thingiverse

free

4 inch duct fan cap by zdmbkjkyo2y

...4 inch duct fan cap by zdmbkjkyo2y thingiverse caps for a 4 inch inline duct fan.

thingiverse

free

2 inch fan adapter

... whatever 2-inch fan and hose you need. i have not yet printed it yet so i don't know if the screw holes will line up or not.

thingiverse

free

4 inch exhaust fan silencer by ivanlivov

...4 inch exhaust fan silencer by ivanlivov thingiverse designed this to reduce the noise out of my 4 inch exhaust fan.

thingiverse

free

4 Inch Fan Shroud by Affordable3D

...4 inch fan shroud by affordable3d thingiverse an enclosure shroud that fits a 4 inch dryer hose nicely.

thingiverse

free

92mm fan 4 inch duct adapter by Entreps

...92mm fan 4 inch duct adapter by entreps thingiverse attaches to a 92mm fan to4 inch ducting

thingiverse

free

140mm fan to 2.5 inch hose adapter by grink

...an to 2.5 inch hose adapter by grink thingiverse this is used to vent a 3d printer enclosure with a 140mm fan and 2.5 inch hose.

thingiverse

free

nerf flan blower for 5.5 inch fan by ClownCorder1

...nerf flan blower for 5.5 inch fan by clowncorder1 thingiverse its a fan blowercover

thingiverse

free

4.75 Inch Fan Mount by saslates

...t just sits on it and the fan is then bolted to the mount. this can be used for any size fan really. have fun, and keep creating!

thingiverse

free

4 inch duct fan cover by zdmbkjkyo2y

...h duct fan cover. wrap 1 piece of electrical tape around the inserted portion to make it fit snug and provide friction for grip.

thingiverse

free

60mm fan to 1.5 inch flex hose by nickmkk

...by nickmkk thingiverse this is an adapter that will route the output from a 60mm fan into an affordable 1.5'' flex hose.

thingiverse

free

cooling fan for 2.5 inch HDDs by mostly_harmless

...ps://www.thingiverse.com/thing:4846347 2.5 inch hard drive holder https://www.thingiverse.com/thing:4846354 made with tinkercad

thingiverse

free

20 Inch Box Fan Dual Air Filter by __CARINA__

...and a high quality pleated filter on the exhaust to remove smaller particles and odors. https://www.thingiverse.com/thing:968923

thingiverse

free

4.25 Inch Fan Cover by kb3lnn

...tremity easy to learn and use cad http://www.rs-online.com/designspark/electronics/eng/page/mechanical have a great day. :-)

thingiverse

free

Box fan adapter to 4-inch pipes and ducts by inhale3d

... by inhale3d thingiverse variations on a 4" box fan adapter to round, 4"-ish exhaust or vent pipe, spouts, and flanges

thingiverse

free

Fan support 4 inch ducting by Seenov

...e 2.5" fan mounting holes are too far, edit them before printing. i added a low-cost pmw controller to adjust the fan speed.

thingiverse

free

Antminer Fan Shroud 3 Inch Exhaust by openhackspace

...nd some bitcoin: 1kb42bdmdihgqhg9qyw3qzfdcvxywjqwig if you guys need some made shoot me an email at maker@openhackspace.com will

thingiverse

free

120mm Fan Bracket for 3x5.25 inch bays by milstrata

... buy a print of this? please check out my etsy shop!https://www.etsy.com/listing/828166590/3x525-inch-bays-to-120mm-fan-mount-for

thingiverse

free

vivosun fan reducer 4 to 3 inch for snapmaker 2.0 enclosure by franxav1317

... snapmaker 2.0 enclosure by franxav1317 thingiverse adpater reducer vivosun carbon air filter 4 inch for snapmaker 2.0 enclosure

thingiverse

free

PC Fan 120 mm to 4 inch Ducting by aRych

... pc to blow air into two 4 inch pipes so i made this. v2 has a smaller 4 inch output to accommodate overlap but v1 is best route.

