thingiverse

free

Fox 32 seal driver by Ktronik

...driver by ktronik thingiverse install your seals with this seal driver, fits fox 32 forks...also see my fox 32 topcap remover...

thingiverse

free

4 mm 5/32 in bit driver holder by The_Geek_Doc

...4 mm 5/32 in bit driver holder by the_geek_doc thingiverse i designed this to hold small 4mm 5/32 in hex driver bits.

thingiverse

free

Improved seal driver tool for Fox 32 suspension forks by creyc

...this improved version a tube protrudes into the fork leg, centering the tool and ensuring the new seals press in square and true.

thingiverse

free

Driver Station for 1/32 and 1/24 Slot Cars

...enough for pretty much any car, but please let me know if you come across a car that needs the slot to be longer in order to fit.

thingiverse

free

Fox 32 Fork Seal Driver Tool

... this yet, so feedback appreciated. also if anyone has dimensions for the 34 and 36mm seals i'll draw up tools for those too.

thingiverse

free

Lower Leg Seal Driver for Fox 32 Suspension Fork by creyc

...ool to fit both the old style fox seals as well as the latest low friction no-flange seals which have a slightly different shape.

thingiverse

free

A4988 Stepper Motor Driver Spacer.

...stepper motor driver module on a pcb that is 32 mils thick. the spacer allows the pins to just...

thingiverse

free

Laser Driver Slide Rack by psutex

...hole pattern that needs opened up and with longer 6-32 screws you can screw the driver onto the slider....

thingiverse

free

Fox 32 fork topcap remover (26mm) by Ktronik

...than a metal socket....also see my fox 32 seal driver.. ...

thingiverse

free

Model 3 - Nalgene 32 oz bottle adapter by sloflo

...that it doesn't get in the way of the driver arm. perfect fit for 32oz wide mouth nalgene...

thingiverse

free

MTB Fork Seal Driver Set by chriskmurray

...a full set of fork seal drivers. there are 32 34, 35, 36, 38 and 40 mm sized drivers...

thingiverse

free

lerdge stepper driver cooler by makermitch69

...a stepper driver cooler for the lerdge 3d s 32 bit mainboard (3d printer controller) it useds a 30x30x10mm...

thingiverse

free

Repetier 1.0.2 for RAMPS 1.4 TronXY X5S by rmriggin

...drivers an so on for 64, 128, 256 step driver. use at own risk. parts i'm using for my...

thingiverse

free

Fluke 645945: 8505A back leg by pigrew

...phillips. i damaged mine by using a normal phillips driver ...

thingiverse

free

Anet A6-A8 TFT35-V2.0 touch screen case

...a skr 1.3 controller and drivers. the controller and driver are 32 bit and all are packaged with amazon...

thingiverse

free

OnStep Shiled for ESPDUINO-32 [WeMos (D1 or D2) R32] by RomanHujer

...shiled tested with tmc2130 (spi version) and lv8729 stepper driver my others onstep things freecad souce is here note...

thingiverse

free

Nail driver guide by 3Dominion

...same length out, all by hand. the part is 32 mm tall, easily customizable also from the slicer. it...

thingiverse

free

R-CNC Z-Nut ACME lead screw by Aze33

...or 1600 steps per unit for a 16 microsteps driver ...

thingiverse

free

GASLANDS Mad Max Elvis

...revision 2 was not uploaded revision 3 - added: driver seat, dashboard, oil pan, gearbox, new frame, new grill,...

thingiverse

free

Remix body for Hexapod by mwilmar

...motion controller and 32 servo controller for sg90 servo driver https://www.youtube.com/watch?v=mghvjjpn82whttps://www.youtube.com/watch?v=hlo2kavnzde for more detail check here:https://www.instructables.com/id/simple-nodemcu-18-dof-hexapod/ u can also...

thingiverse

free

SnakeBite extruder for 3mm 3D printing filament by the_digital_dentist

...this is an experimental, high mechanical force 3mm filament driver to push the filament into the hot-end of a...

