grabcad

free

Ultralight GE Engine Bracket - 9.92% of original weight

... the perfect 10 (almost exactly 10% of the original mass) version is slightly heavier, and slightly stiffer about the bolt face.

grabcad

free

GE jet engine bracket

...ge-jet-engine-bracket-challenge. the weight reduction is 76,41% equal to the original bracket. original bracket weight: 2.05167kg new bracket weight:...

grabcad

free

GE Jet Engine Bracket

...ge jet engine bracket grabcad original bracket weight 4.523 lbs - new design bracket weight...

grabcad

free

Welded GE jet engine bracket lighter

...unwelded and 71,721% for the welded, equal to the original bracket. keep in mind, this is a welded bracket...

grabcad

free

GE Jet Engine Bracket Challenge

...ge jet engine bracket challenge grabcad original bracket weight = 4.52 lbs. (2.05 kg) redesigned bracket...

grabcad

free

GE Aviation Bracket

...ge aviation bracket grabcad 74% weight reduction from original ...

grabcad

free

Welded GE jet engine bracket

...the weight reduction is only 60,866% equal to the original bracket, but it's welded! original bracket weight: 2.05167kg welded...

grabcad

free

GE Jet Engine Bracket Challenge

...ge jet engine bracket challenge grabcad original design weight: 4.52 pounds (2.05 kg) redesigned weight: 1.36...

grabcad

free

GE Engine bracket Challenge

...ge engine bracket challenge grabcad reduced weight from original ...

grabcad

free

Lightweight bracket

...weight about 440 g, weight reduction compared to the original about 78% maintaining a high resistance to the efforts....

grabcad

free

DUCATI front wheel axle

...high mechanical strength with half the weight of the original steel. axle weight: 180...

grabcad

free

Minimalist bracket

...minimalist bracket grabcad original part weight = 137 kg minimalist weight = 44,1...

grabcad

free

GE Engine bracket modified

...grabcad modified bracket with weight reduction of 33.2% over original ...

grabcad

free

GE Jet Engine Bracket

...bracket grabcad for this material : ti-6al-4v weight for original design : 4.5232 lb and after modify and reduce...

grabcad

free

GE Bracket light weight version

...lighter and a little stronger. mass = 427 grams original part weight = 1946.92...

grabcad

free

Jet Engine Bracket

...nastran solver v1: material ti-6al-4v weight decrease 61% from original to 0.8kg v2: material ti-6al-4v weight decrease 63% from...

grabcad

free

GE Engine Bracket

...v1.1 contest entry in lighter form 1.74 weight savings..from original ...

grabcad

free

GE Engine Turtle Legs

...turtle legs grabcad 80% volume reduction 20% of the original weight approximately 412...

grabcad

free

MountV1

...lbs @ 0.16 lbs/in^3 3.714 in^3 grade 5 titanium original part: 4.52 lbs 87% weight...

grabcad

free

GE jet engine bracket final optimization

...401 g 80.46 % weight reduction comparing to the original ...

grabcad

free

GE jet engine bracket V2

...second and last part, heavier but stronger than first. original weight : 2,052 kg = 4,523 lb weight obtained:...

grabcad

free

GE Challenge engine bracket, ar 29.06.13

...29.06.13 grabcad modified bracket 33.2% reduction in weight over original ...

grabcad

free

Bracket 2° option

...because the weight is about 50% less than the original ...

grabcad

free

Zortrax M200 Extruder- Original

...this is the original zortrax m200 extruder. the complete weight is 740g. this design can be used as a...

grabcad

free

GE jet engine bracket contri

...grabcad volume = 19.78 cubic inches same strength as original with some weight...

grabcad

free

Ge bracket V 1.2

...doing a bit of rendering i would appreciate it. original part weight = 1946.92 grams modified weight = 463.26...

grabcad

free

GE jet engine bracket V1

...it than prototype. a second version should be uploaded. original weight : 2,052 kg = 4,523 lb weight obtained:...

grabcad

free

GE Jet Engine Bracket Improve II Plan

...* ge jet engine bracket challenge * * * original mass: 2089.266 g improve i mass: 472.672 g the...

grabcad

free

GE Jet Engine Bracket Improve I Plan

...* * ge jet engine bracket challenge * * original mass: 2089.266 g improve i mass: 444.987 g the...

grabcad

free

GE Concept 2B

...the concept is a 56.8% weight reduction from the original ...

grabcad

free

ALCOA Aircraft Bearing Bracket

...gr, which means a weight reduction of 74,91 % (original design weight was 859 gr). everything is in the...