thingiverse

free

38.1mm. Fan Cover or 1.5 Inch. by kb3lnn

...tremity easy to learn and use cad http://www.rs-online.com/designspark/electronics/eng/page/mechanical have a great day. :-)

thingiverse

free

120mm fan to 2*2.5 inch hdd by skiphix

...hingiverse add more storage to itx pc cases. not the most sturdy design, but it is cheap to print you will need screws and nuts.

thingiverse

free

Air Filter for 6 inch Duct fans - Canadian Well by jor3l

...a reduction that holds the fan (6 to 2 inches fits fine a pvc pipe) and then created a...

thingiverse

free

6 inch rack - 2 x SSD with 25mm fan by T0m1sl4v

...kind of hot so i remixed this to have an additional 2.5mm fan and some grills for the airflow all credit goes to phaddeus enjoy !

thingiverse

free

makerfarm prusa i3 6 inches fan cover by thiagokunz

...e (http://www.thingiverse.com/thing:147501). this prevents the wind pulled by the fan to hit the object being printed in the bed.

thingiverse

free

Antminer Fan Shroud 5 Inch Exhaust by openhackspace

...nter) my print times are roughly 45 minutes a part. if you guys need some made shoot me an email at maker@openhackspace.com will

thingiverse

free

6 inch rack - 2U - 3 x 25mm fan blank covers by ellisgl

...e 6 inch rack (#6ir): https://www.thingiverse.com/thing:2463154https://www.thingiverse.com/thing:2465309 sketchup files included.

thingiverse

free

End cap for 1 inch fan stand extension (filament stopper) by snowboarder

...on one prints a little bit quicker but version 2 will stay on more securely as the cap is longer. printed at .2 mm layer height

thingiverse

free

Vent Fan - 120 mm to 4 inch by onebitpixel

... a custom airbrush paint booth. left the wider secondary exterior ring to allow for good overlap seal using hvac reflective tape.

thingiverse

free

Fan duct adapter for ceiling collar (4 inch) by DruciferRedbeard

...wo zip ties. after printing, i lined the adapter up on the ceiling collar and drilled two holes for the zip ties to pass through.

thingiverse

free

Raspberry Pi4 7 Inch Touchscreen display case 40mm Fan V-Slot by _ypO

...from :https://www.thingiverse.com/thing:1585924https://www.thingiverse.com/thing:4545405https://www.thingiverse.com/thing:4081975

thingiverse

free

Retro mount plate for 120mm computer fan in 3x 5 inch bay (for a retro computer case) by Dmytry

...oks like an old speaker. if i were to print it again i would add clearance for the fan blades (fan almost grinds on the grating).

thingiverse

free

20 Inch Box Fan HEPA Fan Brackets. by ShippingMammals

...bust it. update: petg works way better for these. pla is just to brittle to handle much mechanical stress for something so thin.

thingiverse

free

Raspberry Pi 7 inch touch screen case w/ fan by spool2kool

...ksj%2f6ibh&ddkey=https%3aen-us%2felement14_us%2fw%2fsearch use fine threaded computer case screws and m3 pan heads with nuts.

thingiverse

free

Official raspberry pi 7 inch touch screen for O11 dynamic mount without fans by briguyd

...mount for the pc case, but i don't run a top fan on my pc, so i remixed it to move the mounting holes to the top of the print

thingiverse

free

20 Inch Box Fan Air Filter by AtomicFlx

...s are easier to install as they are more flexible. if i had a garage i would use this while woodworking to keep the air clean.

thingiverse

free

120mm 5.25 inch drive bay fan mount

... any other case as well, given you have the space. the freecad file is attached, so you can change the parameters to your liking.

thingiverse

free

3D Printer Fume Fan / Duct Coupler 120mm fan to 4-inch duct by addennis

...8&psc=1 use a zip tie or hose clamp to attach the duct; it's a pretty tight fit but will fall off if tugged. works great!

thingiverse

free

Raspberry Pi 4 Case with 80mm Fan and 2.5 inch HDD Bay NAS/Game server

... it will also work fine without a ssd/hdd. update 20 november 2019: added a fan shroud (inspired by themonkeystink's make).

