thingiverse

free

x-carriage prusa i3 - drive extruder by lalala

...x-carriage prusa i3 - drive extruder by lalala thingiverse x-carriage prusa i3 - drive extruder

thingiverse

free

Direct Drive BMG Anycubic i3 Mega

... thingiverse bondtech direct drive for anycubic i3 mega. include bltouch holder (optimized for v6 hotend), pcb and chain holder.

thingiverse

free

E3d Titan Direct drive mount for Prusa I3 by oet

...e3d titan direct drive mount for prusa i3 by oet thingiverse a direct drive mount for the e3d titan for prusa i3

thingiverse

free

prusa i3 direct drive extruder by hakankocakoyun

...prusa i3 direct drive extruder by hakankocakoyun thingiverse extruder

thingiverse

free

driving wheel for Geeetech prusa I3 X by godler

...driving wheel for geeetech prusa i3 x by godler thingiverse this is driving wheel for belt

thingiverse

free

Prusa i3 MK2 Extruder With MK8 Drive for Wanhao i3/MakerSelect by 3DPropWorx

...d you're done. i should add, the only original part of my wanhao i3 is the frame and power supply. it runs on a mks base 1.4.

thingiverse

free

Dual direct drive for Prusa i3 1.75mm by marcaupaulo

...dual direct drive for prusa i3 1.75mm by marcaupaulo thingiverse dual direct drive for prusa distance 55mm

thingiverse

free

GEEETech I3 E3Dv6 + Bltouch + Direct Drive by ciui69

...geeetech i3 e3dv6 + bltouch + direct drive by ciui69 thingiverse carrello modificatohttps://www.thingiverse.com/thing:1587373

thingiverse

free

Motor base - drive extruder - wooden prusa i3 by lalala

...ve extruder - wooden prusa i3 by lalala thingiverse prusa base engine, can support the motor on the bow of our wooden prusa i3

thingiverse

free

prusa i3 - body for hot end, feeder direct drive and bowden adapter by lipki

...nd, feeder direct drive and bowden adapter by lipki thingiverse prusa i3 body for hot end feeder direct drive and bowden adapter

thingiverse

free

Prusa i3 Direct Drive Extruder by blomker

...rking length = 19.9mm outside diameter = 7.3mm wire diameter = 1mm load at minimum working length = 34.13n spring rate = 3.26n/mm

thingiverse

free

i3 Direct drive extruder mount by thekondrat

... also you need: extruder parts: http://www.thingiverse.com/thing:43411 motor mount parts: http://www.thingiverse.com/thing:137806

thingiverse

free

Anycubic i3 Mega Direct Drive Spool Holder [upgraded]

...will be uploaded at later stage it's in two parts, just glue the stopper. easier this way rather then printing with supports.

thingiverse

free

Endstop arm for Geeetech i3 [Unified Prusa i3 Extruder for Mk8 drive gear] by fehlfarbe

...i3 extruder for mk8 drive gear] by fehlfarbe thingiverse the extruder didn't reach my x-axis endstop so i created this part.

thingiverse

free

Extruder mount for i3 mk7 direct drive. by condac

...dit scad file to change to m4 or m3 size screw. use top part of you choice, i recommend http://www.thingiverse.com/thing:15718

thingiverse

free

Sunhokey Prusa I3 Compact Bowden Extruder, direct drive 1.75mm by ZiegeOne

...truder, direct drive 1.75mm by ziegeone thingiverse modified from http://www.thingiverse.com/thing:275593 vor sunhokey prusa i3

thingiverse

free

Reprapguru Prusa i3 dual e3d v6 Bowden (from Direct Drive)

...rapguru prusa i3 dual e3d v6 bowden (from direct drive) thingiverse dual e3d v6 direct drive bowden mod for the whole (200 mm)^2

thingiverse

free

Direct Drive Vert-Xtruder-REMIX FOR I3 by Mjacobs518

...d desktop printer it allowed me to be able to utilize my existing conditions. its made to slip over the top of a hexagon hot-end.

thingiverse

free

Prusa i3 rework Dual bowden extruder 1.75mm direct Drive ajustable by eMotion-Tech

...psable extruder drive on the prusa i3 rework structure (between plastic and motor) authors: thomas batigne hugo flye emotion tech

thingiverse

free

Direct Drive Anycubic I3 Mega by maciejaser

...rime amount 0.15-0.2 mm3 mm and retraction speed 55 mm/s & distance from 2 to 4 mm then model should be make fine. have fun

thingiverse

free

i3 direct drive extruder for J-head by silpstream

...arriage. this is inspired by the k-extruder (http://reprap.org/wiki/k_extruder), but allows for the proper mounting of 2 springs.

