thingiverse

free

Camera screw 1/4" by AxxAxx

...camera screw 1/4" by axxaxx thingiverse thumb screw with 1/4" camera thread

thingiverse

free

camera screw 1/4"

...camera screw 1/4" thingiverse anycubic photon

thingiverse

free

camera clip 1 by mango

...camera clip 1 by mango thingiverse this thing is part of:http://www.thingiverse.com/thing:51297

thingiverse

free

Wolfwhoop P-1 Camera Mounting by Kachu

...another tinywhoop camera mount. for a wolfwhoop p-1 camera from amazon. inductrix frame compatible, i installed on a betafpv 75

thingiverse

free

Mach 1 Frame Camera Mount by APEXFPV

...mach 1 frame camera mount by apexfpv thingiverse a protected race day quads mach 1 run cam swift micro camera mount.

thingiverse

free

Trifecta Camera Mount for 1/3" Sony 700TVL Camera by tweetip

... on a mouse ear and prints very well in abs. the top cover and platform can be downloaded for free from http://www.typhonfpv.com/

thingiverse

free

DJI Inspire 1 X5 Camera - 2nd camera fpv mount by GarrisonTECH

...amera fpv mount by garrisontech thingiverse this is a friction mount for a second forward facing camera when shooting dual mode.

thingiverse

free

DJI Inspire 1 Camera Lense Cap by boringkajj

...is to fit my dji inspire 1 camera. fits nicely....allowing camera to fit in it's dji inspire 1 camera case with no problems.

thingiverse

free

LorexBaby Camera Support. v.1 by spookypluto

...ns pulled the camera off the window sill and the arm that connects the camera to the base broke. so...i had to fix it, naturally.

thingiverse

free

vesa to camera bolt 1/4inch convert mounter by kantamochida

...vesa to camera bolt 1/4inch convert mounter by kantamochida thingiverse vesa to camera bolt 1/4inch convert mounter

thingiverse

free

Camera mount - 1/2 PVC pipe by jjarboe01

...ut a 360 degree camera out in a field, but you can print this and use for any camera you want stationary on a 1/2" pvc pipe.

thingiverse

free

1/4'' camera mount that Snaps on 2020 profile.

...mount which snaps on 2020 extrusion. suitable for small cameras like action cameras. feel free to use however you like and remix.

thingiverse

free

DJI Inspire 1 Camera connector protector cap guard by morg333

...ap guard by morg333 thingiverse a connector protector for the camera mount of the dji inspire 1 drone. if no camera is attached.

thingiverse

free

1 axis tilt fpv camera mount by llima

...esign from pit202 http://www.thingiverse.com/thing:696864, to fit a sony 700tvl camera. for now it is still missing the pan axis

thingiverse

free

Active camera Proto 1 by NaoUehara

...cv? ? face recognition ?driving servo ?camera rotating ?face captured ?transfer image to dropbox ?check your smart phone via wifi

thingiverse

free

1'' camera arm ball adapter by nanight

...systems. fits into nanight dive light mounting base. add an o-ring in the grove to increase friction.http://divelight.nanight.se/

thingiverse

free

camera stand on a 1/2in pipe by POLU

...a 1/2in pipe by polu thingiverse by using this model you can choose any length of pvc pipe to adjust the height for your camera.

thingiverse

free

1/4 unc Camera mount bolt. by andycap

... so i printed this up. it is 1/4 unc thread. should snap in a crash and help to save the camera from being ripped from mount.

thingiverse

free

Lumix DMC-TZ18 Camera Shelf +1 Battery by tgsparky77

...lumix dmc-tz18 camera shelf +1 battery by tgsparky77 thingiverse another camera shelf

thingiverse

free

DepthAI Oak-1 Oak-D Camera Mount by nlapenn

... has a hole for a standard tripod mount screw. i recommend adding a washer in between the tripod screw and the oak camera module.

thingiverse

free

Tête rotule 1/4 pour camera Ali by iPa64

...i by ipa64 thingiverse tête rotule filetage camera 1/4 pour la camera noname ali il faut récupérer la demi-sphère d'origine.

thingiverse

free

Pi Camera Clone Mount 1/4" by br34ker

...) to attach on an tripod-thread (1/4"). warning: it's not tested with the original pi camera - maybe it doesn't fit.