thingiverse

free

Antminer Fan Shroud 4 Inch Exhaust by openhackspace

...n version, it literally takes 10 minutes. for those of you printing for you, your buddies farm or local area -- keep rocking out.

thingiverse

free

Fan connectors by sayol

... a connector between a four inch computer fan and 2.5 inch flexible tubing. the first version is in yellow, the second in green.

thingiverse

free

80x80mm Fan Cover by 3deometry

...80x80mm fan cover by 3deometry thingiverse 3d printed fan cover 80x80 mm or 3.1 x 3.1 inch fan

thingiverse

free

"Traposquitoes Part" Used 12 volt Computer fan inline motor mount for 4 inch PVC pipe. This was designed and tested by @traposquitoes a group of 8th grade students in PS 28 for the world's first compost and solar powered mosquito trap system. by naatus

...ng fan to create inline fan in 4 inch pvc for a solar/compost powered mosquito trap. check out a working model on @traposquitoes!

thingiverse

free

Support HD Fan by powercam

...support hd fan by powercam thingiverse diameter 50 fan support for 3,5 inch hard drive

thingiverse

free

Cooling fan housing by AndrewStaroscik

...cooling fan housing by andrewstaroscik thingiverse case to set a 120mm cooling fan in a three inch hole.

thingiverse

free

9InchRackTray by andrewmuck

...10 inch stuff, need something for the other 9 inches 40mm fan pattern from 40mm fan cover by rico...

thingiverse

free

14 Blade Fan by Tronz151

...14 blade fan by tronz151 thingiverse a fan blade to be used with what ever. has a 0.2 inch hole in the bottom for mounting.

thingiverse

free

Ductless fan mount for Solidoodle 4 by STU-DIO

...n can be purchased here: https://www.ifixit.com/store/mac/macbook-pro-13-inch-unibody-and-macbook-13-inch-unibody-fan/if163-022-1

thingiverse

free

10 inch rack duct by DarkFoxDK

...r below a 120mm fan module from the 10 inch rack project, to direct the fan exhaust out the front, or pull air in from the front.

thingiverse

free

40mm and 50mm fan guards by Mrcleanr6

...and 50mm fan guards. one file is modeled in inches and the other is in...

thingiverse

free

E3D Dual 40mm Fan Mount (Clampable) by Cjoutwest

...arm" in order to use this design you will also need 14 - 1 inch 6/32 inch screws 2 - 2 inch 6/32 inch screws 16 - 6/32 nuts

thingiverse

free

Rotor Ducted Fan Scaled by billrockus

...rotor ducted fan scaled by billrockus thingiverse rotor duct for 10 inch propeller

thingiverse

free

120mm Fan to 3in Duct Reducer by IglooChef

... mounts to a standard 120mm fan and the other end fits inside 3 inch aluminum flexible ducting. mount holes to fan are size m4.

thingiverse

free

120mm Fan Shroud - Horizontal Mount

...t thingiverse i wanted a 4th fan for my pc but only had an inch of space left so i made this to add an extra intake/exhaust fan.

thingiverse

free

2.5 inch hard drive holder by mostly_harmless

...://www.thingiverse.com/thing:4846347 four 2.5 inch hard drive fan https://www.thingiverse.com/thing:4846371 made with tinkercad

thingiverse

free

40MM Raised Fan Cover by iamdarkyoshi

...not sure which .stl works, i saved them in inches and in mm, so please tell me how it...

thingiverse

free

40mm Layer fan / Fan duct for Prusa i3. by romanlsola

...at are mounted on hotend screws. these screws are 1/8 inch and the distance between the centers of the holes is 14.64 mm (image).

thingiverse

free

Printrbot Play stand/fan mount by makeboy27

...the printrboard. i'm using a fan that is 1.5 inches square. link to my...

thingiverse

free

Low profile Fan Grill by Billy_Welsh

...had to print at 2540% to make it 8.75x9 inches ...

thingiverse

free

Front Vented Fan Insert for Modular Raspberry Pi 4 Case by sneaks

... the fan for anyone using heatsinks. this design allows for about 1/2 inch of space between the board and the bottom of the fan.

