thingiverse

free

Anet Smooth Rod Length Fix reinforced by buratatxo

...anet smooth rod length fix reinforced by buratatxo thingiverse anet smooth rod length fix reinforced

thingiverse

free

Dremel CNC carriage 16cm rods length

...he kone version (https://www.thingiverse.com/thing:3526829) i've increased the height of the carriage to fit 16cm length rods

thingiverse

free

Anet Smooth Rod Length Fix by tobbi007

...ameter than the rod for easy printing.. its doesnt need to be perfect fit because the smooth rod is aligned by the acrylic glass.

thingiverse

free

Rostock rod length calibrator by djdelorie

...00 mm. the measurements of the arms closest to and furthest from each tower, can be used to verify the rod length for that tower.

thingiverse

free

Delta Calibration for Rod Length by lstandage

...suring across the block from the side the tower number above the 50mm marking will indicate whether the rods need to be adjusted.

thingiverse

free

Delta 3D Printer Rod Length Determining Tool by trnmcd

...5mm-od-3mm-id-x-1-meter-for-kossel-delta-rostock remixes are welcome in order to get different sizes for the rod and screw holes.

thingiverse

free

Delta printer calibration object - rod lengths only (faster print time) by thedoble

...ut your slicer should ignore it as it's too thin. measure the blocks on each axis after printing - they should be 60mm apart.

thingiverse

free

Rod Bolt Length Measurement Tool (Stretch Gauge) by timniedermeier

... in place. the picture in the images section is an earlier prototype of the tool. the uploaded version is a little more polished.

thingiverse

free

Kossel rod calibration tool by melipharo

...to calibrate length of a carriage rods. print two of them and fix on a desk. now you cam accurately measure the rod's length.

thingiverse

free

Dipole antenna base by CanDok

...8 cable. antenna response frequency depends length of the metal rods. (length of the metal rods should be 1/4 of your wavelength)

thingiverse

free

2020 EXTRUSION Z SUPPORT ROD FOR M8 ROD by UKCD

...2020 extrusion z support rod for m8 rod by ukcd thingiverse print two & cut the right length of m8 rod. simples.

thingiverse

free

Birds swing

...f the rod: 172mm you can use a piece of wood instead of the rod. if you use the 3d printed rod, you might need to sand the edges.

thingiverse

free

1/87 Cab Forward Pickup by njd13

...rtrax m200 at 140 micron successfully. need two 30mm length 1mm brass rods for axles, and 65mm length 1mm brass rod for main rod.

thingiverse

free

1/87 All Terrain Personnel Carrier by njd13

...rtrax m200 at 140 micron successfully. need two 30mm length 1mm brass rods for axles, and 57mm length 1mm brass rod for main rod.

thingiverse

free

Another Half-Rod for Rostock by tauneutrino

...ck by tauneutrino thingiverse for all that have problems printing the full rod length in one piece i have cut the rod in halves.

thingiverse

free

Nighthawk 250 PZ0420M Camera Mount by verleihnix

...nighthawk 250 pz0420m camera mount by verleihnix thingiverse camera mounts in 30mm or 35mm rod length. original rods are 35mm.

thingiverse

free

MacBook Holder / Increase by CHeffe

...macbook holder / increase by cheffe thingiverse the rod is 10mm and approximately 22cm length.

thingiverse

free

Folger Tech Delta Rod Jig by csorrows

...jig. this can allow the rods to be different lengths i cut it down to 1 wide to be...

thingiverse

free

Parametric Two Screws Rod Bracket by ctheroux

... typically a 8 mm rod. the scad file is parametric. it can be adapted for almost any size of rods, any length, hight and width.

thingiverse

free

Ikea curtain rod tip 17.5mm by Deadpoetic6

...urtain rod tip 17.5mm by deadpoetic6 thingiverse tip for the ikea rod räcka. fit the medium length one, about 17.5 mm diameters.