thingiverse

free

1/4 Camera Screw Male/Female by matickkk

...kk thingiverse 1/4 camera screw with male and female thread. dimensions : x= 20mm , y= 20 mm , z= 19 mm . thread diameter 6 mm.

thingiverse

free

FuriousFPV 1/4 CMOS Camera by aliimam

... here in case anyone needs an stl of the camera. its this one:http://furiousfpv.com/product_info.php?cpath=33&products_id=34

thingiverse

free

Camera Knee (1/4") by gshaxor

...camera knee (1/4") by gshaxor thingiverse i use it with my adapter 3/8"https://www.thingiverse.com/thing:4888563

thingiverse

free

Vive Controller Mixed Reality 1/4" camera mount by wirelessdreamer

...4 inch 20 x 1 1/2 inch wing screw along with a 1/4" washer and 1/4" lock washer to mount a logitech c920 camera on mine

thingiverse

free

Type A Series 1 TAM c270 Camera Mount by theintrospective

...h other camera mounts is that the gantry for the tam always got in the way. this thing, not so much. https://youtu.be/xobbukingtu

thingiverse

free

Camera Tripod Screw (1/4" - 20 UNC) by MasterFX

...erfx thingiverse a simple camera tripod screw with printed thread. stable enough for compact and dslr cameras with small lenses.

thingiverse

free

RV-12 Wingtip Handhold Camera Mount (1/4")

...amera mount for rv12 need 1/4"-20 studs, wingnuts, and very short 1/4"-20 bolts to finish. https://youtu.be/bh0ppclilfy

thingiverse

free

Upper Lock with 1/4" Camera screw hole by MikkelSimon

...mikkelsimon thingiverse upper lock with 1/4" camera screw for dji mavic air - drop device only! http://www.gimbal-guard.com

thingiverse

free

GEP RC Mark-1 Camera mount by STVk

...gep rc mark-1 camera mount by stvk thingiverse used pla plast

thingiverse

free

Micro pan roll tilt for 1 gram camera by Stomp

...l.html these servoshttp://www.hobbyking.com/hobbyking/store/__14839__hk_282a_single_screw_ultra_micro_servo_2g_0_2kg_0_08sec.html

thingiverse

free

UNC 1/4" to 5/8" camera bolt adapter by Solkane

...unc 1/4" to 5/8" camera bolt adapter by solkane thingiverse unc 1/4" to 5/8" camera bolt adapter

thingiverse

free

Eachine 1000TVL 1/3 CCD to HS1177 Style Camera adapter by Quadkiller

...pter by quadkiller thingiverse using this adapter you can fit an eachine 1000tvl 1/3 ccd camera instead of a hs1177 style camera

thingiverse

free

Rove-R2-4K Camera Holder with 1" ball mount

... 1" ball from below the camera, this is for you. print with supports everywhere and it will turn out nicely once cleaned up.

thingiverse

free

1/4" Screw for Camera Quick Release Plate by BCideas

... i needed a 1 / 4 "screw for tripod / monopod / camera quick release plate in a model,, so i modelled it and am sharing it

thingiverse

free

NEMA17 camera mount for 1/4"-20 webcam by urw

...s is a simple camera mount that i use on a mk3 and cr-10 for mounting a logitech webcam with a standard 1/4"-20 screw mount.

thingiverse

free

Attachment for strap Camera Pin 1/4'' 20 Theta by debyge

...attachment for strap camera pin 1/4'' 20 theta by debyge thingiverse attachment for strap camera

thingiverse

free

Olympus Camera OM-1 by Nicolas_T

...ate 12-3-2017: added an easy print version in 2 pieces that doesn't need support (not tested yet so please give me feedback).

thingiverse

free

Knurled 1/4-20 Camera Mount Screw by jazzychad

...ed a knurled 1/4-20 camera mount screw? here you go! if you want to customize further, i have included the onshape document link.

thingiverse

free

Camera Strap Buckle for 1 cm webbing by AddieMaker

... and pictures will be forthcoming. side note i doubt will matter: my camera (that this was designed for) is a canon rebel eos t6

thingiverse

free

1/3-inch SONY CCD Video Camera Mount by Yoniweb

...t by yoniweb thingiverse this mount should fit most 1/3-inch sony ccd video cameras. this mount is perfect for fpv or uav usage.