thingiverse

free

Toolbox for miniature tools by UroBen

...are the order numbers. screw driver kit: 52985a22 hex driver 0.05": 5497a22 hex driver, 1/16": 5497a23 hex driver, 5/64":...

thingiverse

free

PlayStation (PS3) Eye Mount for thin bezel monitor by mgthieu

...everywhere. with this mount and the cl eye platform driver (paid, 32-bit only) and/or ps3eyedirectshow (free, 32/64-bit), you can...

thingiverse

free

Barn Door Tracker firmware and electronic box by ndupont

...a button to resume. bom a drv8825 a4988 stepper driver board ramps arduino raspberry pi esp8266 3d printer driver...

thingiverse

free

Italian Armour Crew by NW_Cdn

...figures started out as the legendary m_bergman's 1-100 jeep driver i cut the jeep away, squished the figure down...

thingiverse

free

Arduino DUE mount by MaikaiGuy

...example projects and support from their software framework (peripheral driver, etc...). yeah... i'm...

thingiverse

free

Magnetic Tool Holder for Hex Drivers by LucidOne

...0.035" 26313 0.050" 26316 1/16" 26320 5/64" 26323 3/32" 2632 7/64" 26331 1/8" requires four (2 packages) 3/16" rare...

thingiverse

free

Large Arduino Mega incl. RAMPS 1.4 Case by lackaffchen

...first, the parts have missalignment and, second, my stepper driver on the ramps board overheat on bigger prints ending...

thingiverse

free

R2C2 Electronics box with fan by nazza

...sometimes the passive coolers aren't enough to cool the driver, so the print sometimes waits for them to cool...

thingiverse

free

Gen7 80mm fan mount by cae2100

...whole board, so it got the mosfets and motor driver, so i designed this. just print two and you...

thingiverse

free

3030 MKS Sbase stepper driver mount. hypercube evoution by warham

...and supports 128 microstep. max current:1.5a. microstep: 16 / 32 / 64 / 128. 6.bigger heat sink, better cooling....

thingiverse

free

Fox Leg Dust & Oil Seals driver tool by alexaxenty

...press fit my 32mm dust seals into a fox 32 fork. fits perfect with the following fox dust wipers:...

thingiverse

free

Needle File Handle w/ Thumb Set Screw by AlexC-Makerologist

...alexc-makerologist thingiverse this is a re-work of "parametric magnetic driver bit handle" to be used with needle file sets....

thingiverse

free

MOSFET breakout by Lanthan

...etc. it has been successfully tested as a spindle driver with 32 khz pwm and a 27 v power...

thingiverse

free

FT5 CoreXY Conversion by brantuck

...) [if you are using the stock board and driver use this: default_axis_steps_per_unit { 80, 80, 400, 410 }...

thingiverse

free

ToolTote by METdev

...hold 5 pliers, should fit most plier sets handles drill-driver is designed for a bosch 12v drill-driver. most drill-drivers...

thingiverse

free

Brushed motor iron man (foldable too) by Iwanestem

...i add heatsink on it for reduce heating. https://www.banggood.com/dalrc-naze32-rev6-mpu6050-32-bit-6-dof10-dof-flight-controller-for-multicopter-p-1020774.html?rmmds=search&cur_warehouse=cn https://www.banggood.com/micro-brushless-motor-driverfor-naze32-spracing-f3-flight-controller-p-1079832.html?rmmds=search&cur_warehouse=cn for arm i use 5mm carbon square: [wl-v262-17] rc...

thingiverse

free

18mm Sensor mount for StevenQ-NE-UK's E3D Mount by kfazz

...note: my machine has been upgraded with drv8825 stepper driver, with 1/32 microstepping also, your nozzle to probe delta...

thingiverse

free

Marlin Tronxy X5 by umbyo

...per unit. change #define default_axis_step_per_unit if you use other driver steps (calibrate your printer 3d!!) change board to flash...

thingiverse

free

BBP 3d printer by truby

...to the computer as a mass storage device stepper driver ? 5 to 6 drv8825 stepper drivers ? 1/32...