thingiverse

free

old hard drive fan by mostly_harmless

...://www.thingiverse.com/thing:4846354 four 2.5 inch hard drive fan https://www.thingiverse.com/thing:4846371 made with tinkercad

thingiverse

free

External hard disk cooling fan support by guangzhoup_china

...he top of the hard disk, not to the pcb side like many ones in the market, so there is no dust on the pcb after long time running

thingiverse

free

Raspberry Pi NAS Skeleton Case by Peter_Smith

... case for raspberry pi that can hold up to 2x3.5-inch hdds and one 2.5-inch ssd/hdd. designed for 120mm cooling fan in the front.

thingiverse

free

4 Post Rack Side 80mm Fan Adaptor by ellisgl

...ingiverse 80 mm side fan adapter for the 4 post 6 inch rack (https://www.thingiverse.com/thing:2465309). sketcup file included.

thingiverse

free

E3D V6 Offset 40mm Fan Duct by lethala

...ter. this is the fan adapter portion of that effort. the fan attaches to it with 1/2 inch #4 wood screws available at home depot.

thingiverse

free

4 Inch Duct Adapter by zurbran

...t and 120x120mm fan. slim, slim short, and regular version. note: the slim short version has a diameter of 98mm instead of 100mm.

thingiverse

free

Universal Fan mount and fan duct (E3d v6) by nice_3d

...t the holder. the fan ducts are in different sizes, use your favorite. i always wish you always one inch too much fillerment. :-)

thingiverse

free

Prusa fan relocation mount. by Halfwitt2

...e3d v6 and it dropped the nozzle a couple inches this made my cooling fan useless. made this mount...

thingiverse

free

220 quadcopter frame V2.1 with stack equipment optional fan 5 inch props 2 stack sizes

...ncludes vtx antenna mount not sure how anything will fit because my parts have not arrived yet constructive input is very welcome

thingiverse

free

dryer vent fan mount by dadrados

...of a printer enclosure. for a 4-inch dryer duct and airtight with a small (~6cm) fan i salvaged out of a broker brother printer.

thingiverse

free

AC Infinity 6 Inch to 4 Inch Reducer by JimAlex

...end is designed to with 4 inch flexible ducting. i printed it using a jg aurora a5s with 0.25 extruder, 0.1mm layer and 4mm brim.

thingiverse

free

3D printed body for 5.5 inch AMOLED touch screen for Raspbian

... for raspbian. https://youtu.be/cu7w8eu6xey 5.5 inch waveshare amoled touch screen 1080 x 1920 raspberry pi 3b+ 5v fan with case

thingiverse

free

Ceiling fan remote wall mount Kensgrove by thumppper

...inch ceiling fan from home depot. came with giant remote control but no wall bracket. remixed a close match for this perfect fit.

thingiverse

free

80mm Fan to 1" steel pipe adapter by jeffcorporation

...his fit 80mm fan to 1 inch steel pipe, npt threads. it uses dan kirshner threads library: http://dkprojects.net/openscad-threads/

thingiverse

free

Extended RAMPS 1.4 Fan Mount by salfter

...s 1.4 fan mount by salfter thingiverse i needed another half-inch of clearance for cables and such, so i tacked on some spacers.

thingiverse

free

Anycubic Photon Back Fan Vent Mount by msegurah

...xtract fumes from the machine. 2mm thick base, pipe connector external diameter is 57.5mm (2.5 inch) it has a 2.5 inch connector.

thingiverse

free

Universal fan, fan duct and Sensor mount (E3d v6) Part2 by nice_3d

...re in different sizes with and without 18mm sensor, use your favorite. i always wish you always one inch too much fillerment. :-)

thingiverse

free

Snap on hot end fan for e3D V6, uses a 40mm fan. by LocoMartin

...and all will be good. this was drawn in inches and when it exports to .stl the file get...

thingiverse

free

Geprc CX2 and CX3 (Cinepro 4k, CineKing, CineQueen) 2 inch and 3 inch Prop Guard

... easilly.. this is a reinforced version... cx2 guard: it fits a 9x9 motor mount... cx3 guard: hybrid 9x9 and 12x12 motor mount...