thingiverse

free

Roll-holder / stable basic framework for roll diameters to max 120 mm

...depending on the length of the rod, all roll lengths can be held up to a maximum diameter of...

thingiverse

free

rotary hand tool (Demel type) attachment for cutting steel rod by alisonleanne

...to cut 4mm hss to 17mm length. skp file uploaded so u can adjust the to cut rods with different diameter and to different length.

thingiverse

free

Rod assembly jig for Rostock printed u-joint rod ends by hyperair

...n leave this jig permanently assembled on the tower of your bot so that you can always make replacement rods of the exact length.

thingiverse

free

1/87 6x6 Truck by njd13

...0 at 140 micron successfully. need three 30mm length 1mm brass rods for axles, and 20mm length 1mm brass rod for rear axle pivot.

thingiverse

free

Knee press lifter rod for sewing machine by Lezvix

...lifter rod for sewing machine by lezvix thingiverse knee press lifter rod for sewing machine jack f4 (or similar) length = 82 mm

thingiverse

free

Simple, yet stylish phone stand Printable Rods by ctheroux

...le rods by ctheroux thingiverse printable rods for http://www.thingiverse.com/thing:229655. length is 50 mm, 10 mm in diameter.

thingiverse

free

Printed delta rod and universal joint by spellicer

... by spellicer thingiverse these ended up being 204.5 mm diagonal rod length in repetier. fully printed assembled with m3 screws.

thingiverse

free

BernieNet2 - The Bird by Fredbartels

...the base rods, which are .261" epoxy tubing. rod lengths can be obtained from the sketchup...

thingiverse

free

Barrel Cleaning rod by Bastrym

...erse simple rod for cleaning gun barrel. 120 mm and 150 mm length. use walls instead of infill to make it stronger. no supports.

thingiverse

free

8mm rod mount for SS-5GL by livingplasma

...style microswitches. uses m2.5 bolts in 8mm and 20mm lengths ...

thingiverse

free

Spool Holder by omicron22

...rse spool holder designed to use 7/8in dowel rods. legs are 30 degrees from center. legs and center rod can be made any length.

thingiverse

free

M6 Coupler by ranyardm

...m6 coupler by ranyardm thingiverse for getting the extra length out of m6 threaded rods, carriage bolts etc.

thingiverse

free

XY 800 laser engraver table by james_III

...is really easy to change to suit other rod lengths just check pdf file. basically sliding rod length determines...

thingiverse

free

Camper Curtain Rod Finials & Union by mrsamnc

...are actually fiberglass electric fence poles from tractor supply. we cut them to length and glued the finials to the end of them.

thingiverse

free

Archery Bow Holder by DruckDirDeineWelt

...archery bow holder by druckdirdeinewelt thingiverse you need a round rod d= 14mm, i used a length of 130mm.

thingiverse

free

Mini ploter by Vidas

... thingiverse x, y axis 6 mm steel bars the z-axis of 3 mm steel rod table size depends on the length of your rod. i did 160x100

thingiverse

free

Anycubic Kossel Frame Corner Reinforcement by dromlada

...r and 1 upper braces / rod. hole for steel pipe or threaded rod (length that fit your printer) are 10mm. glued whith super epoxy.

thingiverse

free

2020 Rod Filament Guides by rattfink

...by rattfink thingiverse created this to allow for various lengths and to change the angle of the guide hole...

thingiverse

free

Remixed davinci spool holder by Jmapscience

...spool holder by jmapscience thingiverse just increased the length of the rod so that it may be used with larger filament spools.

thingiverse

free

KISSpool by macaba

...holder that uses m5 threaded rod cut into 140mm lengths (adjust to suit...

thingiverse

free

cr-10 frame stiffener brackets by nkjh97

... of the rod length. added rod end that will fit 6.5mm rod or 1/4" rod. fiberglass driveway marker or all thread should work.