thingiverse

free

RPieces-TableTopXYZ by TGit-Tech

...kit ... $10.19 (4) 28byj-48 stepper motors with uln2003 driver ... $10.34 (~20) male to female dupont jumpers ......

thingiverse

free

MPCNC Stepper Reduction Gear by xyz100

...gear for mpcnc x and y steppers. standard a4988 driver are fairly weak that might result in steppers skipping...

thingiverse

free

RepRap Motherboard v1.2 by MakerBot

...32 i/o pins, arduino compatible. * 3 x stepper driver connectors with min/max inputs. * built-in sd card socket...

thingiverse

free

RepRap Motherboard v1.1 by MakerBot

...32 i/o pins, arduino compatible. * 3 x stepper driver connectors with min/max inputs. * built-in sd card socket...

thingiverse

free

Tevo Black Widow Nozzle Fan Duct by aarongreen

...have a fitted nozzle fan, and used stock stepper driver) dimensions: 41mm wide, 102mm long, 52.5mm high. weight: 32...

thingiverse

free

Ender 3 Case Raiser Spacer Mainboard Cover by patrickdarmawann

...into mks e3p, the heatsink of the stepper motor driver was intruding the electronic cooling fan, so i made...

thingiverse

free

ESP-32 RGB / Heater control [IoT room] by fawks03

...tft display 3x irf540n (r,g,b) (better: irlz44n) a4988 stepper driver (better: drv8825) 5v step-down converter photoresistor (gl5549) sht21 humidity/temperature...

thingiverse

free

Laser Dot - Pan & Tilt Gimbal (simple printing, involved integration) by chetjohnston

...up is an arduino talking through a couple of easydriver. the laser i used is a quarton laser module...

thingiverse

free

1/4 Drive Chuck with Collets by SuperSteve

...holder. it fits nicely in my battery powered bit driver simply find the collet that best fits your drill...

thingiverse

free

Box Button by rkweber404

...retaining washer from the opposit side using a nut driver to push aginst the retainer. you may want to...

thingiverse

free

Virtual Boy - TriPod Adapter and Quick Release Adapter by the16bitgamer

...it in (you'll need a thin and long screw driver place the b clamp into the machine screw and...

thingiverse

free

Ball Clock Old schoole and easier by Schrotty2019

...hence the motor mount and the battery compartment. the driver is part 17 required parts: https://www.amazon.de/gp/product/b07k3w78sq/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=utf8&psc=1 https://www.amazon.de/gp/product/b0133a2ftw/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=utf8&psc=1 the voltage...

thingiverse

free

Velleman Vertex K8400 Precise Pulleys by rafaljot

...14 : 24 they give less load to tmc driver it could produce maximum 1.7a . this combination prints...

thingiverse

free

1:24 Mercedes W163 1939 Grand Prix Winner by PartsDesigner

...will update the model so that there is a driver included in the assembly along with a guide. the...

thingiverse

free

Optical Bench Tool Holders by fbuehl

...thor labs) to hold small screwdrivers and xcelite hex driver. i used 1" diameter optical post(s) to mount it...

thingiverse

free

D-BOT 32 bit electronics enclosure by simon5492

...on my own machine skr v1.4 turbo + 2209 driver + ras pi 3b , works perfectly feel free...

thingiverse

free

Seckit SK-GO² dual z stepper with 360mm maxxed Z upgrade by caesar_1111

...the seckit sk-go² kit) operated with the tmc2209 stepper driver extruder is still the stock seckit sk-go² kit bl-touch...

thingiverse

free

Laser Galvo - Nema17/14 by Jamardo

...able to create straight lines. by using drv8825 stepper driver the vibrations had been reduced and the moves are...

thingiverse

free

R-CNC Z Axis Anti-backlash POM nut adapter for ACME 8mm-lead 2mm by Aze33

...or 1600 steps per unit for a 16 microsteps driver ...

thingiverse

free

ASCOM DarkLight Cover/Calibrator by iwannabswiss

...panel if desired. with the darklight, fully compliant, ascom driver the cover can be operated using the dlc windows...

