thingiverse

free

12mm diameter FPV lens protector by Autocharge

...12mm diameter fpv lens protector by autocharge thingiverse print in tpu no supports

thingiverse

free

12mm FPV cam housing by Fully_Retractable

...heapest e-bay cams out there feel free to add to this design. slide camera into shell, and use the wedge to secure it into place.

thingiverse

free

fpv 12mm microcamera holder by heraldomedeiros

...also use hot glue or liquid tape to do this. print with over 50% infill for better resistance. please, share if you print it! :)

thingiverse

free

Micro 12mm Fpv Camera Mount 20 deg by M8ker

...ees printed in abs . 0.24 . i suggest print 2 at the same time to avoid overheating the part due to the sizes . or active cooling

thingiverse

free

GRL FPV PRO 2 Capasitor holder diameter 10mm and 12mm by RODINFPV

...grl fpv pro 2 capasitor holder diameter 10mm and 12mm by rodinfpv thingiverse capasitor holder for grl fpv pro 2 freestyle frame

thingiverse

free

12mm FPV camera mount for Tarot 250 or 280 and more by catslab

... lens diameter of 12mm on hand and wanted to mount it on the frame. so i made this support on openscad, printed it and shared it.

thingiverse

free

12mm FPV Cam Mount for ShenDrones Tweaker 180 by TroyDL

... forward aluminum standoffs with an interference fit. the holes fit 5mm diameter standoffs and are 27mm apart, center to center.

thingiverse

free

22/23XX Motor Mount 12mm Tube FPV by BlinkFPV

...gress, keep testing new things, if you wanna give a try here you can download the most updated release! enjoy and let me know! :)

thingiverse

free

Quadrocopter 12mm x 12mm leg by SQ9MDD

...thingiverse quadrocopter 12mm x 12mm leg longer leg for fpv ...

thingiverse

free

Bix3 FPV Canopy by deniboj

...of the original bix3 fpv canopy. you can use 12mm disc magnets to hold it in...

thingiverse

free

FPV camera lens cap fot the foxeer arrow

...lens cap for the foxeer arrow inner diameter : 12mm cap deep :...

thingiverse

free

Camera Mount FPV 45º - STX225 frame drone by wtrevine

...for stx225 lens 12 and 13mm - 10 and 12mm ...

thingiverse

free

tiny-whoop-marsupio by crisat

...with a square board whose side measures 11mm or 12mm ...

thingiverse

free

Transtec Laser S FPV Micro Camera Mount - 45deg

...2 but will fit most micro fpv cams with 12mm lens. modeled specifically for the transtec laser s frame...

thingiverse

free

Control Horn support by stevenadams3

...came from hk without these support plates. 9mm x 12mm x 1.6mm, 2.4mm...

thingiverse

free

Tail Rotor System For FPV Carbon Tube Tail Air Planes by Filatech

...with carbon tube tail boom tail boom would be 12mm carbon tube u need two pieces of 15x21x4mm slim...

thingiverse

free

DJI FPV gimbal protector for aftermarket lotus stickends

...remix to fit dangerousdanfpv's dji gimbal protector over the 12mm lotus stick...

thingiverse

free

XHOVER Vanover Camera Mount

...camera mount for micro sized fpv cameras with a 12mm outside diameter lens to mount on an xhover vanover...

thingiverse

free

FPV GPS stand by DengisKong

...the frame using zip ties. it is sized for 12mm or 1/2 inch...

thingiverse

free

Transtec Laser S FPV Micro Camera Mount - 50deg

...racer 2 but will fit any micro camera with 12mm lens. cam mount was modeled specifically for the transtec...

thingiverse

free

Panda280 3D Printed FPV Racing Miniquad by Filatech

...with folding arms. wtw: 280 mm body: abs/pc arms: 12mm carbon fiber tube you can use slim arm escs...

