thingiverse

free

Irrigation set 1

...irrigation set 1 thingiverse irrigation set 1

thingiverse

free

Drip Irrigation 1/4" tube cup clip by dimdizo

...ot; tube cup clip by dimdizo thingiverse clip to hold 1/4" tubing for drip irrigation. works on cups with a horizontal lip.

thingiverse

free

1 to 3 barb 1/4" drip for irrigation by freNRG

...frenrg thingiverse as the title says, this is a customized version of the single straight through design by _____ paperdesignman

thingiverse

free

1/4" Irrigation Tubing Grouper by bjzq888

...l break off the little nozzle pieces, which are a bit brittle in pla. it could also be used to tidy multiple lines, if you want.

thingiverse

free

1/4" Drip Irrigation Tube Bug Cap by quadrar

...y to print. one day i will test the flow to see how much flow restriction it has. i use it for 1gal/hr and it seems to work fine.

thingiverse

free

Stake for 1/2" irrigation drip tubing by sgpdude

...tubing by sgpdude thingiverse simple stake to hold down 1/2" drip tubing. ~30 minute print with petg at 0.3mm layer height.

thingiverse

free

1/4" Drip irrigation tubing stake by featherboa50

...drip irrigation tubing stake by featherboa50 thingiverse based of dellrio's tubing stake. added spikes to help keep in place

thingiverse

free

Short Version Garden hose connector x4 adapter for 1/4" irrigation tubing by bjzq888

...my 1-into-4 garden hose connector. this makes it a bit stronger, and it's still plenty long for 1/4" irrigation tubing.

thingiverse

free

Filter for a Garden irrigation System (1/2" Connector) by SolarGermany

...erse.com/thing:2898964https://www.thingiverse.com/thing:2899033https://www.thingiverse.com/thing:2884789 have funn and like... sg

thingiverse

free

1/4" .25 Drip line irrigation tubing stake by dellrio

... hose in place. stakes are 4" long and more sturdy (and cheaper) than the stakes you get from the home improvement stores.

thingiverse

free

1/4 inch drip irrigation tube screw-in wall mount by AlienBard

...ables. however if you need a large volume of them it might be cheaper to purchase a bulk pack then to print them. happy printing!

thingiverse

free

siku irrigation Perrot by Lou640

...lou640 thingiverse it is an perrot irrigation trailer in 130 ...

thingiverse

free

2-Liter / Soda Bottle Cap to 1/4" Drip Irrigation Adapter by TheMakersWorkbench

...at are inside of a grow chamber at a slow rate to prevent spillage. modify it here: https://www.tinkercad.com/things/bajgxfj09p7

thingiverse

free

Garden hose connector x4 adapter for 1/4" irrigation tubing by bjzq888

...e "short" version of this same item, https://www.thingiverse.com/thing:1498649, to see if it gives you the same issues.

thingiverse

free

Short Version Garden hose connector x2 adapter for 1/4" irrigation tubing

...or one with 2 instead of 4. here you go! let me know if you have any issues with it. it should print just fine without supports.

thingiverse

free

5/8-in Coupling for Polypropylene Drip Irrigation by otdiggity

...coupling for polypropylene drip irrigation tubing. works with rainbird 12in and 5/8in drip irrigation tubing, and similar type products....

thingiverse

free

End Closure for Irrigation

...end closure for irrigation thingiverse end closure for 12" irrigation tubing. 1/2" irrigation tubing has an o.d. of...

thingiverse

free

Irrigation Hose Clip by imagifab

...is for attaching 1/4" drip irrigation hose to a 12" diameter rod, as is common in "shepherd's hooks" for...

thingiverse

free

13-16mm hose end for irrigation system by Gigante

...hingiverse this fits a 16mm hose irrigation system. bought from gjordnära in sweden, but will fit normal 1/2" hose as well.

thingiverse

free

Irrigation controller adapter ring by inigoml

...is difficult to find and if found, plenty expensive (1€ in amazon, more than the irrigator itself). this is...

thingiverse

free

Tap drip irrigation by DmeTrue

...or rubber hose. the range of operation is approximately 1100% of the opening. 0% of the opening can not...

thingiverse

free

Bulbasaur Drip Irrigation Holder by Caleb6543

...by caleb6543 thingiverse i wanted something to hold a 14" drip irrigation tube in the garden. i took the...