thingiverse

free

Satsana Ender 3 Two Fans Remix by HansisThings

...om which isn't needed because it has a fan for each side. also the cable slots. pictured are ~7 inch bridges with sunlu petg

thingiverse

free

Antminer Fan Shroud by Gratco

...se this is for connecting a 5-inch plastic hose to your bitmain antminer s5 or s7 for soundproofing or hot air venting purposes.

thingiverse

free

Mandala Vent Cover by TikiLuke

...vent or fan cover. the holes are sized 12 inches apart horizontally to scale to your needs...

thingiverse

free

Collect three vacuum lines - from 40 mm, 2 inches, 2 and 1/2 inches to 4 inches by Costa_D

...- (0.6mm. 255c. 115c. 60% in fill, 15 % fan cura draft- 0.2mm lh) feel free to support my...

thingiverse

free

120mm Fan Cover to 4 1" pipes by gnum10

...120mm fan cover to 4 1" pipes by gnum10 thingiverse 120mm fam cover to direct air flow to 4 1 inch pipes (boot dryer).

thingiverse

free

Print cooler fan intake restrictor by DGA

...this print cooler fan intake restrictor. i draw in inches so make sure to scale it by 25.4 use...

thingiverse

free

30mm Printrbot Fan Mount by Crispy001

...stock extruder mount screws will work. volume: .25 cubic inches abs weight: .01...

thingiverse

free

Nutone Bathroom exhaust fan adapter by hyoslvr

...your fan if you have the oval attachment like mine. original part got thrown away and the part was out of stock from the factory.

thingiverse

free

Fan Guard - 60 mm by henryarnold

...e enclosed area.https://www.thingiverse.com/make:406713 the fan guard should be printed facing down as presented in the stl file.

thingiverse

free

Ice King Crown Adventure Time Fan Art by 3DCentralVA

...some super rad powers! worth it, right!? measures 5.5 inches at the tallest point, just over 1 inch for...

thingiverse

free

6" Rack RPi3 W/Chassis Fan & Mounts

... this is a customisation of this six inch unit: https://www.thingiverse.com/thing:2954775 https://github.com/pgrondek/sixinchrack

thingiverse

free

Nema 23 Stepper Motor Fan Shroud / Mount by RockChalk846

...es require four screws. i used 1/2 inch long #4 screws (about 2.5mm diameter, 10mm long). the fans are standard 40mm case fans.

thingiverse

free

Laptop Stand Components by goldenPLA

...n reprap, prusa, or tronxy at 4.6x yields a loose fit. apply glue as necessary. see progress video: https://youtu.be/twvplqggmzm

thingiverse

free

Air vent grille, gravity flaps, for 100mm duct (4 inch) by cool-RR

... this cover is intended for vents that are 100 mm (4 inch) in diameter. if your vent is 6 inch, maybe you can try to scale it up.

thingiverse

free

140mm fan mount for printer enclosures by 3DPrintingJunky

...side notes/edits [1]edit: reduced duct outer diameter to 5 inches (v6 model) reduces print time but 5 inch hole...

thingiverse

free

4 Inch Duct Clamp by tripleq

... post it for others who may have to hang a dryer vent or any other 4 inch duct. i printed this with pla and an anycubic i3 mega.

thingiverse

free

6 inch wall pass through by billnis

... fan. i use this fan instead of the internal one for better, quieter exhaust and better cooling. the cover stays on with magnets.

thingiverse

free

Light Saber Hilt

...inches tall with a maximum width of about 1.75 inches there is a cylindrical cut down the center of...

thingiverse

free

120mm fan shroud by skuibreaker

...nch strong wind ball bearing 24v dc cooling blower fan the original shroud was a complete failure so i will try 2 3/4" hoses

thingiverse

free

80mm Fan Mount & Cover

.... you don't have to be super exact when cutting out the hole for the fan, since this covers both sides, cleaning up the look!

thingiverse

free

Lightsaber

...the right place! this saber hilt measures about 10 inches tall with a 1-inch diameter hole down the center...

