold 4 30ml glass bottles (30mm x 70mm) securely. superglue 6 15mm x 6mm x...

thingiverse

free

Percy the Small Engine ("Wooden" Railway) by jsc

...half before printing to make it easier to print. magnetic coupling provided by 3 x 1.5 mm neodymium magnets....

thingiverse

free

Match box with holes for magnets by Sonic_Ox

... temps in celsius. i printed this in pla. it cleans up easily and works well with just a little tweaking to make it slide well.

thingiverse

free

Magnetic stackable catan card and figures tray/box (REMIX) by Dragon_Ball_Z

...some height/depth to achieve same height, when stacked with "30mm storage box crest.stl", as tiles stored in these containers:...

thingiverse

free

Wyze Sense contact sensor garage door hinge mount

...as not smooth enough and the hinge was getting stuck, so unfortunately, this is the only version i was able to get to work well.

thingiverse

free

Jewelry display box by obogz

...bf8b77f96085c/e/c918823da7056e4448409197 no supports needed for pla. printed with wood pla at 210c, 40mm/s, 60c bed, no supports.

thingiverse

free

Automatic Driveway Gate Chain End Stop by adammmma

...into the automatic driveway gear box gears if the magnetic switches fail during opening or closing of the gate....

thingiverse

free

AOV belt buckle with removable Knuckles Knuckle belt by Malcolm_X

...and more options for you magnet(s) or velcro can be used if you do a cutout also works without enjoy and be exelent to each other

thingiverse

free

Dual J-Head Kossel Magnet Upgrade by 3Rotor

...no cable-ties required. the stl file can just be mirrored for the opposing sides funnel. file name:dual-object-fan-40mm_half.stl

thingiverse

free

Oculus Quest 2 - Prescription Eye Glasses lens insert (with Magnetic) by NGC-VR

...size. (height of lens) i made it for 29.5mm, 30mm and 35mm. i used the metal round magnet (4...

thingiverse

free

Hex Flight Stands for Space Fleets - A Billion Suns by dcmolina

...on the stands) for your larger ships and 1mm for mass 0 ships. you can use these for printing ships with the hole for the magnet.

thingiverse

free

Kossel Hexagon hotend by kert

...an would have hit the print bed. i don't have received yet my 30mm fans so i couldn't test it, but it should be fine now!

thingiverse

free

Lathe Cutter Centering Tool With Magnets by AlbyBat

...um magnets 8mm diameter 3mm thick. you can edit the fusion 360 file .f3d and insert your name and surname, or whatever you want.

thingiverse

free

Magnetic Paddle Shifter by jxdot567

...parts around my area. [bom] shifter arm: m3 x 30mm bolt or screw [x1] m3 x 20mm bolt [x2]...

thingiverse

free

Microsoft Surface Pro 1-2, Brackets by Krypson

...the surface pro with the kickstand extended and the magnetic keyboard attached. printed with abs at 30mm, 60% infill...

thingiverse

free

One piece, e3d v6 Kossel Effector for magnetic rod ends by MortarArt

...mount for an ir sensor. there's space for the 30mm fan, and dual blowers for print cooling. i'd honestly...

thingiverse

free

Sheep paper clips holder / Mouton porte trombones by boxplyer

...21mm epaisseur de couche 0.3 epaisseur de coque 1 taux de remplissage 25 température d'impression 220c° type de support aucun

thingiverse

free

Ekobots - Levitator with arduino. by jsirgado

...sensor must be at least 5mm of distance from electromagnetic you can use other linear hall sensor (do not...

thingiverse

free

Low-cost lab rotator

...motor shaft captive. i designed it with a modular, magneticlly-attached tube holder so that i could swap it out...

thingiverse

free

Modular Dungeon Walls by TheRooster

... longer have holes in them. you will need to add holes post-process. i've found that paper clips work great for hinge pins!

thingiverse

free

MPCNC LCD Enclosure by The_Shrike

...e in below link: https://cad.onshape.com/documents/5d1fd9060e0e2ed768f3cd42/w/d6e708bdd10a53a6a557e5c6/e/ab1fdd325375dcb6f545b9dd

thingiverse

free

Magnet_Taschenlampen_Halter by Hans_n

...ten und lässt sich gut positionieren. die gelenke und alle anderen teile gibt es hier: https://www.thingiverse.com/thing:3905060

thingiverse

free

Coin Collector Box by markus_p

....ly/2z0vz1h) to attach the top to the bottom. follow me on instagram for latest news ​https://www.instagram.com/ernie_meets_bert/

thingiverse

free

double Hotend Effector for Delta style printers by daveb500

...complete hot end effector for delta style printers using magnetic attachment. the 10mm balls are bonded into the effector...

thingiverse

free

Brick Wall

...ight of .02 with no supports straight to the build plate. printing with anycubic's green resin this took 9 hours for a print.

thingiverse

free

Backfire G2 Nose/Tail Guard by carniph3x

...80% infill. 0.2mm layer height. 205° nozzle, 60° bed (magnetic build plate, stuck well without adding glue). got best...

thingiverse

free

Adimlab E3D V6 Parts Cooler

...0mm e3d cooler, but adds an adapter to enable the use of a 40mm fan. it is also a remix so it will clear the adimlab x carriage.

thingiverse

free

Sim Racing Wheel Button Box with Magnetic Paddle Shifters by dan188

...shifter hinge arms into the back cover using a 30mm screw and nut. position the shifter switch plates into...