thingiverse

free

Slim ODD Mount for Sliger S620 by FourOhFour

...#6-32 thumb screw or maybe a right angle screw driver for one of the psu screws. i used the...

thingiverse

free

Aster Hobby 86 005 LIVE STEAM - Gauge 1 / Spur 1 / 1:32 - Smoke deflectors / Windleitbleche by Robertino

...geography and the wind from the baltic see the driver#39;s of br86 steam locomotives on the islland of usedom...

thingiverse

free

Solar Panel Mount by bonnette

...a tight fit when installing them. use a screw driver to coax them into the hole. be sure to...

thingiverse

free

TRILOBE - Compact double-ended screwdriver bit holder by WaveSupportApparatus

...size (20 mm od and 30 mm long, or 25/32quot; od and 1 3/16" long in þe olde unitſ)...

thingiverse

free

Mini Drum Sander by verhoevc

...this too hard. a- i have therefore made the driverpart a plug that goes into the drum with a...

thingiverse

free

Smart Chassis 4WD by Noudje

...for the wemos board connected at the l298n motor driver boards: // right back define rb_fw 27 define rb_bw...

thingiverse

free

Dead simple split flap display by hakernia

...panel. note 3. there is no position sensor. the driver keeps counting the steps to identify the currently displayed...

thingiverse

free

CuttyBot Printable Assembly

...electronics inside. then a board, an esp-32 module, stepper driver and some small parts, and it all works extremely...

thingiverse

free

3 Axis Camera Gimbal/Stabilizer for Runcam 2 by p8blr

...camera - http://shop.runcam.com/runcam2/ selfie stick - https://www.amazon.com/gp/product/b00st1y2qu/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1 controller - https://www.ebay.com/itm/alexmos-3-axis-brushless-gimbal-controller-bgc-v3-3-drv8313-driver112600507586?sspagename=strk%3amebidx%3ait&_trksid=p2057872.m2749.l2649 joystick - https://www.amazon.com/gp/product/b01l6vg13q/ref=oh_aui_detailpage_o06_s00?ie=utf8&psc=1 motors -...

thingiverse

free

Ultimate Allen/Hex Key Screwdriver by EJ160

...inch / american: 1/8, 1/16, 3/16, 3/32, 5/32, 5/64, 7/32 7/64, 9/64. note: i have used left handed screw...

thingiverse

free

Stepper motor tune-up aid by jpnurro

...caution when touching the live electronics !!! use non-conductive screwdriver with tuning the trimmers (or very steady hand :-)...

thingiverse

free

HO train Track Wall Mount Remix for fast printing by rakienholz

...room between the diagonal supports to fit a screw driver or long bit. screw holes are sized to fit...

thingiverse

free

TronXY X5s Auto Sensor Holder by JD_Printing

...3d touch sensor. you will need to update your driver board. i now use a 32 bit smoothieboard knock-off...

thingiverse

free

Small Lab Supply based on DPS5015 by joeyC

...400w supply from banggood as well, for about $32 https://www.banggood.com/ac-110v-220v-to-dc-48v-400w-8_3a-single-output-switching-power-supply-transformers-driverp-1092410.html?rmmds=myorder you will also need: sermos/anderson power pole connectors for...

thingiverse

free

AZSMZ Mini controller board and LCD board cases by KDan

...mounted to provide direct cooling for the stepper motor driver. the holes in the cases were sized with the...

thingiverse

free

OnStep for Seben EQ3 mount by RomanHujer

...rate 3.7:1 (1+46/17) :1 onstep config.xxx.h for a4988 stepper driver with 16 micro steps ra primary worm screw transver...

thingiverse

free

IOT Bedroom Lamp - ESP32 with 497 LEDs by arcademachinist

...wifi shield, or even esp32 with attiny85 as led driver my lamp can be controlled via built in webserver...

thingiverse

free

DIY bicycle chain clock - upcycled! by Jori

...to drive the motor with an a4988 stepper motor driver it makes one step every 36 seconds and has...