thingiverse

free

FPV-Racer Hammerhead 190 22xx Motors by btotherunner

...and v2 04.02.2016 --> publish the new version 2.11 (12mm spacer with 3mm and 6mm spacer) 06.02.2016 --> change...

thingiverse

free

TBS Caipirinha 2 - DJI Cam Mount by chixxi

...the front. you will need 2-4 m2 10mm or 12mm ...

thingiverse

free

Devo 7e Gopro / FPV Screen mount. by andreq

...on the original antenna. you'll need 1 countersunk m4 12mm screw 1 m4 nut 1 gopro type screw (m5?)...

thingiverse

free

JJRC H12C mount for Syma X5C-1 X5SC FPV by tgoacher

...clamp fits to the remote with four, m3 x 12mm bolts and nuts. the monitor mount should be fitted...

thingiverse

free

Space One FPV Formula One 220 X Edition Arm Guard Bumpers by Mr_Disintegrator

...a couple of design variations; lightest ones are the 12mm tall version with 1mm thick bottoms (3.75g). the thick...

thingiverse

free

Grasshopper 160 600tvl camera holder by Mlazgon

...camera:http://www.banggood.com/600tvl-14-cmos-2_8mm-90-degree-fpv-camera-palntsc-3_7-5v-p-1050485.html but other similar can fit. you will need 12mm m2 or similar...

thingiverse

free

rCamQuad by Roxeh

...fc. used hs1178 as fpv cam. booms are od 12mm id 10mm carbon fibre tubes in length of 180mm....

thingiverse

free

Eachine 700TVL FPV Camera and Transmitter ET200 Mount by rPawel

...in the camera mount plate are designed to take m2.5/12mm nylon screws. first, use metal screws to carve a...

thingiverse

free

intensewalkera h copter 12mm v1.3 by IntenseDef

...its end game is for it to be a fpv h-copter. i thought id upload it anyway so youtube...

thingiverse

free

ZMR250 10Deg 1806 motor mounts by Laggylarry

...for fpv racing. made for 1806 but will fit 12mm16mm motor mounts. these mounts could be used for anything...

thingiverse

free

Hydrophobe fpv camera cover by imgumby

...resistant as anything else. included are lens rings for 12mm thru 18mm and a copy of andy's hero7 case...

thingiverse

free

ZMR250 25mm Micro camera mount by pickled

...25mm tall camera mount that houses a very small 12mm wide camera like this http://www.ebay.com.au/itm/191877729760?_trksid=p2057872.m2749.l2649&sspagename=strk%3amebidx%3ait. i remixed dingleberry1's slanted...

thingiverse

free

Micro RC plane parts by ebay007

...tip is attached with ca. motor mount has a 12mm mounting hole pattern. the parts were printed in sls,...

thingiverse

free

Mini 3.5" FPV Monitor RC832 by Daniel9

...-rc832 fpv receiver ~13€ -3.5" lcd car monitor ~10-12€ -12mm on off button ~1€ what do you also need:...

thingiverse

free

iFlight Titan DC2 custom parts by jehe79

...kv motors caddx vista jhemcu ghf411 30a aio fc 12mm beeper crossfire nano rx printed with 0.2mm layer height...

thingiverse

free

Runcam Micro Sparrow Pod 30.5mm mount angle by rings

...by rings thingiverse it's pod for runcam sparrow witch 12mm lens outer size. posible it fit toother micro camera...

thingiverse

free

CORVIDAE CORVUS CORAX by nasenbaer

...260mm x-frame m3 nylon standoff sockethead hex screw´s m3 5-12mm 5x domehead hex screw m3 6mm 4x sockethead washer...

thingiverse

free

Brushless Motor Tube Mount (12mm tubes, 22xx & 18xx type outrunners) by OnkelPierre

...18xx type outrunners) by onkelpierre thingiverse for my latest fpv mini quad build i wanted to use tubular carbon...