thingiverse

free

Curtain Rod Bracket by eddiekoch92

...e (first design). dimensions: radius of holder:14mm screw hole size: 4.5mm diameter length of arm: 100mm height: 90mm width:40mm

thingiverse

free

Nerf Flywheel Remover Base

... rods to push flywheels out of cages. uses 1/8" rods roughly 2" in length. fits worker clear cases and ofp style cages.

thingiverse

free

Diagonal Rod Connectors Delta by TommasoEngineering

...een the metal rod and the traxxas joint. included in this design is the mount for ensuring all diagonal rods are the same length.

thingiverse

free

Phineas 3DP magnet rods making tools by ustkl

...s length, 10mm steel ball, m8x10 strong magnet 10x8 nylon tube cut tool 8x10 fiber glass cut tool final fixing and alignment tool

thingiverse

free

Straw - Holder/Dryer by REDGEO

...straw - holder/dryer by redgeo thingiverse 16 x aluminium rod : 5mm diameter, 60mm length hammered into the holes after print.

thingiverse

free

Simple 10mm Rod Hanger + Hook

... hang some things on it (especially tapes, like i did) you can get only the hook there: https://www.thingiverse.com/thing:3882175

thingiverse

free

Bed Stabilizer for Solidoodle 2 by AZERATE

... simply print, cut two 8mm rods to length, and insert one lm8uu into each arm. secure the rods with collar shafts or hose clamps.

thingiverse

free

K40 Adjustable Bed - 8mm Acme Rods by rpjamess1

...else is the same as the original remix. requires 4x 688z bearings, 4x 8mm acme nuts, and 4x your length of 8mm acme threaded rod.

thingiverse

free

Tapered Threaded Rod (bolt) module for openSCAD by wambold

...le, as are the rod length and hexagon head dimensions. if you have comments, please send them to ascendiac@gmail.com . thanks! -w

thingiverse

free

back scratcher by VirgilLaVerge

...virgillaverge thingiverse end of scratch-back (rod of 5mm diameter to add) dimensions: width: 47,20mm length: 50mm height: 15.76

thingiverse

free

Spool hub/adapter by darealmoo

...y darealmoo thingiverse this is a treated filament-spool-hub to center the spool on 8 or 10mm rods. thread-length is 50 or 80mm.

thingiverse

free

Mendel prusa diagonal strengthening by how_eee

...ndel prusa diagonal strengthening by how_eee thingiverse uses 6mm threaded rod 370-400mm length. i printed it in abs 35% infill.

thingiverse

free

Support ABS Prusa it3 by MA_BLACK

...a it3 by ma_black thingiverse support for the plastic reel it3 prusa, simple, and allows you to vary the length of the rods m8.

thingiverse

free

Anycubic kossel Rod repair part by vector0717

... to increase strength of connection. notice that this design is for temporary use. it can't guarantee the length of the rod.

thingiverse

free

Mendel Spool Center by sketchyJ

...these readily available tubes. three of the threaded rod lengths should be modified to 190mm or 7.5", the other...

thingiverse

free

8mm rod clip on holder by s_s_

...ays it is for a 8mm rod (be it smooth or threaded, should work both). it is made to mount on 20x20mm alu profiles with m5 screws.

thingiverse

free

Rod, dowel, and bar storage by JordanTruesdell

...ifting disc, i added an appropriate length of aluminum welding filler rod and hand bent a loop at the top for easy finger access.

thingiverse

free

Folger Tech Kossel 2020 Rod Arm cutting Jigs by GeoDave

...the openscad files so you can change the cut lengths to what you need. i printed these at 20%infill...

thingiverse

free

Kyosho OT-35 Servo saver rod by rwxr

...kyosho ot-35 servo saver rod by rwxr thingiverse replacement part for kyosho ot-35. made as one piece. total length is 38mm

thingiverse

free

Adjustable foot for frame stabilizer by FabrizioC

... the feet of this thing:http://www.thingiverse.com/thing:843050 it is useful to be able to adjust the length of the threaded rods

thingiverse

free

120mm Fan Mount for RepRapPro Mendel by mrbluesky

...ro mendel by mrbluesky thingiverse i have adjusted the length of the arms to fit on the reprappro mendel (28,5 cm rod distance).