thingiverse

free

Delorean DMC-12 CTSY Light Switch Bracket by TripleCrank

...and a slotted hole for more stability. on the driver#39;s side there are two switches. i merged the two...

thingiverse

free

Web Radio by GottderDrachen

...7 inch raspberry pi lcd monitor screen display + driver board hdmi/vga/2a 16 gb sandisk ultra extreme micro sd...

thingiverse

free

SKR 1.3 & MKS SGEN L Board Setup Tutorial with TMC2208 UART

...sd card reader marlin 2.x optional lv8729 or other driver for extruder lcd12864 many lcd options supported! getting started...

thingiverse

free

Screwdriver holders (Flat/PH/TX/Hex) by mkfink

...10, 15, 20, 25, 30 hex: 3/16-in, 1/4-in, 5/16-in, 11/32in, 3/8-in, 7/16-in, 1/2-in, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm,...

thingiverse

free

Wade Bowden Extruder 1.75 filament by buba

...2x4mm. i use 0.4 nm stepper motors and drv8825 driver nozzle = 0.4 mm microstepping = 32 steps per...

thingiverse

free

Tronxy X5S MKS sbase config.txt by SgaboLab

...microstepping jumper to 32 microsteps, right corner near e2 driver smoothieware doesn´t support dual-z configuration. you will need an...

thingiverse

free

Bluetooth Headphones

...to get this all working. *dayton audio 40mm speaker driver (http://www.theloudspeakerkit.com/dayton-audio-ce38mb-32-1-1-2-mini-speaker-black-32) *csr8645 bluetooth chip from aliexpress (https://www.aliexpress.com/item/32918680156.html?spm=a2g0o.productlist.0.0.18e87dd0cckwtx&algo_pvid=5930dd66-486d-4061-8972-3daaa806198c&algo_expid=5930dd66-486d-4061-8972-3daaa806198c-4&btsid=766fac78-c467-40f0-b6a6-d4c50d9c54c5&ws_ab_test=searchweb0_0,searchweb201602_3,searchweb201603_52) *li-ion battery...

thingiverse

free

COB LED close up lens hood for Nikon (HB-32 67mm) lens by dpk76

...super cheap) ** make sure you get perpetrate led driver. in most cases they will supply them for installation...

thingiverse

free

V-King CoreXY V2.0 | New 2020 Update by 3D_PRO

...y travel -- new 32 bit controller with silent driver for high speed and quality low noise 3d printing...

thingiverse

free

PS-240 X-Frame Quadcopter - X-Quad by ps915

...eschttp://www.banggood.com/4x-fvt-littlebee-30a-esc-2-6s-blheli-supports-oneshot125-for-rc-multirotors-p-1031943.html?p=3r26141006882201412n flightcontrollerhttp://www.banggood.com/upgrade-naze32-f3-flight-controller-acro-6-dof-deluxe-10-dof-for-multirotor-racing-p-1010232.html?p=3r26141006882201412n pdb + osdhttp://www.banggood.com/mxk-power-distribution-board-pdb-with-osd-bec-output-5v-12v-3a-lc-filter-for-cc3c-naze32-f3-p-1031375.html?p=3r26141006882201412n propellerhttp://www.banggood.com/2-pairs-dalprop-5040-t5040-3-blade-pc-propeller-cw-ccw-for-qav250-zmr250-240-rc-multirotors-p-1056219.html?p=3r26141006882201412n lipohttp://www.banggood.com/giant-power-dinogy-1300mah-14_8v-4s-65c-lipo-battery-for-rc-airplane-multicopters-p-1033106.html?p=3r26141006882201412n camerahttp://www.banggood.com/foxeer-hs1177-sony-600tvl-ccd-2_8mm-ir-mini-fpv-camera-5-17v-with-bracket-p-1047125.html?p=3r26141006882201412n videotransmitterhttp://www.banggood.com/skyzone-upgrade-ts5823s-40ch-5_8g-200mw-av-transmitter-module-rp-sma-female-p-1017491.html?p=3r26141006882201412n ledshttp://www.banggood.com/5pcs-cjmcu-8-bit-ws2812-5050-rgb-led-driverdevelopment-board-p-961344.html?p=3r26141006882201412n http://www.banggood.com/matek-ws2812b-led-board-with-5v-buzzer-for-naze-32-skyline-32-flight-controller-p-991715.html?p=3r26141006882201412n project by...