thingiverse

free

Drip Irrigation (oops) Plug by CuriouslyCory

...plug, this drip irrigation plug is to terminate the 14 inch drip lines, or potentially plug a hole in...

thingiverse

free

Irrigation Stinger Installer Tool by DaveGadgeteer

...stinger installer tool by davegadgeteer thingiverse tool for installing 14" couplers into thick-walled 3/4" flexible plastic pipe. holds the...

thingiverse

free

Adjustable sprinkler nozzle for drip irrigation tubing by shocksofmighty

...this is a simple sprinkler head that fits into 14" drip irrigation tubing. it is distance adjustable using a...

thingiverse

free

Hose splitter 1/2" (garden hose) to 4mm hose by Dbach_MetalWorks

...designed to speed and ease the install of automatic irrigation ...

thingiverse

free

1/4" NPT Male to 1/2" NPT Female by nebarnix

...nebarnix thingiverse designed to adapt a valve to an irrigation stem. use plenty of teflon tape or it may...

thingiverse

free

1/2 Inch (16mm) Irrigation End - Designed for use with Rain Bird 1/2 inch Hose by TheOrangeBaron

... hose about 3-1.5 inches from the end of the hose and stick the other end into the other loop. thanks for checking out my design!

thingiverse

free

1/2-in Polypropylene End Cap Tie by otdiggity

...with 1/2-in and 5/8-in polypropylene tubes (mainly for drip irrigation hoses). use these on the end of polypropylene to...

thingiverse

free

Gardena Garden Microdrip Irrigation System Adapter by Consti3D

...thingiverse adapts from an 1 inch thread to two 3/1 inch (4,6mm) microdrip pipe...

thingiverse

free

Irrigation garden from Perrier 1L Bottle by fab76

...t de 8 heures à 12 heures dépendant du style de terre. un support est inclut dans le design au niveau du goulot et du pas de vis.

thingiverse

free

Plug for 1/2" poly hose by jetpad

...thingiverse fits in the end of a 1/2" poly irrigation hose to plug it up. update - i added...

thingiverse

free

1/2'' poly pipe stakes by jshansen

...poly pipe stakes by jshansen thingiverse for holding 1/2'' irrigation poly pipe string in place. clips right onto pipe...

thingiverse

free

13 to 4mm irrigation pipe adapter by Aussie_Jo

...to see how well pla will stand up to sun and water). i did anneal the print for about an hour at 100c (212f) to make it stronger.

thingiverse

free

Irrigation Sprinkler (4lt/hour) by gpechli

...can be positioned at the end of a 4.6mm (3/1") tube. the ball-valve limits the flow and creates the...

thingiverse

free

Irrigation Sprinkler (2lt/hour) by gpechli

...can be positioned at the end of a 4.6mm (3/1") tube. the ball-valve limits the flow and creates the...

thingiverse

free

Drip Irrigation Plug by cabennet

...from the mainline tube which is generally 1/2'' to 1#39;' ...

thingiverse

free

Sapling or Hose collar by imagifab

...is a simple collar i designed to protect drip irrigation hoses (and saplings) from the evil string trimmer. since...

thingiverse

free

irrigation 1/4 (8mm) tube end plug by Esq112358

... light should not be used. i also had a bit of fun printing the parts using different colors petg, separate colors for each zone.

thingiverse

free

Plant irrigation diffuser by mmotaba

...fairly cheap, got mine from amazon at $8 for 10 feet, use a safety or stick pin to place...

thingiverse

free

4mm Micro Irrigation Tap Adaptor

...about the thread pitch: notice that although threads for 1quot; and 3/4" are different as in uts (https://en.wikipedia.org/wiki/unified_thread_standard), in...

thingiverse

free

Irrigation Watering system for garden hose by Joens

...garden hose by joens thingiverse made to fit a 12" garden hose. drill a hole, mount the adapter, put...

thingiverse

free

Dual Input Drip Ring by Sandow50

...o allow redundancy. secure with tent stakes or something similar. print without supports. pla will not hold up well in the sun.

thingiverse

free

Bewässerung Verteiler 13mm auf 15x 4mm / Garden irrigation Hub 1-2 inch to 15x 4mm Hose by SolarGermany