thingiverse

free

Bobbin For Spinning Wheel With 110mm Length, 6.75mm rod like Ashford Kiwi 2 by tsetliff

... tiny wiggle, but in our case it wasn't enough to cause issues as the whirl on this spinning wheel has a more obvious wiggle.

thingiverse

free

Da Vinci Bridge

...int bar 1 or 2 - rod can use 4mm dia x 60 or 80mm length. you can also form a circular fence if you have sufficient bar and rod.

thingiverse

free

Triangulated Bridge by GIE-FABLAB

...nner diameter: 3,6mm).the connecting rods can have any length. here they are 5 cm so the kids can make their things on the table.

thingiverse

free

Screwdriver_holder by Ondrej_Vana

.... to hold everything together i used threaded rod and bigger nuts. all measures are in the photo. rods length is 315 millimeters.

thingiverse

free

Surface Mount Rod Bracket by ctheroux

...d tickness can be easily modified in the scad file. i use this bracket to mount a power supply under the bed of a prusa mendel.

thingiverse

free

Parametric Rod Brace Customizable by ggroloff

... z-axis rod. i no longer have any play in the rods with these installed. make sure you have a good first layer for the tolerance.

thingiverse

free

Atomx upgrades for direct drive extruder, top filament spool, endstops ... by jonix

...added 8mm thread rods. y axis use 8 mm thread rods length 320 mm on endstops clamp on the smooth rods top filament spool holder.

thingiverse

free

Improved M4 Z Couple by TBRIshtar

...vitamins: plastic tube 8mm od, 5mm id, 2x 15mm lengths 8x m3x10 bolts (i only had m3x15) 8x m3...

thingiverse

free

Pointer by DaveMakesStuff

... pointing at things. sections screw apart for compact storage and transport. rods are 10cm long, print whatever length you need.

thingiverse

free

Scalar M Spool Holder for Bowden System by s3rkan

...wden system by s3rkan thingiverse you need an appropriate length of 8mm steel rod and two 608zz bearings to assemble the holder.

thingiverse

free

Spool Holder by UZB

...spool holder by uzb thingiverse might need adjusting to your own spool 2 bearings 608 1 8 mm rod 100 mm length

thingiverse

free

Headphone Stand by kingfisher

...with 9mm dowel to connect the printed parts rod lengths 1 x 200mm & 2 x...

thingiverse

free

Folding adapter for telescopic landing net by mariuschirita

... link below:https://www.ebay.co.uk/itm/carbon-fiber-hand-pole-telescopic-fishing-rod-tackle-1-8m-5-4m-lightweight-ss/253054595373

thingiverse

free

8mm Threaded Rod Quick C Clip by LittleDangerous

...to replace the tedium of adding/removing nuts on long lengths of threaded...

thingiverse

free

TronXY Upgrades by drmcland

...ade for 5mm x 12 bilt and t-nut the y rod mount is design for 8mm rod. the rod needs to be 16 inches in length to work enjoy drm

thingiverse

free

1/100 APC V2 by njd13

...26mm length of 1mm brass rod for the axles, and 9.5mm length for the turrent. printed on zortrax m200 at 140 micron successfully.

thingiverse

free

Caravan Camper ladder renewal by mitpro

... are 30mm and is absolutly enough. the outer diameter affected the angel of the ladder. 50mm looks good, as seen on the pictures.

thingiverse

free

Fishing rod by AbocAbac

...ll parts. designed with draftsight. cut out of 6mm thick material (i used mdf). this assembly can be glued for a stronger result.

thingiverse

free

Magnetic Rod Precision Builder by Nutaaq

... printer ensuring all of them are same length. it requires: 1x wood plank to screw the pieces. 2x m4 magnets countersunk 12mm m4.