thingiverse

free

Prusa i3 MK8 Direct Drive Lightweight Box Mount Setup by Middleman

...riage, then add the fan and motors. update oct 2016: i have added bunjatec's circular fan mount for the i3 to the collection.

thingiverse

free

Prusa i3 X-Axis Motor Drive and Idler assemblies by Kannonballer

...ll. i have included modified an extruder mount and shroud assembly to fit on the x-carriage of the twelvepro i3 printer system.

thingiverse

free

Prusa I3 Direct drive extruder mount by Dcdesigns

...clearance of the z lead screws. i will also be adding a top the has mounting for a servo and the arm for the switch style probe.

thingiverse

free

Direct drive extruder Migbot i3 by Phil_Maddox

...countersink for machine screw ( screw csk) updated to rev 4 march 24th updated to rev 3 march 23rd updated to rev 2 march 22nd

thingiverse

free

Sunhokey Prusa i3 Direct Drive Extruder Mount by haste

... set direct drive deprecated. please use new version. updates: 10.01.2016 new version in http://www.thingiverse.com/thing:1257733

thingiverse

free

Compact PRUSA I3 Extruder, direct drive 1.75mm with fans by Marco222

...is a compact extruder, on which is mounted the motor with the gear wheel that drives directly the 1.75mm wire into your hot-end.

thingiverse

free

Anycubic i3 Mega Filament Holder (Direct Drive)

...ty print with abs and 100% infill. i did not try pla/less infill but i'm sure it will be alright as well. no supports needed.

thingiverse

free

Excentric pull for Direct drive extruder for Wilson or Prusa i3 rework by Alex18881

...ll for this extruder for prusa i3. very useful if you want to print in many colors. it allows to switch filament in 2 clicks :).

thingiverse

free

Prusa i3 direct drive extruder by modhappy

...our friend.) edit: just added my x-carriage which allows for an additional 25mm of build space on the x axis! have fun everybody!

thingiverse

free

anycubic i3 mega s direct drive titan extruder mount by fizy321

...ega s direct drive titan extruder mount by fizy321 thingiverse only used original parts and few m3 bolts and nuts for mounting

thingiverse

free

Hexagon Mount for direct drive extruder included with Folgertech Prusa I3 kit by tamarintech

... included with folgertech prusa i3 kit by tamarintech thingiverse this is a remix with slight adjustments for a hexagon hot end.

thingiverse

free

Prusa I3 Bowden Drive Frame Mount by Graptharshammer

...ill provide a good setup. printed at 1.2mm perimeters, 20% infill in pla using cura to slice. turned out just how i wanted it to!

thingiverse

free

Anycubic i3 Mega Spool Holder for Direct Drive by frasier2k

... the dimensions of the mounting part to my needs. the fixation is now more tight. the orignal was too loose for my point of view.

thingiverse

free

Direct Drive Extruder for Lembasbrot's 3-wheel X-Carriage (FLSUN i3 2017) by stuckpixel

...basbrot's 3-wheel x carriage. i'm currently running this on my flsun with no problems with a e3d v6 hotend. works great!

thingiverse

free

Prusa i3 as router CNC - X axis direct drive by c_e_martinez

...ations, giulio! you can improve the accuracy of x axis of your prusa by using direct drive method. like always, the rods are 8mm

thingiverse

free

I3 Mega BMG Direct Drive mk2.5

...an duct used is this one: https://www.thingiverse.com/thing:51414. i also added holders for a drag chain. but those are optional.

thingiverse

free

Anycubic i3 Mega Direct Drive - 40mm Part Cooler by timebandit91

...modified the part cooling model to fit a 40mm fan. it's one piece. keep in mind to print it with support on the heatbed only.