grabcad

free

Spare part for vertical blind weight

...plastic, transport costs and is even cheaper than that original spare part. material: petg weight: 2 grams printing time:...

grabcad

free

GE Engine Bracket. Ver. 1

...bracket. ver. 1 grabcad modified: 3.142 lbmass, 19.637 in^3 original 4.523 lbmass, 28.269 in^3 30.5% weight...

grabcad

free

GE BRACKET - 03 - AJC

...submission, and is all within the envelope of the original ge part, i have reduced the weight compared to...

grabcad

free

jet bracket competition

...the weight and volume by 51% compared to the original ...

grabcad

free

modified barrel weight for unique des/69-U with picatiny and compensator

...this design of a barrelweight is modified from an original for intended use with a reddot sight. material...

grabcad

free

Bracket

...in fusion 360, it is 52 percent of the original weight with the same mechanical properties. it is just...

grabcad

free

GE Bracket 1lb - 78% mass reduction

...ge bracket 1lb - 78% mass reduction grabcad assuming original part made of ti64 at weight of 4.55lbs, this...

grabcad

free

Lattice/Porous structured Helmet

...lattice/porous structured helmet grabcad the original helmet model was downloaded in grabcad website and imported...

grabcad

free

rear stabilizer with two shock springs

...shock springs grabcad it has two shock springs, the original ones. the brakets are substitute by one piece. all...

grabcad

free

GE Bracket v2

...ge engine bracket mass: 2.274 lbmass volume: 14.214 in^3 original 4.523 lbmass, 28.269 in^3 49.7% weight...

grabcad

free

Trail 1

...the new model with 50% weight reduction from the original model and withstanding with all load conditions . considering...

grabcad

free

GE Jet Engine Bracket for DMLS

...ge jet engine bracket for dmls grabcad 4.5lb original weight. 1.68lb new weight. part to be made by...

grabcad

free

Topology Optimized GE Bracket

...in a mix of spaceclaim and pro/e. 13% the original weight and fully...

grabcad

free

Universal Joint_TC2C15_Lite weight

...universal joint_tc2c15_lite weight grabcad thx to the original desiner - just added render and 3dpdf true constant...

grabcad

free

Light weighting/Material savings in Fashion Industry

...used light weight techniques i.e., adding lattices to the original products so that weight can reduced as well as...

grabcad

free

Light weighting/Material saving designs in Fashion Industry

...used light weight techniques i.e., adding lattices to the original products so that weight can reduced as well as...

grabcad

free

GE WAVE BRACKET

...mass: 0.4kg - 0.881lb reduction of weight respect the original solution 80%. at the moment i have performed only...

grabcad

free

Ge bracket version 5.1

...required simulations as required with max stress of 109ksi original mass 2052g optimized mass 541g weight reduction...

grabcad

free

Baja Part Clutch

...útil do rolamento. desvantagem maio peso. o dobro da original de plástico. component scale rc baja 1 / 5....

grabcad

free

Tonsen CNC Engraver Router Upgrade

...grabcad this router model has several modifications to the original most notably is the spindle holder and newly added...

grabcad

free

GE BRACKET - 07 - AJC

...( http://grabcad.com/library/ge-bracket-02-ajc-1 ), this one now fits within the original part envelope. i have reduced the weight further by...

grabcad

free

AMTech Bracket

...after redesign. about 63% weight saving if compared to original design. fem validation by means of abaqus software. minimal...

grabcad

free

GE BRACKET - 01 - AJC

...and increase strength. material volume is 46% of the original part, a reduction of 54%. basic stress testing shows...

grabcad

free

Lever safety valve

...normal value. the valve then returns back to its original closed position. the required weight w at the end...

grabcad

free

MAT SOLAIRE 600W - 600W SOLAR MAST

...- 600w solar mast grabcad weighted base version full original folder freely available on : seretudes.com including : all...

grabcad

free

structure AD03 - By Adriano Ordoz Barissa

...grabcad simple entry, also keeping the dimensions of the original model 150mm wide by 55mm high. the piece is...

grabcad

free

GE BRACKET - 02 - AJC

...reduced by 59% in this model compared to the original ge...

grabcad

free

Impreza WRX STI rear brake rotor DBA-2655

...suzuki vitara. but it may be rolled back to original by undoing some cuts. absolutely precise: both dimensions and...

grabcad

free

ElevenSix Coil Shock

...shock grabcad push industries 2015-2016 mtb coil shock, when originaly produced each unit was tuned and configured for a...