thingiverse

free

Modular Spool Rack/Mount/Storage by Vickrw

... as rod length) able to fit any roll easy to print and assemble rods are .75" diameter all files (.stl and .sldprt) included

thingiverse

free

Helmet Wall mount

...t a 28mm dowel rod and allow for a l shape away from the wall. adjust length of dowel rod to fit your hit and distance from wall.

thingiverse

free

Worx Landroid Garage by AllKing

...m5 a2 rods 16 pc. m5 nut 14 pc. ø5 washer rods need to be cut to length once assembly i done. printet on creality ender 5 plus

thingiverse

free

Anycubic Kossel Linear Plus Magnet Upgrade by Atziano

...1x 2k or super glue some links:magnets 10x5mmsteelballs 10mmcarbon rods update 19.08.2018: -added a version for 12 x 3 mm magnets

thingiverse

free

3/4 PVC pipe mounts by Vandelayandco

... pipe mounts by vandelayandco thingiverse end pieces to turn any length of 3/4 pvc into a handle, towel bar, curtain rod...etc.

thingiverse

free

Prop-organizer by mcrubens

...ingiverse small design to organise your (macro)props on a wall. needed extra: 3.5mm carbon rod cut to length double sided tape

thingiverse

free

Dual Z Axis Belt Tightner by a55830

...ner by a55830 thingiverse added a belt between the 2 z-rods for better alignment but i could not find a belt in the right length

thingiverse

free

Moody Net by Fredbartels

...are attached. the rods are 3/16" dowels and their lengths can be obtained from the sketchup...

thingiverse

free

Ingress XMP Burster by kudoh

... weapon item in ingress. to assemble , require an acrylic rod ( length about 40mm, diameter 2mm). and a dual extruder 3d printer.

thingiverse

free

Curtain rod - Vitragestange - Fenstervorhang - Vorhangstange

...d the rod's horizontally, but maybe it is more efficient to combine the rods with a single plane and print them vertically...

thingiverse

free

OmniStand Extra Long Filament Spool Rods by BaronWilliams

...e rod during a print job. i have not had this problem with 0.5 kg spools, or when using the 100 mm spool rod with heavy filament.

thingiverse

free

Ball Joint (Rod End) for m5 screws by lasicmk2

...m ball / housing spacing is 0.6mm no support needed those settings worked best on zortrax m200 with z-ultrat filament (abs based)

thingiverse

free

Fishing rod with reel by AbocAbac

...arts. designed with draftsight. cut out of 6mm thick material (i used mdf). this assembly need to be glued for a stronger result.

thingiverse

free

extra 12 mm guide rod for leapfrog creatr by bandit-ed

...el rod has a length of 415 mm the cable guide needs some optimizing(work in progress) this is for the dual printer head version!!

thingiverse

free

Covid Mask Dryer by ruben02

... 2 supports and need 5 aluminum rods with 6mm diameter. the rods lenght is your decision. i've made my rods with 50cm length.

thingiverse

free

GoPro Attachment system by VidarM

...best fit. see also: gopro table clamphttps://www.thingiverse.com/thing:4702438 the rod lengths from center hole to center hole: rod no: length:...

thingiverse

free

M8 threaded rod fan mount bracket for Prusa I3 by RobertCL

...an can be attached with an m3 bolt and nut. if the nut wont quite go into the slot heat it using a soldering iron to ease it in.

thingiverse

free

Soap Holder by Aeonfly

...eter of 20mm -25mm. to assemble you need an m3 square nut and an m3 cylinder screw in the appropriate length for your shower rod.

thingiverse

free

FS7 M2 Viewfinder Squared Rod 180mm by jcloninger

... 45° angle to fit on my 150x150 print bed. printed with 60% tetrahedryl infill, it is pretty solid and holds the viewfinder well.