thingiverse

free

Quad frame by touchthebitum

...motors : rcx h1306 3100kv (holes for motors : 12mm m2) cam foxeer vtx: ts5823 props : 4x4.5 rx:...

thingiverse

free

Mobius 3D FPV Cam by RCConcepts

...stereoscopic 3d vision lens for smart phone (from aliexpress) 12mm lens with 53deg fov (from aliexpress) 3m double-sided tape...

thingiverse

free

ALES ROTORS LITTLE100 BRUSHED QUADCOPTER by AdrianAE

...http://www.banggood.com/radiolink-r6ds-2_4g-6ch-ppm-pwm-sbus-output-receiver-compatible-at9-at10-transmitter-p-1077726.html?rmmds=search jf - 01 mini aio fpv camera http://www.gearbest.com/fpv-system/pp_443166.html 12mm buzzer 5v http://www.banggood.com/5-pcs-5v-electromagnetic-active-buzzer-continuous-beep-continuously-p-1035626.html?rmmds=search 4pcs foam ear plugs 2 pcs...

thingiverse

free

Flysky / Turnigy i6 Transmitter FPV Mount by Combustive

...a washer for mounting the fpv monitor (bolt approx 12mm deep with diameter to match your screen mount (mounting...

thingiverse

free

RunCam Micro Pod by rings

...thingiverse it's 1'st version pod for runcam micro witch 12mm lens outer size. posible it fit to foxeer witch...

thingiverse

free

Tarot TL250 bottom cover by KenVersus

...1mm cover is ideal. i have some 6mm and 12mm on order. printed at 0.2mm layer...

thingiverse

free

Skinny B*tch FPV racing frame by Mulder

...motors added arms for 4inch props: 1mm thinner for 12mm motor screw mounts (1806, 1407) added arms for 7inch...

thingiverse

free

Eachine VR007 Portable Screen Conversion by PyroPony

...to turn on or off the screen (5mm * 12mm all components of the eachine vr007 some wires hot...

thingiverse

free

losi lst rover conversion by sircrashalot

...adaptor was used to hold the gear to motor. 12mm composite tubes where used between shock tower body posts...

thingiverse

free

SK450 16mm carbon arm body by zxcvbn

...controller, i'm using a pixhawk lite. new body with 12mm wide mounts for more internal room, the old one...

thingiverse

free

X-Spider 250 by ssulti

...vtx antenna. to build : electronics 12pc of m3 (10-12mm sized bolts to secure top frame parts. 4pc of...

thingiverse

free

The Micro Zip (MK.2) by GameSharkster

...crazypony fpv mini camera. the standoffs are 3 by 12mm the bottom bolts are 3 by 10mm, and the...

thingiverse

free

HK Godiscover nose for Mobius brushless gimbal by chrishornby

...and 2 m3 nuts. you will also need some 12mm dia tube. i used carbon fibre but virtually anything...

thingiverse

free

XT60 inline power switch by Shikra

...wire 15cm 4 x screws (2.2 - 2.5mm * 12mm i used female from an old battery which if...

thingiverse

free

"TPU" FPV DRONE / CINEWHOOP by kowloonfpv

...fc: 2020 / 3030 motor mounting : 9mm / 12mm /16mm motor: bbb 1408 3600kv battery: 4s 1800mah weight:...

thingiverse

free

Skidmark X by jbalat

...and the cicada blheli s esc's (no more than 12mm wide). use 4 blade gemfan 3035 fiber reinforced props....

thingiverse

free

Coax2805-V1 by vgrsystems

...props for the best efficiency, 2 10a brushless esc 12mm clevis, 2mm threaded rod and 1,6mm screw for commands...

thingiverse

free

Mini Quad 250mm CC3D by alex12150

...vtx/vcr/cam : http://www.gearbest.com/rc-parts/pp_88921.html 4 x aluminium/carbon arms 80mm x 12mm (diameter), perhaps 85mm i am in process of testing...