thingiverse

free

Mini Talon Foxeer Legend 1 + FPV Camera by Ycopter

... regulator and antenna. can be stuck down to the talon deck or fixed with velcro to allow deck changover. print at 100%b infil.

thingiverse

free

1/4" Knurled Camera Screw by Waverunner62

...you need a different length, size, mods... feel free to message me tested in pla and fit perfectly, see picture best regards eric

thingiverse

free

Camera mount 1/4" by Gardriel

...n a v-slot profile. thread length is 5mm, works with logitech webcams, like c920. you will need 1x m5 tee-nut and 1x m5x10 screw.

thingiverse

free

Drone camera mount Eachine 1000TVL 1/3 CCD

...ccd thingiverse this is a mount for eachine 1000tvl camera for a drone you can print it with just axis or with a boolt and a nut

thingiverse

free

TAM Series 1 2014 camera Logitech C270 mount v2 by meSEA

...tam series 1 2014 camera logitech c270 mount v2 by mesea thingiverse last model camera mount

thingiverse

free

20mm water pipe 1/4" camera mount by corelines

...ily moved with the hand. used in the corelines a2 lightbox. (http://www.instructables.com/id/a2-overhead-corner-leds-lightbox/)

thingiverse

free

FabScan camera mounting for PiCam 1 and 2 by db3jhf

...he center of the camera lens. so adjustment conditions for the screws are all the same. the side with the cable is the lower end.

thingiverse

free

Camera lens holder (49 mm) for 1 cm strap by Mquin123

... k1000 camera. the lens cap is 49 mm and the strap for the camera is 1cm in width. i tired of holding the lens cap in my pockets.

thingiverse

free

Sony Professional camera 1/4 scale

.../4 scale thingiverse this is the simplified version of a sony pxw-z450 for my gcse product made in solidworks sorted out in cura

thingiverse

free

Angled (25°) Push-Fit Camera Mount for Mini CMOS FPV Camera 1/4 HD sensor line 600 by t4b_

... line 600, available e.g. at http://www.hobbyking.com/hobbyking/store/__83353__mini_cmos_fpv_camera_1_4_hd_sensor_line_600.html .

thingiverse

free

Camera 1/4 inch screw by jonnor

... my printrbot simple wooden, worked best when printed at 95% scale. must use 100% fill for strength, layer thickness <0.1 mm.

thingiverse

free

raspberry pi LCD 1/4 Camera Adapter by UEPONYA

...raspberry pi lcd 1/4 camera adapter by ueponya thingiverse 1x 1/4 nut 4x m3x10 bolt 4x m3 nut

thingiverse

free

CAMERA HOLSTER 1/4inch by CRIZZZ

...ain a savety system so it wont fall out under any circumstances, but this never happened to me. ideas and feedback apprechiated.

thingiverse

free

adapter for attaching raspberry pi camera to a 1" optics mount by sbyrnes321

... breadboard. fyi: if you want to remove the camera lens and instead use the image sensor directly, there are instructions here.

thingiverse

free

FPV Board Camera Angle Bracket 1-Axis Servo Gimbal by polysquare

...ounting tape. i attached the bracket to the servo horn using hot-glue. designed using solidworks 2015. source files are provided.

thingiverse

free

3/8 - 1/4 Microphone camera tripod thread adapter by maxibor

... an adapter for mounting a camera (thread 1/4-20) on a microphone stand (thead 3/8-16). female thread: 3/8-16 male thread: 1/4-0

thingiverse

free

Microphone 3/8" to Camera 1/4" Adapter by LadyKhora

... camera tripod attachments. print on side to prevent shearing when threading on 1/4" side. suggest 100% infill for strength.

thingiverse

free

Medion S47015 Watertight WiFi Camera mount for Neptune SB-1 by Denko66

... put the medion s4715 watertight wifi camera in the front section of the wet hull of the thundertiger neptune sb-1 rc submarine.

thingiverse

free

1/4-20 Adapter for Articulating Camera Mount for Prusa MK3 by sneaks

...hread to the articulating camera mount bracket. a 3/4in 1/4-20 hex bolt is needed for this adapter. https://youtu.be/cqvskwfzgfe

thingiverse

free

2 in 1 phone and camera holder by dursung

...se with two changeable case it is possible to recording video if you have also a standing pole on which you mount base of tool.