thingiverse

free

OpenRC F1 2017 Rear Axle Reinforced by Drazen

...larger to accept a #8 threaded rod. the hole runs the full length of the axle. use a drill to help thread the rod into the axle.

thingiverse

free

MARES Icon HD battery key by AndrewStick

...my mares icon hd diving computer. print a key, press two metal rod into holes. rod length: 17 mm, diameter: 2,2 mm (i used nails)

thingiverse

free

RigidBot Filament Spool Holder by FrankLumien

...eeded. can use rods with diameters up to 9mm and a length of 411-435mm - the original spool rack rod is 8 x 422mm and works fine.

thingiverse

free

K'nex icosahedral vertex connector by AllPurposeNerd

... thingiverse a k'nex connector for building icosahedral frames. you need twelve of these and thirty rods of the same length.

thingiverse

free

Clamp GoPro by UMH

...iverse clamp gopro, if you put your gopro in a aluminum rod, you only need an aluminum bar length you need and diameter of 10mm.

thingiverse

free

Beskad - Mando Sword (metal Spine Version) by Bozzy1979

...rse this is 2nd version that allows for a 4mm x 550mm metal rod to be placed the length of the sword to add rigidity and weight.

thingiverse

free

directional YAGI WLAN Antenna EXTENSION for 2.4 GHz - 2 pcs and letterless by cmh

...nsion on your accesspoint-antenna and you have a directional wifi signal :) the gain should be around 10 (+/- 2) dbi. have fun :)

thingiverse

free

Minimalistic V-Slot jig for delta rods by theinternal

...jigs, where you basically have to manage six different lengths parallelism, etc.) disadvantages: it potentially takes longer, since you...

thingiverse

free

Hanger Rod mount for Wire Rack Shelving by mccand

...ed on the shelving sold at target, but if you adjustments to fit a different brand of wire rack shelving, please leave a comment.

thingiverse

free

Delta / Kossel Magnetic Rod Jig by peaberry

...case of any stray glue, and has a few flats included in the design to make it easier to measure the distance between centres etc.

thingiverse

free

Mini Paddle by Modisch_Fabrications

...gth of ~20cm. sand the contact faces of the aluminium rod for better adhesion, as the oxide will prevent most glues from bonding.

thingiverse

free

Vesemir Steel Sword Witcher 3 by Coozco

...ith 1/8 steel rod running the length of the blade. the hilt will need to be wire wrapped as it was not implemented into the model

thingiverse

free

Wall Mounted Filament Holder by Orshov

...by orshov thingiverse use 10 mm rods with preferred lengths use a bearing with an inner diameter of 8...

thingiverse

free

mini drill

...el rod as a slider and 6mm screw for the handle when you finish printing, cut the rod length as you desire. infill 40% is enough.

thingiverse

free

Indra Homemade - Alternate Plunger Stem by captainslug

...rod for customers having issues with higher spring loads. this assembly will require much more adjustment than the original file.

thingiverse

free

Large Kossel M8 Threaded Rod Braces for 1515 OpenBeam (like Kossel XL kit from builda3dprinter.eu) by alexspeller

...wide and 750mm high. if your beams are different lengths download the scad file and adjust the parameters. you...

thingiverse

free

Door Holder by neo777

... glue as well. printed all parts in petg. video of it working @: https://www.youtube.com/watch?v=53dxsichru4&feature=youtu.be

thingiverse

free

Pen holder by yohabi

... get single bolt mount-bracket. use your favorite slicer with your stl's. stl for 7mm pen and 8mm threaded rod are included.

thingiverse

free

OSSCR - Smart Home Curtain Rod by meffken

...ment, uart support) • adding a switch to manually open the curtain • adding more tube diameters • enhance energy efficiency

thingiverse

free

keyboard foot C Tech Ixyon by Rodycze

...ot c tech ixyon by rodycze thingiverse spare foot for my c tech ixyon keyboard. as tenon i used m3 threaded rod, length: 6,5 mm.