thingiverse

free

AIO FPV Groundstation / Video-Tester for 5" LCD by MarenB

...cinch connector. there's also a provision to fit a d=12mm piezo buzzer for a low voltage alarm. and last...

thingiverse

free

GPS Mount for SAM M8Q GPS Module (or any module of similar size) by TMacFPV

...standoffs at rear of quad with distance between holes 12mm center-to-center of holes the mount weighs approx 4 grams...

thingiverse

free

GPS Mount for BN220 (or similar size GPS module) by TMacFPV

...standoffs at rear of quad with distance between holes 12mm center-to-center of holes the mount weighs approx 2 grams...

thingiverse

free

Micro quad frame by andoix

...fix top deck in place i just used four 12mm regular plastic stand-off, if 3d printed they may be...

thingiverse

free

Drone/FPV battery tray hooks by MacPara

...for lighter or heavier batteries. currently the stl has 12mm depth. the upper shape is a parabola, contact me...

thingiverse

free

Jellybean X by jbalat

...and the cicada blheli s esc's (no more than 12mm wide). use 4 blade gemfan 3035 fiber reinforced props....

thingiverse

free

FPV tricopter, foldable by P4man

...added a printable design. added middle decks for both 12mm and 12.5mm booms. fixed many "manifold" issues causing issues...

thingiverse

free

mini quad fpv racing 250/300mm by alex12150

...ubec fightcontroller/vtx/cam/vcr : http://www.gearbest.com/rc-parts/pp_88921.html aluminium/carbon arm : 80mm x 12mm diameter screwing or rizlans/serflex motors holes :...

thingiverse

free

Camera dome housing pan & tilt by poboy

...for assembly is as follows: tilt servo: 23mm x 12mm servo. this design was based on a hk 933...

thingiverse

free

Runcam Nano HD BeeEye Toothpick Canopy (for Shark Byte) by MrShutterBug

...plate. the widest part of the lens cannot exceed 12mm it should work with any "toothpick" style drone where...

thingiverse

free

Tiny Trak - Various Parts by SnappyFPV

...servo: https://www.banggood.com/6-x-towerpro-sg92r-mini-micro-servo-9g-2_5kg-for-rc-airplane-p-1164389.html?p=hp210612749272015022&utm_campaign=snappy&utm_content=chenyi resistor for 360 degree movement mod https://www.banggood.com/560pcs-56-values-1r-10m-0805-smd-resistors-kit-10pcs-each-value-p-1023047.html?p=hp210612749272015022&utm_campaign=snappy&utm_content=chenyi http://bit.do/lego-caterpillar-threadshttp://bit.do/m3-12mmcountersunk-screwshttp://bit.do/1s-5v-step-up-power-modulehttp://bit.do/1s-600mah-lipohttp://bit.do/frsky-8ch-pwm-micro-receiverhttp://bit.do/aio-fpv-cam-800tvl ...

thingiverse

free

FPV Display for Fatshark Receiver Module

...m3 nuts (for the case) 4x m3 10mm or 12mm screws (for the case) 4x m2 3.5mm or 4mm...

thingiverse

free

Peon 230 Floating FPV Cam Mount by TheFuzz1542

...it. the holes to mount the camera bracket are 12mm apart so they will fit nicely in the 6...

thingiverse

free

Realacc RX5808 Pro Split Receiver Case by hawaiianer

...whatever you can find. it fits the buzzer of 11,9/12mm diameter. the display module is kept in place using...

thingiverse

free

ZeroBot - "Off-Road" Version -- Raspberry Pi Zero FPV Robot by franciscorp

...1 kcd11-101 switch (easy to find) 4 m3 x 12mm bolts 4 m3 nuts update created a shrunk down...

thingiverse

free

Micro 85 FPV Quadcopter - 8.5mm Motors, Micro Scisky, Quanum Pico, FRF3_EVO Brushed, fx798t by t4b_