thingiverse

free

LEDMO Power Supply Bracket

...number 6 flat head screw internal dimernsions: width: 1.89 inches depth: 1.31...

thingiverse

free

3.5 Inch Bay Grille by robo-mo

... by robo-mo thingiverse a grille i made to replace one i lost for my atx case. it allows for airflow across my hard drive fan.

thingiverse

free

40mm & 50mm fan guards for makergear m2 by Emadine

...original is here http://www.thingiverse.com/thing:145404 i just convert it from inches to...

thingiverse

free

Minimalist stand for a Raspberry Pi with 5-inch 800x480 touchscreen display by Santobert

...ithout an active fan. you do not need any additional accessories. just print it, remove the support and clip in the raspberry pi.

thingiverse

free

Soldering Fume Extractor for 1/4 inch coolant line by trg3dp

..., insert that into the body of the hood, then push in a 60mm fan. there is clearance to run the fan wires into the coolant lines.

thingiverse

free

80mm Case Fan Adapter by jcloer1

...went with the 4 inch. the square section simply slides over the entire outside of the case fan. there are no fasteners required!

thingiverse

free

Dual 5-1/4” 80mm Fan Mount by ajacocks

...ews and retained hex nuts. i also changed the mount for the fan to be an easier front-insertion setup, using m4 flat-head screws.

thingiverse

free

Solder Station Fume Extractor Clamp 100mm 4Inch by Rbeauchaine

...is is a adjustable clamp i made for a 100mm or 4 inch bathroom fan/duct. it allows the fumes to be extracted away when soldering.

thingiverse

free

Sunhokey Prusa i3 Servo and optical mount and 40mm fan mount by tnert2003

...welding rod files in 123d design to edit in inches ...

thingiverse

free

the Whatever Fan by mostly_harmless

...://www.thingiverse.com/thing:4846354 four 2.5 inch hard drive fan https://www.thingiverse.com/thing:4846371 made with tinkercad

thingiverse

free

AC Infinity Cooling Fan Filter Cover by rapratt101

...purpose of filtering the air. this was designed in inches (5.2in x 5.2 in). if importing as millemeters, scale...

thingiverse

free

Legend of Zelda Triforce Earrings by 3DCentralVA

...1 inch in length, and hang down about 2 inches when worn. available for purchase via:...

thingiverse

free

desktop stand for Pi 3 Case for 5 Inch Touch screen by lowboydrvr

...gree angle to sit on my desk can be scaled narrower a bit ( i scaled the left narrower to fit a back mounted fan) need to print 2

thingiverse

free

Another case for the 7 inch RPi screen by mebj

...e cost of having to print with supports. as the design is made for a pi4 it is possible to attach a fan and a switch for the fan.

thingiverse

free

Dood Shield Pi-Fan by DoNotPanik

...stic sheet around 6 mil -1 pm2.5 filter -1 1-inch strap -1 20 gauge wire soldering equipment non-stretch cotton/ polyester fabric

thingiverse

free

Solder Fume Extractor - Corner 6/32 inch Nuts by Bordwalk2000

...laying around for computer case fans that were 6/32 inches picked up some nuts from home depot and recreated...

thingiverse

free

Ergonomic Saber

...extravagant cosplayer. it is 12 by 2 by 2 inches ...

thingiverse

free

Raspberry Pi 3 B+ Ultimate Cooling Case by Pablofette

...ingiverse space for 60mm fan,4 x 1 and 1/2 inch screws for case. pegs may need to be scaled slightly depending on filament used.

thingiverse

free

MKS Base V1.4 Controller Stand off pad for TEVO by FloridaFishHunter

...ns operation. this pad is to be used in conjuction with the plexi-glass panels and hardware that came with the tevo tarantula kit

thingiverse

free

6" Rack, Raspberry Pi 3 Model B W/Chassis Fan by KronBjorn

...hed part, in order to use a 25x25x10mm fan. do a search for the tag 'sixinch' to see more units in the series <\b>

thingiverse

free

6" Rack, Orange PI Zero, W/Chassis Fan by KronBjorn

...'s, or transparent filament used as optical fibres. do a search for the tag 'sixinch' to see more units in the series