thingiverse

free

Anet A8/AM8 to Hypercube Evolution Upgrade Path - Phase II Remix by heatvent

...24v heated bed skr v1.3 32-bit board tmc2208 silent driver various 3d printed upgrades bill of materials (purchased): qty...

thingiverse

free

KLAMP - IKEA lamp hot air gun holder by zenekNY

...probably get away with tightening them using a screw driver and pliers but they loosen up sometimes and i...

thingiverse

free

Diatone ZMR 160, 180, 200 WS2812 5050 RGB LED / Buzzer Holder & Bumper by SnappyFPV

...led strips: cheapest: http://www.banggood.com/diatone-ws2812-ws2812b-rgb-led-board-5050-for-naze32-cc3d-p-1026673.html?p=hp210612749272015022 or direct from diatone http://www.diatone.hk/goods.php?id=145 http://www.banggood.com/cjmcu-8-bit-ws2812-5050-rgb-led-driverdevelopment-board-p-958214.html?p=hp210612749272015022 http://www.banggood.com/8-x-ws2812-led-strip-5050-rgb-for-arduino-trinket-gemma-p-978363.html?p=hp210612749272015022 http://www.banggood.com/matek-8-bit-ws2812b-rgb-5050-highlight-led-for-naze32-cc3d-p-983608.html?p=hp210612749272015022...

thingiverse

free

5-32 Deck Gun - US Navy

...structure so it should be removed with a thin screwdriver it should pry right off. the base also has...

thingiverse

free

Nema 17 belt drive roller blind by Junkmail90210

...scope of what i'm doing now... here's some usefull information.https://electronics.stackexchange.com/questions/384522/how-do-i-wire-a-tmc2130-stepper-motor-driverto-an-arduino-uno-in-order-to-contr/518984#518984 included: i've uploaded my fusion working files (it's a...

thingiverse

free

Honda Element Nalgene Cup Holder

...few different designs to appeal to each type of driver maybe you want a place for your smartphone or...

thingiverse

free

Azteeg X5 Mini v3.0 case for aluminum frame by ckitching

...tries to route airflow around the sensitive components (stepper driver, microcontroller and mosfets). an azteeg x5 2.0 may fit...

thingiverse

free

Argentina - 3d Printed CNC by JuanitoMaker

...un arduino uno con su shield cnc y 4 driver pololu. es grande la maquina por lo que los...

thingiverse

free

Mighty Mega Board :p by johnnyfp

...thermocouple support. onboard rgb led support. selectable 12v,24v,36v stepper driver. expandable, and if you so choose not to have...

thingiverse

free

Macro Rail by JoseAngel

...pues el motor no necesita mucha potencia y el driver puede ser alimentado sin refrigeración forzada. un final de...

thingiverse

free

Cl-260 Firmware for MKS-Gen V1.4 / V1.3 and DRV8825 by ForenSeil

...can be bought cheap as set on aliexpress drv8825 driver are more powerful, slightly quieter and slightly higher resolving...

thingiverse

free

Automatic Pellet Feeder for Shrimp Aquarium

...5v elegoo 28byj-48 uln2003 5v stepper motor + uln2003 driver board or equivalent 2x m3 screws (2.3mm head height)...

thingiverse

free

MiniPlan v5.1 - Body remixed by netoobuntu

...3x 6pcs-x-emax-es08mdii : http://www.ebay.fr/itm/281560493187 1x 32 channel servo control driver board : http://www.ebay.fr/itm/171924237386 1x dc-dc 5v 3a buck :...

thingiverse

free

Anchorable Shelf Leg for scrap wood shelf by Robert_White

...choice (machine screw to attach l-clamp to leg), screw driver and a scrap 3/4" board. copy/pasted description from my...