... erreichen. edit: here are the blindplugs / hier nun auch die passenden blindstopfen https://www.thingiverse.com/thing:2903438 sg

thingiverse

free

SIP Sub Irigated Planter by Scottman129

...ervoir at the bottom. a false bottom with a central soil wick is printed separately and set into the part on an integrated shelf.

thingiverse

free

Drip Stake by eussrh

...is a 6" stake for holding 1/4" irrigation (drip irrigation tubing. they cost about $.20 in bulk when you...

thingiverse

free

4x4 rockwool irrigation plate by Sandow50

...rock wool cubes. holes on edges are sized for 14 rainbird lines but will need to be chased with...

thingiverse

free

Water-Irrigation Soap holder by Wheatley_Core

...through the grooves in the holes and sides (part 1, and into the cup below (part 2), when you...

thingiverse

free

Solenoid holder for custom irrigation system by jasmino

...solenoid on the bracket, are 4 x #4 x 12" metal screws. have fun and enjoy...

thingiverse

free

Tap drip irrigation for 4mm tube by ronnyVegas

...v2_pet_cap_outer_adapter.stl (i can't seem to "remix" 2 items into 1 on thingiverse?) note: it does not completely close, that's...

thingiverse

free

Irrigation Spreader 2/Fan by bjzq888

...pla at 230 degrees, with no heated bed and 10% fill. it works quite well under low pressure (ie...

thingiverse

free

Drip irrigation goof plug by papergeek

...very quick to print. these should fit the standard 12" or 5/8" drip irrigation tubing with holes punched in...

thingiverse

free

Irrigation Stakes by BrianEnigma

...fighting for parking at the local nursery—to buy a $1 bundle of plastic stakes, of which i only needed...

thingiverse

free

Angle-style fan irrigation spreader by bjzq888

...the previous layers get time to cool. it fits 14" irrigation tubing quite snugly; i would recommend inserting them...

thingiverse

free

Irrigation Spreader by bjzq888

...this tiny item fits snugly into the end of 14" irrigation tubing, and splits the stream in two. my...

thingiverse

free

figure 8 hose clamp by cichonj

...clamp made to close the end of a drip irrigation 1/2 inch line with a simple clamp. see this...

thingiverse

free

Plant irrigation tubing stake by mmotaba

...thingiverse 4" long, irrigation tubing stake (fits any standard 18" outer diameter tubing). tubing snaps in place and holds...

thingiverse

free

Spray Nozzle 360 Cone by Aussie_Jo

...nozzle 360 cone by aussie_jo thingiverse this is a irrigation sprayer with a 360 degree cone pattern from 6...

thingiverse

free

Pool Siphon Inlet Filter by Chunkmunk01

...by chunkmunk01 thingiverse inlet filter for 1/2 inch poly irrigation tubing. used to screen out leaves and sticks for...

thingiverse

free

Garden hose female to 1/4 NPT Air adaptor by synocate2

...adaptor by synocate2 thingiverse i needed to drain my irrigation system and i have access to a spout that's...

thingiverse

free

Drip irrigation by peter120

...re 10-32 for attaching to the raindrip sprayer parts. designed in fusion 360 and printed on a cr10s pro with a duet2 electronics

thingiverse

free

Irritrol Rain Dial Outdoor Ext Replacement Key by usefulshrimp

...key to be used on rd600-ext-r, rd900-ext-r, & rd1200-ext-r irrigation sprinkler controllers box. why spend $6 on this one?...

thingiverse

free

1.5" o-ring to 1/2" pipe T fitting by TrotFox

...pressure to properly prime my 50' loop of 1/2" irrigation tubing (currently just hung on the fence, no fancy...

thingiverse

free

3/8" (Thread) to 1/2" PVC Adapter

...pickle, needing to run some submersible pumps for cloning irrigation systems; i had everything but the fittings to make...

thingiverse

free

Adjustable Standpipe Funnel for Bell Siphon by eussrh

...siphoning behavior. there are two versions for 3/4" and 1" standpipes. the funnel ball just snaps into the pivot base.

thingiverse

free

5LB spool holder by greenlee

...hold them. oh, the cross member is 1/2" pvc irrigation pipe. yep i have a lot of that laying...