thingiverse

free

1/4 to 3/8 camera tripod adapter by gorz92

...en too loose. the slot is to help inserting/removing it with a screwdriver. 100% infill obviously required for a part this small.

thingiverse

free

RUNCAM 1&2 FPV/HD camera servo pan mount by toolman207

...ket both runcam cameras fit nicely into the camera mounts but i've made a rubber band quick release system for piece of mind.

thingiverse

free

DJI Osmo Pocket Gopro and 1/4" camera tripod mount

... mount. in order for the camera mount to work you must insert a 1/4" nut before it closes up. i use an m600 command at 7.2mm

thingiverse

free

1/4-20 Camera mount clip by hesperaux

...sn't really just for akaso cameras. anything with 1/4-20 mounting should work. sketchup file is attached, as well as the stl.

thingiverse

free

Mavic Mini 1/4 camera mount by L3A_K1M

...rsion in the pictures. the actual file has it longer. i wanted to glue the screw to the mount but it seems very solid without it.

thingiverse

free

Gear 360 Camera Mount | DJI Inspire 1 or OSMO by 6gra2

...r 360 camera mount | dji inspire 1 or osmo by 6gra2 thingiverse support samsung gear 360 inspire 1 antiblock print scale 0,94¡¡¡

thingiverse

free

2020 mount Night Vision camera Raspberry Pi 1 2 3 4

...2020 mount night vision camera raspberry pi 1 2 3 4 thingiverse a mount for a raspberry pi with a night vision camera.

thingiverse

free

camera fix rod ( 1/4 20 ) by teinturman

...t cool down. each time i have not done this procedure, the printing was a fail.... but , please, print and use at your own risks.

thingiverse

free

1/4"-20 Camera Tripod Nut by roguemat

... camera tripod but didn't have a nut the right size. this is the nut i remixed with a bigger dial so you can hand-tighten it.

thingiverse

free

1'' ball camera arm ball for 20mm pvc tube by nanight

...water photography. works with nanight dive light acessories or any other 1'' ball arm system.http://divelight.nanight.se/

thingiverse

free

1/4 UNC 20 Camera Mount by NullzeroJP

...3 nut. slide cameramount-0.25in unc 20 screw-v1 into position screw the cameramount-0.25in unc 20 screw-v1 into your camera base.

thingiverse

free

FPV Camera holder for Runcam swift 1/2 by Kim32322

...fpv camera holder for runcam swift 1/2 by kim32322 thingiverse infill: 50% material: pla printer : geeetech prusa i3x

thingiverse

free

Hot Shoe to 1/4 inch Screw for camera by Feric

...hot shoe to 1/4 inch screw for camera by feric thingiverse it's for invert use of https://www.thingiverse.com/thing:995503

thingiverse

free

1/3-inch SONY CCD Video Camera Mount by imrahil

...1/3-inch sony ccd video camera mount by imrahil thingiverse same as oryginal but with horizontal hole

thingiverse

free

QAV250 15 Deg Camera Mount Sony HAD 1/3 by M8ker

...deg camera mount sony had 1/3 by m8ker thingiverse 15 degrees camera mount for qav250 frames should fit g10 v2 and cf version .

thingiverse

free

LEGO Stud Adapter for Articulating Raspberry Pi Camera mounted on SmartiPi Touch 1 by JacenRKohler

...uch 1 by jacenrkohler thingiverse i wanted to add the camera to the smartipi touch 1 case, so i modded the link with lego studs.

thingiverse

free

DJI Inspire 1 Sequoia Camera Mount by redline870

...oval, the sunshine sensor is mounted above the rear led, and the angle is adjustable for both the camera and the sunshine sensor.

thingiverse

free

Toyo Field Camera 110mm Lens Board (Copal 1 Shutter Hole) by nsandin88

...unctional part for toyo field cameras which accept 110mm lens boards. this model includes a hole for lenses in a copal 1 shutter.

thingiverse

free

1/4 Screw Camera adapter for Gopro Mounts by ViniG

... could not test more serious because i need a security cable (thing i recommend), and serves to use any compact camera as a gopro

thingiverse

free

1'' camera light arm ball for 20mm pvc tube by nanight

... 18x3.5 mm o-ring. works with nanight dive light acessories or any other 1'' ball arm system.http://divelight.nanight.se/

thingiverse

free

Nikon 1 lens adapter for Pentax K mount (Works Nikon 1 Cameras) by chubylive

...tter. these can easily be broken off. improvement that can be made: rotate pentax mount so it allows for easy change of aperture.