thingiverse

free

Prusa i3 Direct Drive Bowden Extruder for arcol.hu mini hyena by flow

...iverse fit exactly a nema17 and mini hyena (scrub screw on the flat side of the nema) http://shop.arcol.hu/item/mini_hyena_5mm

thingiverse

free

Direct drive extruder and cooling - CTC i3 by rasmusaaen

...ff0df22967229fe/e/09a3ecfbe3e3f7b007b0fd2c make sure to rotate parts correctly in slicer program before printing. printed in petg

thingiverse

free

Stephs Direct drive extruder for i3 Rework/Wilson V2 by StephS

...onshape. source: https://cad.onshape.com/documents/575b0c1ce4b0366acbd8a05f/w/6d607119412f8b4186dd2a1f/e/7517a7d5cebf41394236f059

thingiverse

free

Belt Drive Extruder for I3 by Zapphoid

...on the way in. it prints a little bit bigger so it can be filed to fit. 18-oct-2014 added the 30mm fan mount for filament cooling

thingiverse

free

Direct drive mini extruder for Mini i3 by misan

...t seems to cause no harm. lever and spring support, in orange in the pictures, come from http://www.thingiverse.com/thing:43411

thingiverse

free

Prusa I3 Direct Drive Extruder 3mm by alphapilot

...aliexpress.com/item/mk7-bore-8mm-extruder-drive-gear-for-3mm-hobbed-gear-for-makerbot-reprap-mendel-high-quality/32462285369.html

thingiverse

free

Prusa i3 Direct Drive Bowden Extruder Fan Bracket by indieflow

...r finding i'm printing a lot with pla at the moment i decided to mount 2x 40mm fans to my bowden extruder for active cooling.

thingiverse

free

Openbuilds I3 Direct-Drive X Carriage by Redw04

... on the y-axis by about .5mm, the original wobbled a little bit on the 2020 extrusion because the wheels were too far spaced out.

thingiverse

free

Migbot Electron Prusa i3 Chinese E3D V6 Direct Drive Mount by Middleman

...giverse.com/thing:510957. 24/04/16 both files have been updated so that it fits the v6 extruder better than the previous version.

thingiverse

free

Prusa I3 E3D V6 Direct Drive Extruder WITH AUTO LEVEL by duncanlewis15

...g blocks. there is a mount for an auto leveling probe. not made yet but updates will be posted. need one to get my printer going.

thingiverse

free

Direct Drive MK8 Extruder Fan Duct (Prusa I3) by aajitlim

...pair with a downward facing blower fan attached to the front of your extruder setup. you'll want to get a fan mount separate.

thingiverse

free

Anycubic i3 Mega Spool Holder for Direct Drive

...ny l shape bit at the end of holder arm my whole support fell off :) i had to reprint just that section and hot glue it in place.

thingiverse

free

e3d heatsink 40mm fan adapter for MT2's Anycubic i3 Mega Direct Drive Mount

...n the e3d fan duct with the direct drive mount. normal fan ducts conlicts with the motor or part cooler on this particular mount.

thingiverse

free

Prusa i3 Direct Drive Bowden Extruder 3dita mod by ifala

....com/mk7-drive-gear.html pneumatic fittings ----> for m10 bolt more info and scad file modified onhttp://3dita.blogspot.com

thingiverse

free

FLSUN Prusa i3 Z-axis Belt Drive by blacklyquid

...ignhttps://www.thingiverse.com/thing:2641186 thank you! tinker cad linkhttps://www.tinkercad.com/things/9kbvh1gwvmq-belt-z-axis#/

thingiverse

free

Anycubic I3 Mega E3dv6 Direct Drive Extruder

...ho already printed the stock version (https://www.thingiverse.com/thing:3638402): parts extruder.stl & pcb.stl are identical.

thingiverse

free

prusa i3 direct drive extruder for e3d hotend and mk8 drive gear by LtData2k

...an duct fitting this design is available here. the extruder design was vaguely inspired by the hackerbot direct drive extruder.

thingiverse

free

X-Carriage for Geeetech Prusa I3 for Direct-Drive Belted Extruder by dintid

...der to make sure the extruder doesn't bumb into z-rods or top cross-bar or other things you might have added to your printer.

thingiverse

free

Anycubic i3 mega direct drive extruder by diy_th

...art cooling fan. quite nice result i think. adalinda as a test print. also added two pics from from extruder to show inner parts.

thingiverse

free

Wanhao I3 Direct Drive E3D v6 Zero Offset by jimisanchez

...oday. i updated the source and stl as i found there were two holes for mounting the stepper motor that were not aligned properly.

thingiverse

free

Hictop Prusa i3 3DP-11 Direct drive E3d V6 Mount by rich1051414

...ork for this backplate setup, however, the stock e3d fan will work as will the part cooling fan setup that came with the printer.