grabcad

free

GE Jet Engine Bracket Challenge

...voids. the weight reduction is 80.8% compared to the original ...

grabcad

free

Tremor Dampening Watch

...to increase mass and improve location 1) watch - original concept 2) bracelet - wear on wrist (convenient, but...

grabcad

free

Gulfstream G650ER

...g650, but it's 500 nautical miles farther than the original g650. therefore, gulfstream is allowing g650 owners to upgrade...

grabcad

free

Bus Floor

...in achieving 25% weight reduction. the bus floor was originaly designed in catia v5 and the simulation was carried...

grabcad

free

OBUU Structural Support - Design 2

...means a saving of 247,8 kg compared to the original -stress report in...

grabcad

free

GE BRACKET - 06 - AJC

...( http://grabcad.com/library/ge-bracket-01-ajc-1 ). this one now fits withing the original part envelope. part as before has been skinned on...

grabcad

free

Campervan (Mercedes Sprinter III, 170")

...campervan (mercedes sprinter iii, 170"). the aim of the original design for 4 people and a dog was simplicity,...

grabcad

free

STEAM HAMMER

...cwt (50.8 kgs) .-- parts were copied from the original hammer works but currently adapted to compressed...

grabcad

free

Super 400 PLUS

...motor, so there may be some differences from the original the weight is close to the real model. i...

grabcad

free

3D printed braiding machien

...3d printed braiding machien grabcad not my design. original publisher is now gone, so i'm keeping these beautiful...

grabcad

free

LAB2 Lightweight Twin-Boom UAS v1r0 (a)

...lightweight twin-boom uas v1r0 (a) grabcad lab2 is an original uas design concept. this design is in the early...

grabcad

free

T.O.P. Racing Photon Evo2

...this was a minor set of upgrades from the original photon as a sort of "mid-cycle" upgrade to the...

grabcad

free

SG90 Micro Servo Motor (Original Size)

...motor (original size) grabcad tower pro sg90 9g * weight 9 g * stall torque: 1.8 kgf·cm * operating...

grabcad

free

Black Diamond Crampon Base Redesign

...when printed out of carbon filled nylon versus the original cast aluminum base. setup to take either mono, mono...

grabcad

free

Stand for Arduino UNO R3

...chinese clone, they are a little off from the original ones (check the upper right corner). the model was...

grabcad

free

Redesign the Structural Support - AD04 - by Adriano Barissa

...eliminate the torc force that was exerted in the original model. keeping the holes aligned to the center of...

grabcad

free

Exporer SUP

...i have tried to keep each part within the original printer requirements. the board is slightly shorter than what...

grabcad

free

P-51 Mustang based 3D Printable RC Plane

...3d printable. some changes have been made to the original design to make it more streamlined. span -1000mm weight-...

grabcad

free

Bearing Bracket Version 1

...design weight is 252 g. i also compered the "originalquot; result and "optimized" result at exactly with the same...

grabcad

free

GE-BRACKET - 08 - AJC

...( http://grabcad.com/library/ge-bracket-03-ajc-1 ). this one now fits within the original part envelope. part as before has been skinned on...

grabcad

free

Starshade Petal

...graphene to aid in even more strength than the original so it can hold up more weight but is...

grabcad

free

Blade Inductrix / Tiny Whoop Frame

...stable frame. the weight is within 0.1g of the original cad will follow depending on how well it works....

grabcad

free

Mud Tank

...oil well drilling to store and purify drilling fluid. original project has drawing package. for clarity the walkway grating...

grabcad

free

Metropolis Metro Underframes Support

...cutouts reinforced with 5mm bent sheet metal plates - original style battery box mounting brackets - original frame mounts...

grabcad

free

Copter Frame V4

...weight reduction of 63% from the 23,16g of the original design space! i also did a 3d testprint in...

grabcad

free

Same, same but different :-)

...and not everything can be built without distortions ;-). original weight: 2038g new weight: 424g mass saved: 79,2% fea...

grabcad

free

GE jet engine bracket

...times of production. the changes i've made to the original file resulted in a weight reduction of 77.5%. i...

grabcad

free

Ride II Bracket

...an average wall thickness of around 2.5mm all over. original part mass: 2051g new part mass: 467g reduced by...

grabcad

free

The mower is lateral offset.