thingiverse

free

30mm-37mm scope protective caps (aimpoint 5000) by joelttyjoel

... are to use this, keep in mind that the layer direction is important. mine simply snapped off. i would recommend magnets instead.

thingiverse

free

Panorama Magnet Rotator Sigma 8mm lens second version by john3d

...it. nodal point is where the lens cap hits the notch. ready to shoot! i use it in combination of a canon 5ds others wil work too.

thingiverse

free

Printed Speaker Driver by lubbock238

...esigned for are one ferrite ring magnet at 80mm od 40mm id and 15mm thick, and one ferrite disk magnet at 30mm od and 10mm thick.

thingiverse

free

Nanoleaf Canvas wall mount by Barelyanything

... x 2mm magnets lying around, and i just tape them on the 4 slots in the middle of each sides and attached them to my metal shelf.

thingiverse

free

Bases set for A Billion Suns by T1ckL35

... part so that it is replaceable for different heights with magnet holes in the base and the lower part. more ideas are welcome :)

thingiverse

free

Titan E3Dv6 & Volcano fan mounts by AikenJG

...aikenjg thingiverse this is a remix of zeeflyboys excellent magnetic combo fan mount + cooling duct system for the...

thingiverse

free

5 Row Dice Box by DemonIIXII

...186 mm w: 150 mm h: 30 mm i am open to feedback on this item, it was my first experiment/attempt at making a box using tinkercad.

thingiverse

free

RAMPS 1.4 Enclosure by pandaproto

...and power to the ramps. the ramps enclosure is magneticlly joined to a similar enclosure for a 12864 lcd...

thingiverse

free

HTC Vive Controller Gun Rail Mount by rogueqd

... hammer and small piece of wood to tap them in. attach to your controllers using a 25mm m3 hex bolt and a nylock nut with washer.

thingiverse

free

J Head mount with cooling fan for Prusa I3 by DonMarle

...8x screws m3x 20 + nuts 4x screws 3,5 x 22 for an adjustable fan mount: 4x neodymium magnets 5x5x2 metal foil up to 0.3 mm thick

thingiverse

free

Dust Shoe for Rigid R2401 router by toalan

...it. i would suggest abs be use and not pla, i may do another shoe that incorporates magnets to secure the shoe to the router.

thingiverse

free

Bottle Mouse Trap by Kingmiwok

.... printed .2mm, 35-50% infill using pumpkin seeds as bait. i read that mice like carbs. let's see if i catch one tonight...

thingiverse

free

Magnetic Effector & Carriage & Double 50mm radial Filament Cooler for Delta Printer (E3D V6 mount) by hoaze

...filament cooling fans (tbd. will be added later) integrated 30mm fan for the heatsink quick exchange (e.g. with an...

thingiverse

free

E3D v6 and Titan extruder Cyclone layer fan Makergear M2 by Zeeflyboy

...m2 by zeeflyboy thingiverse 30mm extruder fan mount plus magnetic quick detach cyclonic layer fan. uses two 8x2mm neodynium...

thingiverse

free

MMU2s Filament Buffer and spool holder remix by wfvn

...ol holder when putting the filament in the ptfe. once that is done, you can clip that part on the base. but that's for later.

thingiverse

free

Delta Effector for E3DV6 & 2x 40mm fans by robkar

...thingiverse i have built a delta printer (http://www.thingiverse.com/thing:923830) with magnetic ball joints. these magnetic joints works really well in...

thingiverse

free

Makita Dust Shoe (RT0700-RT0701C) by scottyorr

...nless steel clamp. that worked great, so i've provided a new file for the upper part of the shoe to incorporate that change.

thingiverse

free

Stir Plate by DurrtySteve

...stranded wire • 4, 8mm neodymium magnets • 1inch magnetic stir bar • 10ohm resistor (optional--i needed one to...

thingiverse

free

30mm E3D Bigbox Calibration Cube by Woinson95

...ake up the bigbox logo and the e3d logo. if you print it with a small nozzle you will see all the gears and the gap between them.

thingiverse

free

Mechanical Keyboard - SiCK-68+Encoder+Oled Display (V2) by soapsrx

...caps) six cherry mx blue keys. 30mm diameter encoder knob 13mm diameter magnets guide: https://www.thingiverse.com/thing:4134988

thingiverse

free

Hall Effect Sensor & Magnet Mounts by Mortorojo

...solutions spindle mount solder / filament solutions hall effect sensorhttps://www.tindie.com/products/kardacian/magneticsensor-hall-effect/?pt=ac_prod_search blue ox solutions spindle mounthttps://www.ebay.com/itm/designed-to-order-router-spindle-mount-for-ox-cnc-seen-at-openbuilds/261607006495 kyo c-beam sphinx plates...

thingiverse

free

Magnetic door latch by henryhbk

...a pivoting holder that contains a pair of these [30mm epoxy coated magnets] (https://www.amazon.com/gp/product/b07fz2vmg8/ref=ppx_yo_dt_b_search_asin_title?ie=utf8&psc=1) (each one with 18lbs force!)....

thingiverse

free

Farmbot.io Universal Tool Assembly by pythonholum

...e, 12 wire cable, 3m length 3 barbs for 1/4" tube id 3 1.5mm wide, 9mm id square-profile o-rings 3 15 x 5 x 5mm ring magnets