thingiverse

free

Reinforced Dragchain (X) for Anycubic I3 Mega Direct Drive Extruder

...howed that 17 link elements (9xb) work best. for those who printed the predecessor only parts a,b and mount_a need to be printed!

thingiverse

free

Direct drive prusa i3 E3D 608zz bearing by pablorosario

...dler "idler improve.stl" donde se modifico la posicion del rodamiento 2mm hacia arriba y 2mm mas cercano al drive gear.

thingiverse

free

Remix of Prusa i3 Direct Drive Bowden Extruder for all Jhead types by RRSk0

...ingiverse you can use it with any jhead. im using e3dv6 and hotend from 3draty.cz v2.0. jhead fits well without any brute force.

thingiverse

free

Prusa i3 Direct Drive Bowden Extruder by indieflow

.../www.emakershop.com/seller=1180 update added mounting plate for dual bowden extruders as requested! nozzles will be 33mm apart!

thingiverse

free

Direct Drive Extrusion (Extruder) @ Prusa I3 by Sailor96

...ock (1) j-head wedge uploaded 08-02-2016update inventor screenshots 08-03-2016update printed parts! 08-05-2016 the print is near!

thingiverse

free

Anycubic i3 mega filament spool holder for direct drive by Martin1111

...spool holder taht does not take a lot of space and is compatibile with a direct extruder. i printed is upside-down with supports.

thingiverse

free

GEEETech i3 Alu - body for hot end, feeder direct drive by lipki

...sion, soit après, en force, ou a chaud. place nuts (purple) in the slots. either during printing, or after in force, or when hot.

thingiverse

free

DD-MK7 - Prusa i3 Direct Drive Extruder

...ter x 5mm (middle groove) if you're planning to use a different hotend than the e3dv6, you will need to make a custom spacer.

thingiverse

free

Neustruder Direct Drive For Wanhao i3/Makerselect/Prusa i3, Ect. by Lukes_Laboratory

... 5-10mm m3 screws (3) m3 nuts let me know of the problems you have or how i can improve the instructions to help. happy printing!

thingiverse

free

Duplicator I3 Plus E3D (near)Zero Offset Direct Drive Adapter by c0deater

...'s e3d mounts for the wanhao duplicator i3 plus and its rebrands. this uses the "clampfix" part from evakens design

thingiverse

free

The Pursa I3 X-Axis Dual Extuder With Cable Chain Mount.And Updated Drive belt Keeper. by kb3lnn

...ign spark mechanical http://www.rs-online.com/designspark/electronics/eng/page/mechanical have a great day. :-) robert kb3lnn

thingiverse

free

E3D V6 lite6 Mount for direct drive extruder included with Folgertech Prusa I3 kit by cougar95900

...se.com/thing:650957 will need 2 m3 x 25mm screws 2 m3 x 16mm screws 2 m3 nuts 4 m3 washers 5/8/15 - added some instructions.

thingiverse

free

Direct Drive Chimera/Cyclops Extruder for Prusa i3 - Flexible filament ready by McSquid

...m bowden tubing various length 3mm machine screws extruder springs (i sourced mine from cheap soap dispensers) zip ties for wires

thingiverse

free

Dasaki MK8ish Direct Drive Extruder for Prusa i3 (MK7 drive gear) by dasaki

...otor/filament guide) if you are a curious maker / "tinker" / hacker, have a look at my blog:http://www.therandomlab.com

thingiverse

free

E3D V6 direct drive Prusa I3 clone (Anet) by hendrik6073

...the x endstop switch and added extra length to the y endstop. have to add possebility for the fan, don't use that so no hurry

thingiverse

free

Anycubic i3 Mega Direct Drive - (Mirrored) Bondtech BMG

...t and maybe one day i could design my own things to share....as i have plenty of ideas.....but i can't do anything with them.

thingiverse

free

Dasaki MK8ish Direct Drive Extruder for Prusa i3 (MK8 drive gear) by dasaki

...pen hardware license if you are a curious maker / "tinker" / hacker, have a look at my blog:http://www.therandomlab.com

thingiverse

free

Dasaki Compact Direct Drive Extruder for Prusa i3 (MK8 drive gear) by dasaki

...ly / filament guide) if you are a curious maker / "tinker" / hacker, have a look at my blog:http://www.therandomlab.com

thingiverse

free

Dasaki Compact Direct Drive Extruder for Prusa i3 (MK7 drive gear) by dasaki

...pen hardware license if you are a curious maker / "tinker" / hacker, have a look at my blog:http://www.therandomlab.com

thingiverse

free

Clamp DirectDrive Prusa I3 by bzijlstra

...clamp directdrive prusa i3 by bzijlstra thingiverse two clamps to hold the direct drive of a prusa i3.