thingiverse

free

Arca Swiss camera plate clamp - 1/4" Standard Camera/Tripod mount by tarekx

...oles to one midpoint for mounting on a tripod that ideally has a pan/tilt or ball head on it. i will provide only the edited file

thingiverse

free

Caddx Turbo Micro F2 1/3" Camera Adapter

...ra mounting. https://www.banggood.com/umbrella-5-inch-230mm-6-inch-250mm-aluminum-hardware-cage-rc-drone-frame-kit-p-1314141.html

thingiverse

free

Camera Mount 1/4 inch by Mr_Mxlptlk

...rip for the m4x16 screw) don't make me responsible if anything goes wrong or breaks and damages your camera. use at own risk.

thingiverse

free

Thunder Tiger Neptune SB-1 camera mount by IXLR8EZ

...-) i also added vents for the air to escape out of the dome. the sketschup file is included, in case you want to change anything.

thingiverse

free

Small camera adjustable stand (with 1/4" hardware slots) by MrScottFletcher

... choosing. versatile, flexible, and scalable. the sjcam 5000+ holder can be found here:https://www.thingiverse.com/thing:4662376

thingiverse

free

Camera Adapter 1/4" ---> Fiberglass by kurm_de

...er of 11mm. now you can take pictures from increased position :) be careful, the adapter is not strong enough for fast movements.

thingiverse

free

Modified 1/4-20 paint pole camera mount by AdamGBaker

...se a shorter bolt. could be easily modified to use a 1/2 or 3/4" long screw, just by shortening the top section accordingly.

thingiverse

free

DJI Phantom 1 Double Go Pro Camera Mount - Front and Back View by erwingla

...d back of the phantom while flying. use double-sided tape between the phantom and the mount (it also eleminates the jello-effect)

thingiverse

free

2020 to 1/4"-20 Camera Mount by CreativeSpark

...ith a camera that is slightly tilted. i've included the step file for easy remixing, but please give credit if used. enjoy!

thingiverse

free

5/8" M to 1/4" F Microphone to Camera Mount Adapter by groundwater

... mount adapter by groundwater thingiverse screw adapter to attach a microphone clip to a standard camera mount e.g. on a tripod.

thingiverse

free

Olympus Camera OM-1 remix cut pieces by GerryPB

...rt and easier for painting. the one in the photo is scaled 50% for an rc scale model. will post pictures of it painted when done.

thingiverse

free

Studio Light to 1/4" Camera Thread Adapter

...nk screw for reinforcement. there are two different versions. the version one is the shown in the picture an the most common one.

thingiverse

free

32mm Board Camera mount for Cinetank Mk.1 by damightyj

...t is based off of other designs that fit so it should be fine. print it out, hot glue the camera into the area, and away you go.

thingiverse

free

gopro to camera 1/4" screw. connect any action cam by TechDante

...ct my ion camera to the gopro mounting system but did not want to wait for delivery. this is a two min thing made in 123d design.

thingiverse

free

PS3 Eye camera 1/4" mount, re-drawn by scottrlindsey

...laps to be voids, so it didn't slice properly for me. my version is redrawn entirely in sketchup and prints without issues.

thingiverse

free

Eachine 1000TVL Camera and FatShark 250mW Transmitter mount for 1/10 Buggy by yasindrn

...rse hello, eachine 1000tvl camera and fatshark 250mw transmitter mount for 2wd buggy rc10 b5m. i hope it will be useful for you.

thingiverse

free

12M lens adapter for Sony 1/3inch CCD Video Camera (FPV) by IdefixRC

... 26/6/2014: added a slim version of the mount to support additional cameras. please feedback in case it does not print properly

thingiverse

free

Case for 1/3 inch Sony CCD camera by egil

...the compact one with skirt, mounted on a simple pan/tilt device. the openscad file should allow easy tuning of most parameters.

thingiverse

free

FPV mount for [1/3-inch Sony CCD Video Camera 700TV Lines F1.2] Gopro compatible by spu

... camera 700tv lines f1.2 camera, used for fpv. it can easily be put on a gopro base mounting! moreover it is designd aerodynamic!