...40chhttp://www.banggood.com/fx-fx798t-5_8g-25mw-40ch-mini-transmitter-camera-combo-for-fpv-multicopter-p-1053038.html nylon spacer: 5.6mm x 12mm m3 nylon tapped spacerhttp://www.hobbyking.com/hobbyking/store/__29541__5_6mm_x_12mmm3_nylon_tapped_spacer_10pc_.html nylon screws (cut to length): nylon screw phillips head...

thingiverse

free

DJI FPV Video Out Monitor by shnlls_fpv

...inserts 4x m3x20 screws 10x m3x5 scews momentary switch (12mm short hdmi kabel mini hdmi to hdmi adapter micro...

thingiverse

free

Zeb'210 FPV Racer Quadcopter by ZeblodS

...hardware: 1.5x450x200mm carbon fiber sheet 8x hex threaded standoff m3x12mm 4x round threaded standoff m3x20mm 24x screw m3x6mm (for...

thingiverse

free

Runcam Nano HD BeeEye Toothpick Canopy (for Shark Byte) by MrShutterBug

...plate. the widest part of the lens cannot exceed 12mm it should work with any "toothpick" style drone where...

thingiverse

free

DJI Air Unit Enclosure - Actively Cooled by silverbullet126

...2 x 40mm fans (10mm thick) 4 x m3 12mm (to hold the fans) 4 x m3 nuts (to...

thingiverse

free

P-X FPV RACING DRONE by PerN84

...- camera mount (1 pc) designed for a hs1177 (12mm lens diameter) and secured with two tiewraps for easy...

thingiverse

free

Eachine Racer 250 Battery Tray by KDan

...racer 250 lower frame (pcb). one version is for 12mm long screws, and the other is for 16mm long...

thingiverse

free

Easy Fatshark Power Button Mod by cre8fpv

...(examples - not affiliated): plug/connector - https://www.ebay.com/itm/111386693144?chn=ps&mkevt=1&mkcid=28 switch - https://www.amazon.com/dafurui-latching-self-locking-pushbutton-stainless/dp/b08v5clw4q/ref=sr_1_2_sspa?dchild=1&keywords=12mmlatching+switch&qid=1618275754&sr=8-2-spons&psc=1&spla=zw5jcnlwdgvkuxvhbglmawvypufondzosku1nvfdu1cmzw5jcnlwdgvkswq9qtaznjyxmjnsn1hqotnxovvawtqmzw5jcnlwdgvkqwrjzd1bmdmznjuxmtngrfvrvtrmwdfdu1ymd2lkz2v0tmftzt1zcf9hdgymywn0aw9upwnsawnrumvkaxjly3qmzg9ob3rmb2ddbgljaz10cnvl ...

thingiverse

free

Invisible Drone by sh-hedge

...long)) 8x m3 screw (8mm long) 8x m3 screw (12mm long) 8x m3 square...

thingiverse

free

The BabyMOD : 2.5/3/3.5 inch HD FPV Frame by ledroneclub

...mount / 4 holes 3 and 3.5 inch : 9-12mm motor mount / 4 holes optional reinforcement braces for...

thingiverse

free

RC Crawler Tank by 10josh29

...40mm button head screws for the tracks m3 x 12mm button head screws for the frame m3 nylon locking...

thingiverse

free

Eachine Racer 250 camera servo tilt mount by KDan

...versions). there are two servo versions - one for 12mm long screws and one for 16mm screws. the small...

thingiverse

free

Tracked Inspection Bot (TPU) by CammServices

...1x 8mm m3 screw (rear) (button cap recommended) 1x 12mm m3 screw (front side opposite of servo output) 1x...

thingiverse

free

TriCOPTER600 by DAquad

...sizes . for the tricopter arms you will need 12mm wood sticks cutted down to 300mm -------------------------------------------------------------------------------------------------------------------------- recommended tools...