thingiverse

free

Lord Kelvin Water Dropper - ThunderStorm

...& bolts m8 rod 2 x 3/4 " drip irrigation valve 1 x 80 mm chimney pipe 1 x...

thingiverse

free

Float Level switch by Volkvanmyn25

...glue to prevent moisture entering. it needs a 1/2'' irrigation nylon nut that is glued onto the end for...

thingiverse

free

Fluid distributor by gpechli

...controlled and distributed lubrication (e.g. large bearings) or controller irrigation or any other purpose that requires multiple controller fluid...

thingiverse

free

Conduit Clip 16.5mm by i3DSystems

...16.5mm od (varies widely, 16 to 17mm), is actually irrigation swing pipe 1/2" id - available at home depot...

thingiverse

free

orchid hanging adapter (put std. orchid plastic pot into std. ceramic pot) by schlaubi666

...but support nessesary( same material + printtime as v2) *https://de.aliexpress.com/item/garden-tools-1-pcs-automatic-plant-waterer-watering-potted-flowers-drip-irrigationdevice-creative/32698285981.html?isorigtitle=true questions , comments are welcome, tips as well...

thingiverse

free

Widemouth Deep Water Culture Grow Jar by LucidOndine

...cut sections of 1/4" standard tubing (standard for dwc, irrigation and drip systems) an air stone an air pump...

thingiverse

free

Ekobots - Archimedes screw by Lauro_Antico

...transferring water from a low-lying body of water into irrigation ditches. water is pumped by turning a screw-shaped surface...

thingiverse

free

Garden Irrigation Spray - Beregnung - Remix by DaHa89

...und "360 - 2 connections") -hierfür die sprüher auf 1.25mm höhe anheben und dann mittig über dem benötigten fuß...

thingiverse

free

Earth Bucket Container Garden

...car relay with harness 24vhttps://amzn.to/2w24nfw rain bird manifre6s drip irrigation 6-port manifoldhttps://amzn.to/3anfkdv rain bird t22-250s drip irrigation 1/4" blank...

thingiverse

free

Suction Filter Basket by runner995

...had with jammed pipes using rain water in my irrigation system. it is a suction filter to protect pipes...

thingiverse

free

Liquid-Tite adapter by rssalerno

...case in point: i needed to mate 3/4" poly irrigation tubing to 1/2" liquid-tite electrical conduit. i had connectors...

thingiverse

free

10 Port Garden Hose Irrigation Hub by LucidOndine

...tering your plants too quickly. attach to a surface via 4 screws, or alternatively 2 zipties if you're the non-commital type.

thingiverse

free

Adapter 13 to 13,7 mm Pipe Irrignation System (fits Gardena Micro-Drip System) by gulliben

...without the adapter, i would have to lay multiple irrigation circuits with multiple pressure reducers, which would be expensive,...

thingiverse

free

K7ZOO 70 cm Parasitic Lindenblad Antenna by K7ZOO

...defined by a lindenblad configuration. the aa2tx design used irrigation parts, requiring careful alignment by hand and tedious bonding...

thingiverse

free

Schedule 40 low pressure 1/2-inch PVC pipe mini-tee and endcap by azaxev

...are for low pressure hydroponic manifolds for direct spray irrigation this allows using much lower power pumps than atomizing...

thingiverse

free

Ares permanent settlement by zivziv

...drown from the martin poles and used for drinking, irrigation of the plants,powering fuel cells for electricity, the rockets...

thingiverse

free

Garden Irrigation Spray System / Garten Bewässerung System by schiffer-soft

...option with a screw in all spray heads.added: sprayhead_v2_90dg.stl sprayhead_v2_10dg.stl sprayhead_v2_270dg.stl sprayhead_v2_360dg.stl happy printing mfg chris follow me on......

thingiverse

free

Geodesic LED Sphere by pcarless

...which holds 92 leds. it uses 1/4 inch drip irrigation tubing. the tubing i used came from home depot....

thingiverse

free

Shower Head to Garden Hose Adaptor NPT 1/2 female to 3/4 male by netnetter444

...spray outside during winter. my outdoor plumbing runs off irrigation water thats off for 4 months of the year....

thingiverse

free

Water Bottle Drip Irrigation System by amarand

...in the pictures. it should be a fairly standard 15l (50.7 fl oz - 1.59 qt) bottle, and you...