thingiverse

free

Better Direct Drive Prusa i3 X-carriage by artentopl

...ched with screws- you have to use little longer ones on bottom mounts. if you have any questions or suggestions feel free to ask!

thingiverse

free

Geeetech i3 E3D direct drive extruder part cooling fan remix - Gen2 by Auravendill

...version is untested and will be changed soon. parts needed: 40mm40mm20mm radial fan 5015 blower fan a bunch of m3 screws and nuts

thingiverse

free

Direct Drive Prusa i3 idler remix by Podrez

...bb. also i have added 10mm m3 screw and some washer from piece of textolite which holds bb in place, and makes this thing sturdy.

thingiverse

free

Wanhao Duplicator I3 - Prometheus Direct Drive Bracket by coolzed76

...cooler, it is an already existing design that i modified - for 40mm fan - original thing: http://www.thingiverse.com/thing:211347

thingiverse

free

Direct Drive X Carriage Mount i3 BMG BLTouch by 3dsmitty

...sticks out. overall the whole bracket is very sturdy. included is the freecad file if you would like to modify it to your liking.

thingiverse

free

MK8 Drive Gear by laspiros

...mk8 drive gear by laspiros thingiverse prusa i3 rev 1.5 extruder's drive...

thingiverse

free

&struder extruder 1.75mm direct drive with adapter and optional magnetic quick fit for prusa i3 by danithebest91

... at 50 micron resolution here a video with extruder in action: https://www.youtube.com/watch?v=p8-8mjglpv4&feature=youtu.be

thingiverse

free

Prusa i3 bowden extruder with 9g SG90 servo auto bed leveling Work in progress WIP Fusion 360 mk8 drive gear by wensz

... fusion 360 mk8 drive gear by wensz thingiverse still work in progress, may change a lot, feel free to make a variations of this

thingiverse

free

Hypercube Prusa i3 MK2 Direct Drive Extruder by WF3D

...extrusions in the front downwards to access the whole printbed. further informations: https://www.youtube.com/watch?v=qn37tat7axy

thingiverse

free

Anycubic I3 Mega Direct Drive Mount by RTamer

...d flat, and not on the back as in the pic above. the supports will only be on the rear of the piece, and save a bit of filament.

thingiverse

free

Direct Drive Extruder Mount Sunhokey Prusa i3 by Wonky

...unt between the tensioner and motor. i have a e3d v6 but tested with original hotend that came with the kit and it works as well.

thingiverse

free

Direct drive extruder for Wilson or Prusa i3 rework by mrice

...where it can slip off the drive gear. i've also moved the filament path up a few mm closer to the gear for a similar reason.

thingiverse

free

Prusa i3 Rework direct drive X Carriage mount with servo support by betocabus

...ad the fixed version). update 3: -rotated the m4 nut holes to print without supports; -added extra material on the servo support.

thingiverse

free

Direct Drive Extruder System for E3D V6 (Prusa I3) by SuperBearFur

... 5mm id 4mm thickness as for the spring, i just used some bed springs and sandwiched it in between a m3 nut, washer, and m3 bolt.

thingiverse

free

Z-Axis drive decoupling by teratux

...decoupling by teratux thingiverse z-axis drive decoupling for prusa i3 with 8mm z-aaxis uses a normal m8...

thingiverse

free

Dual Titan E3D Direct Drive 1.75mm/3mm V6 Hotend Combo X Carriage Prusa i3 Style LM8UU by OpticDriver

...hat end up before installing and enabling the second titan :d also updated part files with final revisions, added 40mm fan shroud

thingiverse

free

Anycubic I3 Mega S Direct Drive Stock Extruder BL-Touch by nicodimarco

...issing a partcooling fan mount for a noctua nf-a4x10 but the fan mount from https://www.thingiverse.com/thing:3009290 should fit.

thingiverse

free

Anet A8 E3D V6 Direct Drive With Prusa I3 mk3s+ Fan Shroud by adhhero

...y methods, please refer to the original documents i referenced. thank you! this article was translated through google translator.

thingiverse

free

-=( jhead/Aluhotend version )=- Direct-drive hinged extruder for E3D/J-Head hot-end (Prusa i3) - remix by thejollygrimreaper