thingiverse

free

fpv 10 turn helical antenna for 5.8ghz by quix

...space for the nut. height of the cavity is 12mm high, so no need to hurry. in makerware i...

thingiverse

free

X550 Quadcopter by MazaaFIN

...m3 nut + washer (arms) 20 (+2*) x ø3mm 12mm self-tapping screw for plastic (body, deck, bottom, gimball*) 1...

thingiverse

free

Huracán by Ace01

...build. also new dys ecs's that fit in the 12mm tube arms. http://www.emaxmodel.com/fpv-controllers/emax-skyline32-osd-flight-controller-advanced.html fcu http://us.banggood.com/wholesale-warehouse-dys-xm-seris-xml20a-blheli-mini-20a-esc-for-high-kv-power-electronic-speed-controller-wp-usa-1025915.html 10/22/2015 posted photo of...

thingiverse

free

Simple V-tail quad copter by slowjoe170

...from a v-tail to an h-quad. i had some 12mm carbon tube left over from a tilt-rotor project, so...

thingiverse

free

Tweaker5 XT60 + SMA Antenna Mount + Piezo Buzzer Mount for KK2 KK2.1 by jbleazie

...remix of arakon's mount. added a holder for a 12mm buzzer. i wanted to stop hot-gluing mine to the...

thingiverse

free

Armattan Chameleon X4R-SB, TBS Unify Pro, LED and Beeper mounts by jangrewe

...my runcam swift 2. the clip will fit a 12mm diameter beeper. there are cutouts in both the rx...

thingiverse

free

GOA Breeze : 3 inch HD/Analog racing frame by ledroneclub

...low profile build. specifications 3 inch truex layout (unibody) 9-12mm motor mount whoop aio (26x26mm) and 20x20 fc mount...

thingiverse

free

Project #MicroLongRange [3 Inch version]

...stack: 20x20 only cam mounts: 19mm micro motor mounts: 9-12mm 4-hole standoffs: m2x25 and m2x20 build recommendations the build...

thingiverse

free

Martian rover by Larkin_Michael

...on hobbyking:https://hobbyking.com/en_us/133rpm-brushed-motor-w-75-1-gearbox.html https://hobbyking.com/en_us/294rpm-brushed-motor-w-34-1-gearbox.html 12mm hex connector: https://aliexpress.ru/item/1670286825.html?spm=a2g0o.productlist.0.0.6fbe2108al4axd&algo_pvid=0f00b1e6-0a00-4238-a3ca-65d32f988731&algo_expid=0f00b1e6-0a00-4238-a3ca-65d32f988731-8&btsid=0b8b035a15963777365086070e5443&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ wheels: https://ru.aliexpress.com/item/4pcs-rc-car-1-10-hsp-12mm-racing-wheel-rim-tires-diameter-115mm-width-55mm-suitable/32817164528.html?spm=a2g0v.search0104.3.17.nmwdjp&ws_ab_test=searchweb0_0,searchweb201602_0_10152_10151_10065_10344_10068_10345_10342_10343_10340_10341_10543_10541_10084_10083_10307_10301_10539_10312_10313_10059_10314_10534_100031_10604_10603_10103_10605_10596_10107_10142,searchweb201603_33,ppcswitch_0&algo_expid=16021120-6e5c-4f2d-850e-684c7df79624-2&algo_pvid=16021120-6e5c-4f2d-850e-684c7df79624&rmstorelevelab=2 https://ru.aliexpress.com/item/gwolves-4pcs-rc-tires-rim-wheel-for-1-10-hex-hubs-12mmscale-models-rc-car/32814245698.html?spm=a2g0v.search0104.3.45.4qawb5&ws_ab_test=searchweb0_0,searchweb201602_0_10152_10151_10065_10344_10068_10345_10342_10343_10340_10341_10543_10541_10084_10083_10307_10301_10539_10312_10313_10059_10314_10534_100031_10604_10603_10103_10605_10596_10107_10142-10152_10151,searchweb201603_0,ppcswitch_0&algo_expid=f0d7f74a-346d-46f9-91b3-e9b3c3d30bb0-6&algo_pvid=f0d7f74a-346d-46f9-91b3-e9b3c3d30bb0&rmstorelevelab=0 shock absorber: https://ru.aliexpress.com/item/hsp-2-108004-08001-08058-08041/32843766284.html?spm=a2g0v.search0604.3.75.7fb37f4bqqxwmr&transabtest=ae803_5&ws_ab_test=searchweb0_0%2csearchweb201602_2_10065_10068_10890_319_10546_317_10548_10696_453_10084_454_10083_10618_10307_537_536_10059_10884_10887_100031_321_322_10915_10103_10910%2csearchweb201603_6%2cppcswitch_0&algo_pvid=9eeca0a4-2fc0-4aeb-8047-264d3b52c99c&algo_expid=9eeca0a4-2fc0-4aeb-8047-264d3b52c99c-10 shock absorber: https://ru.aliexpress.com/item/4pcs-for-1-18-wltoys-a959-upgrade-parts-aluminum-shock-absorber-front-rear-a949-55-fit/32704317971.html?spm=a2g0v.search0604.3.113.7fb37f4bqqxwmr&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10890_319_10546_317_10548_10696_453_10084_454_10083_10618_10307_537_536_10059_10884_10887_100031_321_322_10915_10103_10910,searchweb201603_6,ppcswitch_0&algo_expid=9eeca0a4-2fc0-4aeb-8047-264d3b52c99c-15&algo_pvid=9eeca0a4-2fc0-4aeb-8047-264d3b52c99c&transabtest=ae803_5 hexagon ball end:...