thingiverse

free

Brushless R/C Racing Hovercraft by jscaylor

...or rotary tool (dremel) 1/16" twist drill bit nut driver or socket for prop nuts xacto knife or razor...

thingiverse

free

Automated Dog / Cat feeder Nema17 Version 1.11 by Edd77

...version 1.0 elektronicbox wemos d1 r2https://de.aliexpress.com/item/wemos-d1r2-analog-wifi-d1-r2-integration-of-esp8266-32-mb-flash-form-factor-for-ard/32771534918.html?spm=2114.010208.3.2.dpzf9f&ws_ab_test=searchweb0_0,searchweb201602_2_10152_10065_10151_10068_436_10136_10157_10137_10060_10138_10155_10062_10156_10154_10056_10055_10054_10059_100032_100033_100031_10099_10103_10102_10101_10096_10147_10052_10053_10050_10107_10142_10051_10084_10083_10080_10082_10081_10177_10110_10111_10112_10113_10114_10037_10181_10180_10183_10182_10185_10033_10184_10032_10078_10079_10077_10073_10186_10123,searchweb201603_1,ppcswitch_3&btsid=02ebe506-6ca8-4f2c-a45e-abafab09fb45&algo_expid=2be2a2e0-f030-44c9-bfb9-c43d8ed61e90-0&algo_pvid=2be2a2e0-f030-44c9-bfb9-c43d8ed61e90 motor shield tb6612 pca9685https://de.aliexpress.com/item/motor-stepper-servo-robot-shield-for-arduino-i2c-v2-kit-w-pwm-drivertop/32279035471.html?spm=2114.13010608.0.0.llausz software espeasy https://github.com/letscontrolit/espeasy/releases version 0.9 -06.05.17- new bowl for...

thingiverse

free

OpenHASP Dual Gang Smart 3.5" Touchscreen Switch by Lbarrosoneto

...-d touch_cs=21 -d touch_driver=2046 ; xpt2606 resistive touch panel driver -d spi_frequency=27000000 -d spi_touch_frequency=2500000 -d spi_read_frequency=20000000 ;endregion connect the...

thingiverse

free

DIY MMU2S clone

...use in my printer lv8729 extruder driver (1)https://www.aliexpress.com/item/lv8729-stepper-motor-driver-4-layer-substrate-ultra-quiet-driver-lv8729-driver-support-6v-36v-full/32812173457.html?spm=a2g0s.9042311.0.0.27426c37nc13mz tmc2209 (x/y)https://www.aliexpress.com/item/pre-sale-bigtreetech-tmc2209-v1-1-uart-stepper-motor-driverstepsticks-mute-driver-vs-tmc2208-tmc2130/33028054557.html?spm=a2g0s.9042311.0.0.27426c37ozld9y skr...

thingiverse

free

Slotcar Race center by VolkerHochholzer

...count down laps advantage (laps in advance) for weak driver or slower cars or compensation for unbalanced track start...

thingiverse

free

Anet AM8 Y Axis Lead Screw Drive System

...course i run marlin on skr 1.3 32 bit driver boards. this is going to take some work to...

thingiverse

free

iM8 3D Printer Frame Anet A8 Tronxy 802m i3 Prusa by billpealer

...you'll need some basic tools, hack saw, drill, screw driver.. the same tools that came with the 802m or...