...ds that use the jhead mount , the original was based on the e3d which uses very different dimensions for it's mounting groove

thingiverse

free

Wanhao I3 2.1 & Micro Swiss Ninja Flex Drive Plate by ianolo80

...e, so just print fit and enjoy printing flex. i would welcome your feedback and also any comments for variations or enhancements.

thingiverse

free

Prusa i3 reworked 1.5 1.75 mm body extruder adapted for E3D V6 and MK8 Drive Gear by xpsion

...i am now working on an optical proximity sensor instead of the capacitive one much smaller and no issue with not metalic surfaces

thingiverse

free

Z endstop Prusa I3 by gestras

...e3d chimera mount on amadon's cyclops and chimera direct drive version...

thingiverse

free

Migbot i3 Bowden Kit (for E3D v6 Hotend) by fmorgner

...and printhead to convert the migbot i3 from direct drive to bowden. in case i forget to update the...

thingiverse

free

Anycubic I3 Mega - Titan Aero by Cedak007

...by cedak007 thingiverse remixed from: anycubic i3 mega direct drive - titaninductive sensor/probe holder for e3d titan aero anycubic...

thingiverse

free

Prusa i3 Hot End Carriage by nide101

...where the hot end (and the extruder if direct drivesits ...

thingiverse

free

Chimera Extruder Mount by skyalchemist0

...extruder mount for prusa i3 one bowden 1 direct drive ...

thingiverse

free

Direct Drive Extruder for Repraps by ez3india

...be used with most of the repraps including prusa i3 and its...

thingiverse

free

Prusa i3 MK2 Extruder/Hotend Assembly with mk10 Drive for Tronxy by PrimarilyPrint3d

...r it. for the most part you end up using the screws/nuts from the original prusa assembly guide. just be sure to measure lengths.

thingiverse

free

USB Flash Drive holder

...is not holding too tightly. fusion360 file included. prusa i3 mk3 20% infill 0.2 no supports...

thingiverse

free

Anycubic i3 Mega BMG Direct Drive (less vibrations) by Tim440

...g above the base with 100% infill also you have to use supports inside the model which can get hard to clean up if not tuned in.

thingiverse

free

Sunhokey Prusa i3 direct drive upgrade kit addtional by faulty

... of the filament https://cad.onshape.com/documents/e251162524b0b0a757782d38/w/40ac069f1ccf5d3a807ca030/e/0c2fbcf160cc5f640395353b

thingiverse

free

Prusa i3 Direct Drive Mounting Plate for 24mm-30mm X-Carriages + sensor and fan mount by Whitehawk2000

... version of the hotendbracket with a mount for a filament cooling fan will follow in the future as soon as my blower fans arrive.

thingiverse

free

Anycubic i3 Mega X-Carriage [MK4] OMG_V2 Dual Drive+NFCrazy by kasinatorhh

... rear mount. work in progress, bringup coming soon. originally posted and updated here: https://www.thingiverse.com/thing:4772109

thingiverse

free

Sunhokey Acrylic Prusa I3 X Axis Carriage by haste

...carriage by haste thingiverse move up extruder mount. direct drive extruder...

thingiverse

free

Roller Spool Holder for Anicubic i3 Mega

...simple and clean solution for i3 mega with direct drive upgrade. all you need: 2 x 608 bearings 130mm...

thingiverse

free

Long Right side Prusa i3 X axis endstop by tibuck

...thingiverse x axis right side end stop for direct drive ...

thingiverse

free

Folger Tech 2020 i3 Prometheus hotend support by coolzed76

...of the x axis. this is for a bowden drive setup and gives you an extra 25mm on the...

thingiverse

free

GT2 20T pulley for GEEETech I3 ProB by ybjack

...r geeetech i3 prob by ybjack thingiverse idler wheel for x,y driving belt. please insert into it the bearing of the stock parts.

thingiverse

free

Prusa direct extruder v.8 by Rafbe

...v.8 by rafbe thingiverse prusa i3 steel 1.75 direct drive extruder and 4/2 ptfe filament...

thingiverse

free

Y-Bearing for DIY Tech Shop i3a by Istale

...tech shop i3a by istale thingiverse custom y bearing drive tensioner for diy tech shop i3 alpha and...

thingiverse

free

Prusa i3 printable Extruder mount with bed leveling by TheKNTeam

...leveling by theknteam thingiverse this is a printable direct drive extruder mount for prusa i3 that contains auto bed...