thingiverse

free

x520 FPV Camera Mount Sony Effio 700TVL 1/3 2.1mm by Tysonpower

...pv-hd-ultralight-camera-with-2_1mm-lens-ntscpla-for-fpv-rc-multicopter-p-1000385.html) and is quite okay for the realy low price.

thingiverse

free

Helmet mount for mobius 1 C2 action camera by JohnTikis

... link:https://www.banggood.com/mobius-new-version-wide-angle-lens-c2-1080p-hd-mini-action-camera-p-985644.html?cur_warehouse=cn).

thingiverse

free

Camera tripod to PVC 1/2" pipe bracket by teamwija

...u may also wish to cement the coupler in place with some hot glue or similar. screw tripod into open end of coupler. ??? profit!

thingiverse

free

SDX's Tripod Adapter for PS4 Camera Stand with 1/4"-20 female thread by SDX

... i printed the 10mm version. and i gripped my camera in the middle... so it doesn't lean to any side ;-) works well this way!

thingiverse

free

Side-Shot Camera Mount for 1" Scope Tube by madmunki

...m/thing:4689032 1" scope mounthttps://www.thingiverse.com/thing:4689031 screw knobshttps://www.thingiverse.com/thing:4707444

thingiverse

free

12M lens adapter for Sony 1/3inch CCD Video Camera (FPV) by spu

... adapter for sony 1/3inch ccd video camera (fpv) by spu thingiverse it is designd to fit in the standard mount, glue it on there

thingiverse

free

FPV Camera holder for Eachine 1000TVL 1/3 CCD 110 Degree 2.8mm Lens Mini FPV Camera by Jakov

...he base was splitted in three parts for a stronger build, so you will need to glue togeter. m3 screw needed for the folding joint

thingiverse

free

Modified Pi Camera Hanger for Qidi Tech 1 by malakid

...te from the angle you hold your head when your neck hurts the worst! :) watch the build from the comfort of your computer screen.

thingiverse

free

1/4-20 Camera mount for Suction Cup DVR Windsheild Mounts by lcwii

...need a 1/4-20 tap and die. i used a resin printer to make this but it is possible you could use a fdm printer to make it as well.

thingiverse

free

Camera adapter for Kaiser System V enlarger, replaces RA-1 by TTRCmedia

...er the holes where the nuts are put in and, if the camera is heavy and the printed part breaks, the camera will not fall down ;-)

thingiverse

free

GoPro 1/10 scale RC car mount action camera HSP Redcat by Fintech

...tion camera hsp redcat by fintech thingiverse i created to mount mounts. 1 for the front 65mm and one for the rear 62mm spacing.

thingiverse

free

Gimbal Yi camera on CG035 (1 axis) by patric123

...(vis 6mm) la commande gimbal est déjà intégrée dans cg035 de base sur le port 2 (attention: le fil signal du servo est au centre)

thingiverse

free

GoPro Mount adapter (male and female) to 1/4" UNC camera mount screw with a hole for ruthex threaded insert 1/4-20x12.7 by SibSerag

...t 1/4-20x12.7 compatible to modular mounting system (modularmounting) fusion360 and step files included. modifications welcome :)

thingiverse

free

Mount for 600TVL 1/4 1.8mm CMOS FPV 170 Degree Camera by nppc

...lt of the camera is 30 deg. distance between mounting holes is 15mm. height of the mount is 15mm. can print it in pla, petg, abs.

thingiverse

free

Foxeer Legend 1 camera baseball cap mount by bazzerh

...ay to mount a foxeer legend (mobius, runcam hd may also fit but untested) onto a baseball cap to allow some head mounted filming.

thingiverse

free

Ender 3 Camera Mount Standard 1/4 - 20 for Octopi with Nexigo GoPro and Others by mbrady6

... also a linear infill works best combined with infill overlap of 20%. v2 update - ball joints core filled in for added strength.

thingiverse

free

Kinect mount to camera tripod with 1/4-20 Nut by nrp

... modified version. kinect3c.stl is the original, for use with the attached .scad if you want to modify the thickness or nut size.

thingiverse

free

ET200 camera mount for Basher RockSta 1/24 4WS Mini Rock Crawler by Tummi

...d only for the power/video cable slot. 4 screws needed to mount the camera, but glue also works ;) sketchup source file attached.