thingiverse

free

Automated Cat(Dog) feeder Nema17 Version 2.02 by Edd77

...printer steuerunghttps://www.letscontrolit.com/wiki/index.php?title=%22adafruit_motor_shield_v2%22 elektronicbox wemos d1 r2https://de.aliexpress.com/item/wemos-d1r2-analog-wifi-d1-r2-integration-of-esp8266-32-mb-flash-form-factor-for-ard/32771534918.html?spm=2114.010208.3.2.dpzf9f&ws_ab_test=searchweb0_0,searchweb201602_2_10152_10065_10151_10068_436_10136_10157_10137_10060_10138_10155_10062_10156_10154_10056_10055_10054_10059_100032_100033_100031_10099_10103_10102_10101_10096_10147_10052_10053_10050_10107_10142_10051_10084_10083_10080_10082_10081_10177_10110_10111_10112_10113_10114_10037_10181_10180_10183_10182_10185_10033_10184_10032_10078_10079_10077_10073_10186_10123,searchweb201603_1,ppcswitch_3&btsid=02ebe506-6ca8-4f2c-a45e-abafab09fb45&algo_expid=2be2a2e0-f030-44c9-bfb9-c43d8ed61e90-0&algo_pvid=2be2a2e0-f030-44c9-bfb9-c43d8ed61e90 motor shield tb6612 pca9685https://de.aliexpress.com/item/motor-stepper-servo-robot-shield-for-arduino-i2c-v2-kit-w-pwm-drivertop/32279035471.html?spm=2114.13010608.0.0.llausz software espeasy https://github.com/letscontrolit/espeasy/releases new bowl for light barrier tcrt5000https://de.aliexpress.com/item/tcrt5000-infrared-reflectance-sensor-obstacle-avoidance-module-tracing-sensor-tracing-module/32550725135.html?spm=2114.010208.3.2.p1vniw&ws_ab_test=searchweb0_0,searchweb201602_2_10152_10065_10151_10068_436_10136_10157_10137_10060_10138_10155_10062_10156_10154_10056_10055_10054_10059_10099_10103_10102_10101_10096_10147_10052_10053_10107_10050_10142_10051_10084_10083_10080_10082_10081_10177_10110_10111_10112_10113_10114_10037_10181_10180_10183_10182_10185_10033_10184_10032_10078_10079_10077_10073_10070_10186_10123,searchweb201603_9,ppcswitch_3&btsid=a180e239-1d84-4696-881a-e686cd87a19b&algo_expid=45b95438-0319-4188-a1a3-5f675b7671a6-0&algo_pvid=45b95438-0319-4188-a1a3-5f675b7671a6...

thingiverse

free

Flexible belt driven extruder e3dv6 55mm/s with ninja by Shrodix

...donne après calibration un e step de 1822 avec driver de 32. la courroie est imprimé en semiflex ou...

thingiverse

free

OpenRC - 2WD micro crawler by JonasF

...27, 2016: i ordered a esp-32 and a motor driver tb6612fng, i think current november 2016 i propose a...

thingiverse

free

FDM Printer de Kleine Reus 300x300x900 by JobSmolders

...board i used does not support more than one driver per axis. you may get away with wiring the...

thingiverse

free

Open Source DLP-Printer "DLPrinter" by blender

...capacitor and 1/32 micro steps) to drive drv8825 stepper driver from gpio softwaredevelopment 2.1. express based webserver up and...

thingiverse

free

Box MKS Base 1.4 + mosfet + relay + TFT28 + WiFi + smoothers by Crishebe

...smoothers but maybe these make no difference to the driver mounted in my mks base. the relay is used...

thingiverse

free

<15$ 360°Cam-Rotator for Google Cardboard (Cellphone)Camera / 360°Cam-Rotator für Google Cardboard (Handy)Kamera by SolarGermany

.../ yourduino.com example software sketch small stepper motor and driver v1.5 06/21/17http://www.yourduino.com/sunshop/index.php?l=product_detail&p=126 /-----( import needed libraries )-----*/ include /-----(...

thingiverse

free

AC PrintrBot LC v2 X Bridge To Bridge Support by AlexC-Makerologist

...fairly easy to do especially with a power screw driver the screw sticking out of the back of the...

thingiverse

free

splitFlapClockRadio by iz2k

...msp430fr2476 mcu as splitflap controller 3 x uln2003 stepper driver 3 x opb733 reflective ir sensor 3 x drv5055...

thingiverse

free

Touch-Display with CO2-Sensor by BeneMerz

...software (only as reference, needs to adapted): pins for ili9341-driver needs to be defined in .h-file located in the...

thingiverse

free

poor man's telescope tracker by otherthing

...file connect the arduino nano (windows may install some driver) upload the program (you may need to check the...