...+ 90 ° and -65 °. the work includes: original 3d models and drawings in kompas-16, step, dxf for...

grabcad

free

E Clip - E gripper - E Lock

...clip - bowed special inch or metric: inch shaft diameter: .744" allowable corner chamfers: .062 allowable corner radii: .057

grabcad

free

Ceramic ISOtruss 1 curved

...serves as decorative art for the engineering mind. the original isotruss is not my design, but this version i...

grabcad

free

GEPRC Mark 4 7in Frame

...geprc mark 4 clone. should be identical to the original frame. arms are sized for 7in props. despite the...

grabcad

free

Alcoa Bracket Challenge

...reduced the weight by 66% in comparison to the original product. a design review with protolabs has led to...

grabcad

free

Optimized Alcoa Bearing Bracket V1.0

...i choose that method because i see that the original bracket experiencing high stress result for the "inclined 45...

grabcad

free

Tri Cross Beam

...is roughly a 72 % weight saving on the original 282.5 kg design. while i cannot give an exact...

grabcad

free

GE WAVE BRACKET 2.0

...cases with a good weight's reduction (0.715kg) respect the original part (2.038kg) so i summarize the results: weight reduction:...

grabcad

free

Cinedeck ZX Road Case

...for cinedeck zx ingest servers. the case style was originaly designed for now-ancient digibeta decks. those decks fit sideways...

grabcad

free

RC 3D Printed Lazy Bee

...ribs coupled in corners by wooden beams. covering is originaly meaned as a 3d printed film. only one half...

grabcad

free

Cable Car Wheelset

...car wheelset grabcad re-designed wheelset for cable car restoration. original plan was to use an existing pattern for an...

grabcad

free

Redesign bracket version 2.0

...model with requirement of laser/powder bed manufacturing method 4.keep original fix base to minimize pressure of bracket on master...

grabcad

free

Optimized Bearing Bracket Version 2

...design weight is 279 g. i also compered the "originalquot; result and "optimized" result at exactly with the same...

grabcad

free

Copter Frame V3

...weight reduction of 49% from the 19,76g of the original design...

grabcad

free

Airplane Bearing Bracket Challenge

...or .84 lbs which more than half of the original ...

grabcad

free

Teknomotor C41/30 SB and DBL

...teknomotor c41/30 sb and dbl grabcad original model from wolf: https://grabcad.com/library/teknomotor-c41-30-c-dbl-er20-1 one of the best brands...

grabcad

free

Mil Mi 6 Helicopter

...that has been fixed up a lot from the original cad format, still needs...

grabcad

free

Peteca

...ct its trajectory when thrown in the air. the shuttle was used by indians as sports activity to gain body heat during the winter.

grabcad

free

OBUU Structural Support - Design 1

...needed, just holes on standard profiles. in addition, the original fittings to the structure of the train have been...

grabcad

free

Quadcopter hollow design

...thought velcro straps would be used. i modified the original to add adhesive backed velcro. (filled the two inner...

grabcad

free

Centaur 60cc Petrol Engine

..."no password" required to open these shared files. free original plans available from model engineer:...

grabcad

free

Metropolis support

...price. total weight of this model is 45,805 kg (original 47,45 kg). max stress is 59,2...

grabcad

free

ETW - Centaur 60cc Petrol Engine

..."no password" required to open these shared files. free original plans available from model engineer:...

grabcad

free

1.75 Modular Rocket (Lightened Design)

...modular rocket (lightened design) grabcad i can't find the original place where i got the base files, but i...

grabcad

free

water tank ThermalTake CL-W0009

...job , all the dimensions are taken from the original resized hole fittings . fitting for 12mm rigid tubing...

grabcad

free

Claw/Landing Gear Accessory

...to the fv and make the use of the original landing gear impossible. in my design, the fv is...

grabcad

free

Elemental Design #2

...of new design is 1.66 pounds overall weight of original design is 4.61 pounds percentage of weight reduction is...

grabcad

free

Coupled pendulum (longitudinal)

...coupled pendulum (longitudinal) grabcad original project made with autodesk inventor 2014 as a dynamic...

grabcad

free

Alstom alternative support

...amount of welding has been reduced by ¾. the original support beam design is said to weigh 282kg/set of...

grabcad

free

Citroen C4 Picasso with Parallel Architecture

...the powertrain of the mercedes is modified replacing the original v8 with a inline 4 and scaling it to...

grabcad

free

Walk-resistance measuring machine

...pattented, designed and manufactured by nakis construction ltd. this original laboratory equipment has been designed to accurately measure the...

grabcad

free

Lightweight bracket (v2)

...the masses while maintaining the maximum size of the original footprint to preserve high moments of inertia. the result...