thingiverse

free

X-Class Pipe Quad by Ollzer

...attaching the motor mount on the arm (3mm x 12mm is just fine) 16pcs m3 10mm bolts for attachint...

thingiverse

free

Mini 3D-printable crossbow by Bribro12

...the mini crossbow are roughly 55mm by 42mm and 12mm high. all parts are printed with my he 3d...

thingiverse

free

Rollkage Camera Mount for Toothpick quadcopters by Haku3D

...your own for now! :) direct download from my website:http://www.haku.co.uk/3d/rollkage_camera_mount_10mm.stlhttp://www.haku.co.uk/3d/rollkage_camera_mount_11mm.stlhttp://www.haku.co.uk/3d/rollkage_camera_mount_12mmstlhttp://www.haku.co.uk/3d/rollkage_camera_mount_13mm.stlhttp://www.haku.co.uk/3d/rollkage_camera_mount_14mm.stlhttp://www.haku.co.uk/3d/rollkage_fc_protector.stl you can sell prints of this, but don't overcharge,...

thingiverse

free

Project #MicroLongRange

...stack: 20x20 only cam mounts: 19mm micro motor mounts: 9-12mm 4-hole standoffs: m2x25 and m2x20 build recommendations this frame...

thingiverse

free

E-Gor by greatwolf

...the wheelholder. attach the legs with 3mm screws between 12mm and 18mm long. to summarize the summary, to build...

thingiverse

free

Mini Drak Nose Camera Mount by billyd

...screws to the base with 3x m2.5 screws (about 10-12mm long is plenty. the hex nuts are captured in...

thingiverse

free

Chasis 1/10 Adaptable by dukedoks

...m3 8mm 4x m3 8mm countersunk head 14x m3 12mm 2x m3 washer 34x m3 nut 4x bearings 8x12x3,5mm...

thingiverse

free

MX105 by SK-Polymer

...and i can use them on future projectshttps://www.amazon.com/gochange-160pcs-metric-stand-off-screws/dp/b01c9q9wew/ref=sr_1_2?ie=utf8&qid=1482709962&sr=8-2&keywords=nylon+m3 11)standoff 12mmbuy this or print this 12)battery strap-the length will depend...